At our semi-automated production line we manufacture Flange Type Rotary pumps, Insert Type Rotary Pumps and Dual Direction (Bi-directional) Rotary Pumps.

Smooth, durable and trouble free operation ensures that the lubrication of various application such Head-Stocks, Gear-Boxes and Re-calculating Units remains optimum and un-interrupted.

Over four decades of hardcore experience in manufacturing state of the art Lubrication Pumps has helped us develop such 100% reliable and quality products which lasts for many years without any trouble. Just to further our commitment to serve you in the best possible way, we at Lubrite Industries has setup a hotline number to ensure that we render our post sales services on just a call from your side.

Lubrite Automatic Single Line Grease Pump consists of Reciprocating Motor Driven Plunger Pump with in built Gear Box. The Pump incorporate a large grease reservoir with a follower plate & tell tale rod. Limit Switch is provided on the top of the reservoir to indicate full and empty level of grease. The pump outlet is connected to Pressure Relief Valve. Bleed Valve is provided on the pump body to bleed air entrapped in the system. Before operating the pump, Bleed Valve is kept open till the continue flow of grease starts from it. The whole system is controlled with Electric Control Panel.

These Pumps with positive displacement of oil are great type and are suitable for different applications such as lubrication of head stocks. Gear Boxes, low pressure hydraulic power packs and recalculating units etc. These pumps are suitable for oil with wide range of viscosity 30-400cst/40 c.

In LUBRITE Grease Radial Pump the Grease Injectors are working unit. Each pumping unit is independent and is actuated by a cam through a Gear Box. The gear box is driven by a Electric Motor. These pumping units are mounted around the Housing of Radial Pump. The pump. The pump incorporate a large reservoir with follower plate and Tell Tale Rod. The pump may rotate in either direction; Grease is pushed down ward with the Follower Plate and Stirrer Assembly. Limit Switch is provided on the top Reservoir to indicate low level of grease in the Pane Box

This is Plungger Type Pump Operated Manually by a lover (handle). The pump housing has inbuilt spool type manual line changer. which directs the grease alternately in the two outlets. The end of each greasing cycle is indicated by rise in pressure through pressure gauge. The Pump is provided with grease reservoir, which has a follower plate and tell tale rod to indicate the level of grease. The pump is also provided with grease filling port, which can be attached to a suitable filling Pump, for charging the Reservoir with fresh grease. The follower plate together with pump filling device eliminates possible formations of air pocktes within the grease.

The Pneumatic Cylinder is buit-in with the Pump and is operated with Pneumatic lines connected to the ports of the cylinder through manual electrical Direction Control Valve.During the forward stroke, greaseis ejected under pneumatic pressure from the outlet port of the pump body and during the reverse stroke of the cylinder grease is sucked through suction port in to the pump body.

Hand Operated Single Shot Pumps are spring returned piston type pumps. The piston is operated by pulling the cam handle. These pumps are suitable for manual centralized lubrication for light duty machines such as Small Power Presses, Die Punching Machines, Grinding Machines, pouch Packing Machines, Pharmaceutical Machines and etc. Normally these pumps are recommended for the machines with lubrication points within 2-20.

These are heavy-duty Grease Pumps and are used where the total no. of points are more than 20 or the lubrication lines are lengthy. To avoid the extra load on operator, the handle of the Pump is extra long and is equipped with Lever system. When the handle is pushed, grease is sucked from the reservoir and is ejected under pressure by pulling the handle out. These Pump are wall mounted and should be installed vertically at a place conveniently accessible to the operator. In case of Plant Lubrication with various machines, the distributors or Progressive Blocks are mounted on each machine and the pump is mounted on the trolley to lubricate the plant with the help of Flexible Hose Pipe and Quick Release Coupling.

The Pneumatic Cylinder is buit-in with the Pump and is operated with Pneumatic lines connected to the ports of the cylinder through manual / electrical Direction Control Valve. During the forward stroke, greaseis ejected under pneumatic pressure from the outlet port of the pump body and during the reverse stroke of the cylinder grease is sucked through suction port in to the pump body. These pumps are wall mounted and should be installed in vertical position at a place conveniently accessible to the operator.Bleed Valve is provided on the pump body to bleed air entrapped in the system. Before operating the pump, Bleed Valve is kept open till the continue flow of grease starts from it. A tell tale rod projecting through the container top indicates the remaining grease at any time. To ensure that Pneumatic lines to the pump is dust & moisture free - Provide Filter & Regulator unit in the air lines

Hand Operated Single Shot Pumps are spring returned piston type pumps. The piston is operated by pulling the cam handle. These pumps are suitable for manual centralized lubrication for light duty machines such as Small Power Presses, Die Punching Machines, Grinding Machines, pouch Packing Machines, Pharmaceutical Machines and etc. Normally these pumps are recommended for the machines with lubrication points within 2-20.

Grease filling gear pump is designed for transferring grease from a barrel to the reservoir of centralised grease lubricating station. the pump which is mounted at the bottom of a long barrel , is driven by a flange mounted motor placed at the top. the inline grease grease filter is provided along with hose for delivering grease