M-Tech Pump

Vavdi, Rajkot, Gujarat

SAILENT FEATURE :

• Easy To Install
• No suction Problem
• Save Electricity
• Easy To Maintain
• Work In Low Voltage

APPLICATION :

• Srilankar And Drip Irrigation System
• Pumping From In-Well Bore
• Pumping From Surmps For High Rise Bulding & Industry
• River & Canal Lift-Irrigation
• Openwell Pumping For Agriculture & Irrigation

FeaturesMore durabilityHigh operating efficiencyDesigned for wide voltage operation. (also working in low voltage)Corrosion-resistant Graded Cast Iron with CED CoatingElectrical grade sheet stamping for low power consumption and long lifeStainless steel 410 grade rotor and pump shaftsGlass Fielled Noryl Pump Bowl and impiller for Better performance & long-lifeSpecial Carbon thrust bearingOil seal for better protection of motorSpecially processed 3 layered (Polyster+2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistanceSpecial sleeve joint between wire and cableEpoxy coated Rotor to protect stamping against corrosionDynamically balanced Impellers and RotorsAll components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyDesigned for wide voltage operation. (also working in low voltage)Corrosion-resistant Graded Cast Iron with CED Coatingelectrical grade sheet stamping with C6 coating for low power consumption and long lifeStainless steel 410 grade rotor and pump shaftsGlass Fielled Noryl Pump Bowl and impiller for Better performance & long-lifeSpecial Premium Carbon thrust bearing plate and SS counter plateElectrically designed to lower power consumption and operating cost.Oil seal for better protection of motorSpecially processed 3 layered (Polyster+2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistanceSpecial sleeve joint between wire and cableEpoxy coated Rotor to protect stamping against corrosionDynamically balanced Impellers and RotorsAll components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyDesigned for wide voltage operation. (also working in low voltage)Corrosion-resistant Graded Cast Iron with CED Coatingelectrical grade sheet stamping for low power consumption and long lifeStainless steel 410 grade rotor and pump shaftsGlass Fielled Noryl Vergin Pump Bowl and impiller for Better performance & long-lifeElectrically designed to lower power consumption and operating cost.Special Carbon thrust bearing plate and self aline tilting segment baseOil seal for better protection of motorSpecially processed 3 layered (Polyster+2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistanceSpecial sleeve joint between wire and cableEpoxy coated Rotor to protect stamping against corrosionDynamically balanced Impellers and RotorsAll components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyDesigned for wide voltage operation. (also working in low voltage)Corrosion-resistant Graded Cast Iron with CED CoatingCRNO M47 electrical sheet stamping with C6 coating for low power consumption and long lifeStainless steel 410 grade rotor and pump shaftsSS 304 grade sheet metal Bowl and impiller for Better performance & long-lifeSpecial Carbon thrust bearing plate and self aline tilting segment baseElectrically designed to lower power consumption and operating cost.Oil seal for better protection of motorSpecially processed 3 layered (Polyster+2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistanceSpecial sleeve joint between wire and cableEpoxy coated Rotor to protect stamping against corrosionDynamically balanced Impellers and RotorsAll components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyDesigned for wide voltage operation. (also working in low voltage)Corrosion-resistant Graded Cast Iron with CED CoatingElectrical grade sheet stamping for low power consumption and long lifeStainless steel 420 grade rotor and pump shaftsGlass Fielled Noryl Vergin Pump Bowl and impiller for Better performance & long-lifeElectrically designed to lower power consumption and operating cost.Special Carbon thrust bearing plate and self aline tilting segment baseOil seal for better protection of motorSpecially processed 3 layered (Polyster+2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistanceSpecial sleeve joint between wire and cableEpoxy coated Rotor to protect stamping against corrosionDynamically balanced Impellers and RotorsAll components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyInduction motors are easily re-windable using multi layer PVC insulated wire for better reliability.Bowl made up with SS304 grade SS Material.Impiller made up with SS 410 grade SS Material.Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.Electrically designed to lower power consumption and operating cost.Non-magnetic, corrosion-resistant high-grade stainless steel stator body.LTB-4 Bronze Bush is made with additional centrifugal molding process and 2 % Nickel is added.Dynamically balanced rotating parts to ensure minimum noise and vibration.Hydraulic parts are made with Investment Casting or Die-base molding process, which gives higher performance and higher efficiency.Individually and accurately balanced impeller gives better performance for lower power consumption.The pump shaft is made of stainless steel hardened and ground to close tolerance.Epoxy coated Rotor to protect stamping against corrosionThe entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyInduction motors are easily re-windable using multi layer PVC insulated wire for better reliability.Bowl made up with FG 260 grade cast iron.Impiller made up with SS 410 or SS 202 stainless steel material.Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.Electrically designed to lower power consumption and operating cost.Non-magnetic, corrosion-resistant high-grade stainless steel stator body.LTB-4 Bronze Bush is made with additional centrifugal molding process and 2 % Nickel is added.Dynamically balanced rotating parts to ensure minimum noise and vibration.Hydraulic parts are made with Investment Casting or Die-base molding process, which gives higher performance and higher efficiency.Individually and accurately balanced impeller gives better performance for lower power consumption.The pump shaft is made of stainless steel hardened and ground to close tolerance.Epoxy coated Rotor to protect stamping against corrosionThe entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyInduction motors are easily re-windable using multi layer PVC insulated wire for better reliability.Bowl made up with SS304 in SS model and FG 260 grade cast iron in CI model.Impiller made up with SS 410 / Nylon(with ss neckring).Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.Electrically designed to lower power consumption and operating cost.Non-magnetic, corrosion-resistant high-grade stainless steel stator body.LTB-4 Bronze Bush is made with additional centrifugal molding process and 2 % Nickel is added.Dynamically balanced rotating parts to ensure minimum noise and vibration.Hydraulic parts are made with Investment Casting or Die-base molding process, which gives higher performance and higher efficiency.Individually and accurately balanced impeller gives better performance for lower power consumption.The pump shaft is made of stainless steel hardened and ground to close tolerance.Epoxy coated Rotor to protect stamping against corrosionThe entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump.

FeaturesMore durabilityHigh operating efficiencyInduction motors are easily re-windable using multi layer PVC insulated wire for better reliability.Bowl made up with FG 260 grade cast iron.Impiller made up with SS 410 or SS 202 stainless steel material.Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.Electrically designed to lower power consumption and operating cost.Non-magnetic, corrosion-resistant high-grade stainless steel stator body.LTB-4 Bronze Bush is made with additional centrifugal molding process and 2 % Nickel is added.Dynamically balanced rotating parts to ensure minimum noise and vibration.Hydraulic parts are made with Investment Casting or Die-base molding process, which gives higher performance and higher efficiency.Individually and accurately balanced impeller gives better performance for lower power consumption.The pump shaft is made of stainless steel hardened and ground to close tolerance.Epoxy coated Rotor to protect stamping against corrosionThe entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

FeaturesMore durabilityHigh operating efficiencyInduction motors are easily re-windable using multi layer PVC insulated wire for better reliability.Compactly designed pump set for easy handling and installation.High-grade cast iron for a better life even in heavy and contaminated water.Front & Back side carbon bearing with Stainless Steel Thrust Plate.Electrically designed to lower power consumption and operating cost.Non-magnetic, corrosion-resistant high-grade stainless steel stator body.LTB-4 Bronze Bush is made with additional centrifugal molding process and 2 % Nickel is added.Electrical grade sheet stamping for lower power consumption and higher product life.Dynamically Balancing Rotating part to ensure minimum noise and vibrating free operationIndividually and accurately balanced impeller gives better performance for lower power consumption.Non-overloading power characteristic for safety of motor.Replaceable wearing parts.Highly durable water cooled rewindable motor.

FeaturesThe motor body is made from extruded aluminum and cast iron for better heat dissipation.Capacitor starts and runs motor with IP 44 protection.Pre-lubricated double-shielded ball bearings for a longer life.High quality carbon-ceramic mechanical seal for a longer life.The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration.Protective Enclosure Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture.Pump can operate in wide voltage range.