Pumps, Pumping Machines & Parts #5428925

Self priming monoblock pump, Self Priming Monoblock Pumps, are available in 0.5 HP and 1.0 HP, 3000 RPM. This pump is manufactured as per IS 8472 (Centrifugal Regenerative Pumps) and used for Water supply.Salient Features Pump casings, Motor bodies and End covers are made of close grained cast iron.The motor is totally enclosed fan cooled (TEFC) type as per as per grade FG 200 of IS: 210.Insulation Class B insulation.Motor windings are vacuum inpregnated with synthetic varnish for better moisture resistance.High tensile brass forged impeller used to give troublefree service.Better insulating materials used to withstand temperature rise.

Application

• Domestic Water Supply
• Drip Sprinkle Irrigation
• Agriculture
• High Rise Buildings & Bungalows
• Fountains
• Industries

Salient Features

• Motors designed for operating under wide voltage variation.
• Sleeves and thrust bearings designed for longer life.
• Stainless steel motors, having hydraulically pressed powder coated silicon laminated stampings.
• Powder coated rotors for corrosion resistance.
• Rotors and all rotating components are dynamically balanced for long bearing life and vibration-free running.
• After metallurgical testing, all components are manufactured on modern machines, including CNC machines for reliability and consistent quality.
• Motor Body : Stainless steel.
• Rotor : Powder coated , suitably baked for corrosion resistance under water , dynamically balanced for vibration-free smooth operation.
• Stator : Powder coated for corrosion resistance. To protect windings, thick end laminations are provided.
• Windings : High dielectric PVC/Polyester insulated, water cooled asperIS:8783 (Part4/Sec.1&3)
• Cable Sealing Arrangement : Cable glands, rubber seal and sand guard are provided to protect the motor, from ingress of borewell water and other foreign matter.
• Breather Diaphragm : Optimum size to compensate the volumetric variation of water inside the motor due to change in temperature.
• Impellers : High quality abrasion resistant Stainless steel , dynamically balanced.
• Bowl : Cast Iron as per FG200 Grade of IS:210.
• Journal Bearings : Leaded bronze / Nitrile Rubber water lubricated bushes, having high load bearing capacity.
• Thrust Bearings : Special self-aligning heat-treated S.S. segments are water lubricated to withstand high axial thrust load under adverse conditions.
• Shaft : Hard, annealed Stainless steel shaft of adequate diameter to ensure rigidity is ground to microns.
• Suction Casing : Provided with perforated Stainless steel strainer of adequate size to allow suction of water with minimum friction.
• Casing Wear Rings : High quality abrasion resistant Nitrile rubber.

KALSI AquaBoost Pressure Booster System delivers water with uniform and constant pressure in all showers and taps both for single storied or multi-storied buildings. AquaBoost system develops pressure and maintains a uniform pressure in the pipelines for effective water utilization. The Pressure switch monitors the pressure in the system and will switch the pumpset ON and OFF automatically based on demand. The system is supplied with Horizontal Multistage Centrifugal Pumps or Shallow Well Jet Pumps. The system consists of high quality pressure tank, pressure switch and other accessories.

Application

• Domestic Pressure Boosting applications
• Pressure Boosting Applications Multistory Buildings, Residential Apartments, Hotels etc
• Lawn sprinklers, Fountains and Small Farm irrigation.

Salient Features

• Proven Performance and Durability
• Reliability, Rugged and Compact in construction
• Energy efficient motors
• Noiseless Operation
• Low power Consumption
• Automatically ON and OFF (Based on demand of the system when taps are opened and closed)
• Ease in maintenance
• Eliminate overhead tanks (where uninterrupted power supply is available)

Constructional Details

PARTICULARS	DETAILS
MOTOR
Motor body	Cast Iron / Aluminum
Rotor shaft	Stain less Steel
PUMP
Pump shaft	Stainless steel
Diffuser	Stainless steel / Cast Iron
Stage casings	Stainless steel
Impeller	Polypropylene Oxide (PPO)/Brass
Sealing arrangements	Mechanical seal
Suction bracket	Cast Iron
SYSTEM ASSEMBLY
Five way Connector	Brass
Non Return Valve	Brass
Pressure Tank	MS EXPOXY Coated with High Grade Butyl Rubber
Pressure Switch	Fitted with Single Pole Double Throw Switch
Pressure Gauge	Bourdon Type