With the alternative animal keeping (barn management, aviary management and the furnished cages) perches are required for the animals. Lubing Peches meets all the requirements which are put to a perch: The broad, only a little bit arched surface ensures a better hold of the animals on the perch and prevents deformations and illnesses. Moreover the perches are are co-extruded of 2 materials. In the fields important for the throats, a tender slide hampering material is inserted into the perch. Smooth surfaces, the absence of sharp rims and special bondings facilitate cleaning and ensure hygiene in the house.

Especially for the floor keeping, space saving and competitive Conveyor systems are requested. LUBING has responded to this demand and developed a conveyor that complies with these requirements. Of course we keep the LUBING quality. The components are: Mini Drive with integrated pivoting unit , chain tensible at the mini drive or at the idling unit, deflection with integrated pivoting unit, gear motor with torque support can be fitted directly on the drive shaft, conveyor chain made of untreated chain links together with pre-galvanized rods. Slopes up to 28° are possible

The LUBING Top-Climate-System was developed for effective humidifying, cooling and dust binding of the house air. It works according to the principle of the direct evaporative cooling. Through high pressure nozzles water is injected into the house air with a pressure of 70 bar as fog. The fog evaporates immediately and causes the cooling of the house air by extracting heat. This cooling effect saves energy because the ventilation rate can be throttled. During heating periods and after the arrival of young animals the LUBING Top-Climate-System is used for the rise of the humidity to optimum value. The world-wide approved LUBING Top-Climate-System operates successfully with any kind of ventilation system. Even in open houses with only low compulsory ventilation, a considerable improvement of the house climate is achieved. The LUBING Top-Climate-System contributes substantially to the animals’ health and activities with laying hens as well as fattening poultry and rearing. So the medicine application may be reduced.

The tubes and tube bends are easy, reliable and flexible components for the auger conveying. Your feed will be transported to the target without quality losses.   The Advantages at a glance: universal usable for each type of stable for high conveying capacity fast and easy assembling high class Plastic (very high impact and UV-resistance rigid-PVC)

Precise dosage during the desired period Adjustable dosing relationship from 0, 01 to 15 % (in dependence of the flow rate) Measurement and dosage with highest accuracy All assigned parameters are constantly controlled Very easy to handle Additional information: included water counter, works like a water meter including a daily counter indicates the water consumption/day High consistent against many acids Long-livinga

Powdered and thick medicines can lead to deposits in the valve and pipes and causes blockages or leakages if not mixed sufficiently.

With the automatic flushing-system your drinking system is flushed by itself. With the LUBING controller LCW-8 you can flush up to 8 drinking lines separately. This system can be easily retrofitted into existing drinking systems.   Needed components: With the LUBING controller (1) the duration and timing of flushing can be adjusted to individual needs. With that you can adjust the time required for a sufficient flushing depending on the length of the drinking lines and thus avoid water waste also during the flushing. Each drinking line is flushed separately, but it is also possible to flush several drinking lines at the same time by clamping them to the same contact. The solenoid valve of the flush kit (2) is also attached to the supply line of the pressure regulator. The entire unit between the water supply hose and the pressure regulator is delivered pre-assembled.   3. The flush breather unit art. 4255-00

LUBING drinking nipples are made of high-alloy stainless steel. All plastic components are also made of high-quality materials. LUBING drinking nipples and automatic drinkers for rearing chicks are sturdy and precise. They contain no fragile mechanisms. These designs guarantee long life and minimal maintenance. The valve components and large cross-section arrangement provide optimal protection against contamination.   Therefore, LUBING drinking nipples can offer you: A simple, reliable water supply Consistently fresh and clean drinking water Minimum maintenance, care, and cleaning Improved rearing results Problem-free raising for all animal breeds.

Especially for the floor keeping, space saving and competitive Conveyor systems are requested. LUBING has responded to this demand and developed a conveyor that complies with these requirements. Of course we keep the LUBING quality. The components are: Mini Drive with integrated pivoting unit , chain tensible at the mini drive or at the idling unit, deflection with integrated pivoting unit, gear motor with torque support can be fitted directly on the drive shaft, conveyor chain made of untreated chain links together with pre-galvanized rods. Slopes up to 28° are possible

The LUBING drinking system for layers is designed in such a way that it can adapted individually to every layer system. Always hold the optimum water supply of the birds in high regard. Additionally pay attention that the environment affect is less as possible. Splash-water should not lead to corrosion or dampen the manure additionally. Our million times approved LUBING nipples and the extensive accessories, e.g. the perches, air channels and drip cups, underlines LUBING as your most competent partner.

The LUBING evaporative cooling pad system is used in systems where highly efficient cooling is required. It can be used for many different cooling purposes but is particularly suitable for evaporative cooling in poultry houses. Water is circulated through the system by a pump station and supplied to the top of the cooling pad via a water distribution pipe ant the deflector. The water flows down the corrugated surface of the evaporative cooling pad.

The drinking water in the TwinClean Line is continuously circulated inside the drinking line. In addition a pump is installed in the circulation unit, which pumps the water with defined pressure to the upper line of the drinking line profile. The water runs to the end and flows back again in the lower nipple pipe to the pump. A float switch regulates automatically the pump unit. It ensures that the pump do not run without water. As with other LUBING drinking systems, the height of the water column is set at the pressure regulator. The correct height adjustment is measured at the breather at the pressure regulator. The flow rate of the pump can be adjusted with the flow rate controller. The adjustment depends of the installed drinking line length and is only made once with start-up. The balls in the two front breathers indicate the difference of pressure between upper and lower line. The drinking line principle is laidout in such a way that the pressure at the end of drinking line is always higher as in front at the pressure regulator. Therefore drinking line lengths up to 120 m with only one front connected pressure regulator can be realized.