AMBALA, Haryana, India
Our product range comtains a wide range of Burette Stand, Burette and Funnel Stand, Ballistic Galvanometer, Thermostatic Water Bath and Model Of D.n.a.
BALLISTIC GALVANOMETER Useful for measurement of small quantities of electrical charge, the moving coil is suspended by a phosphor bronze strip, which carries an optically true concave mirror. The coil can be raised, lowered or set to zero by an adjusting knurled knob at top. A knob at back is provided for clamping and releasing the coil. With levelling screws.
Constant temperature Water Bath is fabricated of stainless steel sheet chamber and bodymade of mild steel sheet. Two full view glass windows are provided for viewing objects while inoperation. Heating is done by means of tubular type heaters fitted on top of the bath. An electricoperated stirrer fitted with stainless steel shaft and blades is provided to maintain uniformtemp. Temperature is controlled from 5°C above ambient temperature.
(Deoxyribonucleic acid) Model showing segment of D.N.A. molecule mechanism of replication, to show the double helix coiling and reforming, nucleiotides and the structural formula to show the molecular shapes and bonds and angles distorted. Completed model arranged on a board, fully labelled.
BALANCE ANALYTICAL Suitable for research laboratories or precision work, Short triangular beam, with rider scale. The beam supports are extended and relieve the agate knife edges when at rest. Pillar is highly finished and removable pans area suspended by stirrups from double hooks. The balance is mounted in a polished wooden case, fully glazed. Complete with rider slide, levelling screws. Capacity 200 gm, sensitivity 0.1 mg.
WATER BATH SEROLOGICAL Double walled, inner chamber of stainless steel, outer made of stove enamelled mild steel, with insulation in between, thermostatic temperature control form 50 C above room temperature to 950 C with accuracy +0.5° C. Bath has a stainless steel dome cover, perforated and removable shelves, drain plug two indicator lights, thermostat control knob, heater with automatic cut out. . Works on 220- 240 V 50 Hz. Supplied without racks.
WATER BATH, PRECISION Double walled, inner chamber made of stainless steel, outer chamber made of stove enamelled mild steel with insulation in between. Temperature is controlled by thermostat from 5°C above room temperature to 95°C, ± 0.2° C . Stirrer is s provided for continuous stirring, and a front glass window on one side for visibility of the sample Supplied with contact thermometer stirrer with 120 H.P. high speed motor and speed regulator. Works on 220-240 V, 50 Hz.
Ideal for student use and routine work. For cutting paraffin embedded specimens of comparatively soft tissue. It will cut long ribbons of sections from specimens not exceeding 20mm diameter and, using wood blocks, sections of specimens up to 18x25mm may be cut. The thickness of the sections may be varied between 2 and 24 micron. With simple object holder, knife and honing stone.
PRESSURE OF LIQUID APPARATUS Glass tube with plunger having a bulb at the bottom. The bulb has holes around its circumference and glass piston .The jet of the liquids from the orifices at different heights of the container demonstrate the characteristics of the pressure exerted by a liquid on the walls of its container.
LIQUID LEVEL APPARATUS COMMUNICATING VESSEL Four glass tubes of different shapes and size mounted vertically above a horizontal communicating tube for liquid level demonstrations. Vessels of different sizes on a plastic base.
Made of unbreakable high quality PVC and hand painted with non-toxic colors in a scientifically correct manner. Life size model which demonstrates the entire digestive system in graphic relief. Features : Nose, Mouth cavity and pharynx, Esophagus, GI tract, Liver with gall bladder, Pancreas, Spleen The duodenum, cecum and rectum are opened. Mounted on plastic baseboard, length approx. 900 mm, width approx. 320 mm, thickness approx. 120 mm. It is supplied with detailed instruction cards mounted on the board and conforms to the main EU safety standards
WATER BATH, RECTANGULAR Double walled inner chamber made of stainless steel, and the outer made of stove enammeled mild steel.Top has 75 mm holes with concentric rings. Temperature range upto 100° C., accuracy ± 1 ° C., Heater fitted with automatic cut-out device, thermostat, two indicators lights, workable on 240 Volts.
Enlarged 20.0000 times. Made of unbreakable high quality PVC, hand painted with non-toxic colors in a scientifically correct manner. The model shows all the structures of the animal cell: nucleus, endoplasmic reticulum, Golgi apparatus, centrioles, lysosomes, fat vacuoles. Mounted on a plastic base, length approx. 530 width approx. 380mm, thickness approx. 160mm. It is supplied with detailed instruction cards and conforms to the main EU safety standards. Made of unbreakable high quality PVC, hand painted with non-toxic colors in a scientifically correct manner.
A heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution on the drive wheel, the feed panel engaged the teeth of rachet wheel which advances the object holder through cone and inclined plane mechanism tissue sections can be cut down to even 1 micron. A safety device automatically disengages the feed mechanism. Feed indicator is in front and fed setting is an back of microtome which sets 1 to 50 micron. A razor 120mm made from heat treated steel and tested for Micro structure is supplied with instrument. There is an arrangement to tilt angle of the razor adjustable upto 30° on a reference scale.
A useful tool for cutting think sections for microscopic examination. Its action is based on a differential screw which moves the table and the specimen fixed to it by 0.01mm for each graduation on the screw drum. One complete from Brass with chemical blackened graduated drum. Supplied complete with stiff, single edged razor blade.
It is of immense use for Medical Institutions, Research Laboratories etc. and gives very good results for cutting thin sections. It is mounted on a heavy cast iron base to ensure rigidity and long life. The housing gives maximum protection to the mechanism against dust and paraffin waste etc. It is driven by handle which can be locked in position. The cutting section obtained by mechanically operated crank can be adjusted in steps of 1u to 25u by means of a knurled knob on the front of the instrument. The efficient ball and socket lamp renders if possible to interchange specimen clamp and paraffin stage with a single motion. The knife work is equipped with a rotating knife, hanging plate, three object holders and oil can.
WATER BATH RECTANGULAR ELECTRIC Single wall, chamber made of stainless steel, having 75 mm holes and concentric rings at top with tubules for water level arrangement, 1 kW heater wit cut-out device, Complete with connector plug and 1 metre of 3 core cable.