Our Products
Colgrad Circulating oil are manufactured from specially selected base oil duly forthfied with adequate quantities of correct additive and Rust Inhibitors for use in enclosed systems. They have very good demulsibility and antifoam characteristics. involving steel components. The excellent lubrication and CoIgrad Circulating oil are available in viscosity grade ranging form 32 to 460 .
Colgrad Cir 32 To 460
Characteristics | Test Method | 32 | 46 | 68 | 100 | 121 | 150 | 220 | 320 | 460 |
---|---|---|---|---|---|---|---|---|---|---|
Density at 15 | D-1298 | 0.87 | 0.75 | 0.880 | 0.89 | 0.90 | 0.90 | 0.91 | 0.92 | 0.92 |
Flash Point C | D-92 | 190 | 200 | 210 | 220 | 220 | 230 | 230 | 240 | 240 |
Viscosity at 40 Degree cst | D-445 | 32 | 46 | 68 | 100 | 121 | 150 | 220 | 320 | 460 |
Viscosity Index | D-2270 | 95 | 95 | 95 | 95 | 95 | 90 | 90 | 90 | 90 |
Semi Synthetic SN-160 is water soluble Semi Synthelit. Cutting Lubricants specially formulated for getting the higher sump life with excellent workability on High Speed machining. It's Super micro near transparent emulsion make, it outstanding in its. range. Semi Synthetic SN-160 is formulated with utmost care using quality Ingrecitents, It is soluble in water is bio stable and synthetic in nature. This product is environment friendly as it does not contain any heavy metal. It gives, excellent flushing which reduces tour grinding wheel dressing frequency, thus giving more productivity. it is best for ferrous metals.
Colgrad Glass Mould Oil are non-graphite type glass mould oils used for de-moulding in glass moulding industry. The oils are blended from highly refined base oils and specially selected additives. They provide instant de-moulding performance with good surface finish to the moulded products without any colouration of the glasses. They are non-toxic and do not cause fuming during use with unique property of inherent lubricity, low evaporation loss and moderately high fire points.
Greases should have high drop point to withstand high iticr.peratur, . The non-soap greases are found to have high drop points and are made by rang oil in a bentonite base. Solid lubricants eg_ molybdenum di-sulphide and graphite also withstand high temperature and are therefore incorporated in greases designed for high temperature applications.
High Temperature Greases are made with a ingredients to meet the varied end use requirements. These greases also have excellent load carrying ability and give good performance even under shock load conditions.
High Temperature Greases are premium greases manufactured from high quality base oils and additives. These greases have been specially formulated for the lubrication of bearings at high temperature locations
High Temperature Greases are available in the following grades. lubricating plain bearings subjected to - z- oera, re. Me grease act a vehicle for conveying the graphite to the right location.
HT Grease (BN) is a dispersion of bentonite base gel in a heavy bodied mineral oil and has a very high drop point. It does not flow out of the bearings even at high temperatures. It also is not acted on bt miid acids and alkalies.
Offer the below mentioned Benefits :-
Introduction : Neat Culling oil manufactured from highly refined base stocks of medium viscosity and fatty oily for improved wetting characteristics to impart good heat dissipation characteristics, and also with active sulphur and chlorinated additive to impart EP properties. Its light colour provides good vasibility of machining operations.
Appliction : Neat Cuffing Oil is recommended for heavy duty applications like gear hobbing, thread cutting, less severe machining operations on high tensile steel stainless steel and some alloys.
A thoroughly researched and developed metal working lubricant, expertly formulated by , t company specializing in manufacturer's chemicals, is the only way to assure the furl performance of any metal forming operation. Demands for higher manufacturing output-in ever-narrowing time frames continue to increase within every sector of industry. Matching these demands is the need for superior high film strength drawing and stamping oils and lubricants formulated specifically for these modern challenges. We will fully evaluate your operations, discus., all available options. find ideal solutions and provide the best metal working lubricants and customer service in the industry.
Colgrad Draw is a medium viscosity, chlorinated, heavy duty forming fluid. It is a blend of high performance extreme pressure and lubricity additives in a fully solvent refined mineral oil.
Application is specially formulatd for use in heavy duty deep drawing applications where extreme performance is required.
It is suitable for use on medium to heavy gauge steels, stainless steelm and nickel alloy steels, as well as aluminium and aluminium alloys.
Colgrad Draw is also recommended for use in stainless steeel and alloy steel tube cold pilgering operations, where it is applied as an outer diameter roll lubricant, as well as machine gear box lubricant.
Advantages contains high performance, extreme pressure additives, which provide very high resistance to temperature and pressure, and high resistance to wear. Enhance tool and die life, cuts downtime and reduces tooling costs.
Provides a homogenous and tenacious lubricating film. Maintains excellent performance in high through put, or multi stage operations. Consistent, high surface quality.
Flexibility, suitable for use on a wide range of applications and materials. Allows potential for product rationalization.
Low odour and light colour. Excellent operator acceptance.
Cutting oils are useful for all metal and machinery operations and these oil, are known to perform better than traditional sulphur and chlorine oils, It protects from rust and corrosion and are used numerous small scale as well as large scale production industries, Cutting oil uses natural and synthetic sources of phosphorous to achieve levels of lubricity never seen before.
Colgrad Cool-150 is a Multi purpose water soluble coolant giving milky white stable emulsion. The product is designed for machining and grinding of ferrous as well as non ferrous materials. The product is formulated with highly refined base oil fortified with good quality emulsifier, corrosion inhibitors and other performance additive package. The product is operator friendly and gives satisfactory performance in terms of quality of machining over and life of the product with proper maintenance.
Colgrad AP3 Greases are lithium base, high performance greases fortified with surface improvement & extreme pressure additives for lubrication under severe mechanical conditions, shear & hight pressure. The speciality additives, incorporated in the grease reduce friction, and minimize wear & tear, thus enhancing component life.
Application : AP3-1 & AP3-2 are suitable for general purpose and centralized automatic lubrication systems & are recommended for all types of anti-friction ball and roller bearing, operating at high speeds and under heavy and shock loads. These are extensivelly used in power, cement/concreate plants, heavy duty aluminium, copper & steel-rolling mills, nuclear, marine & defence applcations, heavy moving machinery etc.