Write a Review
Our Products
Our offered Product range includes Multiline Radial Lubricator and Radial Lubricator.
Multiline radial lubricator is best suited for machine /plant where lubrication is required with high pressure continuously / intermittently for individual point. This lubricator are used for machine / plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, spong iron plant etc. This lubricator comprise of a single pumping station having a number of plunger pump placed radically and fitted on to the outer periphery of the housing. Each plunger unit is given a reciprocating motion with the help of a cam. The cam rotates with the help of an electric motor and speed reduction gear box. The dose per plunger pump / cycle is 0.05 to 0.25cc (adjustable) with maximum pressure 200 Kg/cm2. These all plunger pump are connected to the lubrication point directly / progressive block by mean of tube, rubber hose, compression type fitting, clamping etc. Grease filling in the reservoir can be done manually as well as with the help of other pump. For pump BSP port is provided on reservoir. Always use proper & clean lubricants. Avoid foreign particles in the pump. The foreign particles or dust items are the main responsible factor to damage physical components of the pump and chocking in the plunger body. Always fill the lubricants before it is empty to avoid air in the pump. The presence of air may be resulted in improper quantity of discharge. Should always careful with regular maintenance of plungers and reservoir for its long life. Do not plug out put of any pumping unit.
|
Model |
LM RL-5-6 / LM RL-5-6 (LX) |
LM RL-10-6/LM RL-10-6(LX) |
LM RL-15-12/LM RL-15-12ILX) |
|
Reservoir Capacity |
4 Ltrs. |
10 Ltrs. |
15 Ltrs. |
|
No. of pump elements |
6 Pump elements |
6 Pump elements |
12 Pump elements |
|
Discharge of Pump/cycle (Adj.) |
0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. |
0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. |
0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. |
|
Gear Box reduction ratio |
60:1 |
60:1 |
60:1 |
|
Power of motor |
0.25- H.P. 415 Volt AC, 3 Phase |
0.25- H.P. 415 Volt AC, 3 Phase |
0.25 H.P. 415 Volt AC, 3 Phase |
|
Motor rpm |
1440 rpm syn. |
1440 rpm syn. |
1440 rpm syn. |
|
Working Pressure Oil/Grease |
200/300 Kg/Cm2 Maximum. |
200/300 Kg/Cm2 Maximum. |
200/300 Kg/Cm2 Maximum. |
Supplier & Manufacturer of 12 24 V DC Radial Lubricator. Our product range also comprises of Motorised Lubrication Units, Grease Lubrication System and Air-Oil Mist Lubrication System.
Mr. A. K. Yadav (Lubsa Multilub Systems)
Plot No.1870, Dabua Gajipur Road, Near Bhardwaj Medical Store, Nit, Faridabad, Haryana - 121001, India
Share us via
