M. Trading

Asansol, West Bengal

Bosch GDB 180 WE Professional The compact powerhouse for drilling holes of up to 180 mm in concrete

• 1 Powerful 2000 watt motor for breakthroughs in reinforced concrete up to 180 mm
• 2 Long lifetime due to robust design and gearbox with oil-bath lubrication
• 3 Wet and dry application; both hand-held and stand-mounted

Why this tool?

• Low weight of only 5.2 kg for low user fatigue
• Ideal in a system with GCR 180 drill stand (part number 0 601 190 100)

18V X2 (36V) LXT Li-Ion Cordless 26 mm (1") Combination Hammer, SDS-PLUS Bits

• 18V solution for corded power demands
• Two 18V LXT Li-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform
• Makita-built motor delivers 0-1, 250 RPM, 0-5, 000 BPM and 3.0 Joules (Makita value) of impact energy for faster drilling
• Vibration absorbing handle provides a sure and comfortable operation
• Ergonomic soft grip handle and large 2-finger trigger provide increased comfort on the job
• LED battery indicators show charge level for each battery
• 3-Mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"
• SDS-PLUS shank rotates 360° with 40 different positions
• One touch sliding chuck enables quick and easy bit changes
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• Compact and ergonomic design at only 350 mm long
• Lightweight for reduced operator fatigue
• LED light illuminates drilling surface for more productivity in low light applications
• Extreme Protection Technology (XPT) engineered to provide increased dust and water resistance in harsh job site conditions
• Reverse switch operable by one hand
• Optional dust cup for a cleaner work environment
• Battery protection circuit protects against overloading, over-discharging and over-heating
• Externally accessible brushes for easy serviceability
• Depth gauge for increased drilling consistency (country-specific)

Standard Accessories : Side Handle, Depth Gauge, Dust Cup (country-specific), Cleaning cloth (country-specific), Bit Grease (country-specific), Without Battery & Charger

Details :

• 7.2V Li-Ion Cordless Two-Position 5 mm (3/16") 5 N·m (44 in.lbs.) Driver Drill
• Auto-stop clutch: tool shuts off when clutch disengages for extra fastening control; prevents overdriving the fastener
• Built-in LED light illuminates the work area via a separate switch and acts as a low battery indicator
• Ultra-lightweight and compact tool
• 21 clutch settings and drill mode for added fastening control
• 2-speed design (200 RPM and 650 RPM) for high or low torque applications
• Comfortable grip design operates in straight or pistol grip positions
• Can be also used as a hand driver
• Soft grip handle provides increased comfort on the job
• Delivers 5.0 N·m (44 in.lbs.) of Max Torque in a compact design
• Convenient 6.35 mm (1/4") hex chuck for quick bit changes
• Electric brake for maximum productivity and increased operator safety

Standard Accessories : Charger, 2 Batteries, Bit Set

Details :

• 6.5 mm (1/4") 370 W High Speed Variable Speed Reversing Drill with Keyed Chuck
• Designed For High Drilling Efficiency
• With 4, 200 RPM high speed rotation, ideal for fast drilling of small holes
• Compact, yet with high power
• Forward/Reverse switch for easy switching between operating modes
• Variable speed dial enables operator to adjust drilling speed based on materials or application
• Ergonomic soft rubber grip design for vibration absorption and comfortable operation
• In-line positive grip design maximises power thrust
• 6.5 mm (1/4") drill chuck engineered for positive bit retention
• Depth gauge for increased drilling consistency

• Double insulated

Standard Accessories : Depth Gauge

13 mm (1/2") 720 W Variable 2-Speed Reversing Drill with Keyed Chuck

• High speed and high efficiency
• Powerful 720 W motor
• Aluminum gear housing provides high quality and toughness
• Extra-rigid cylindrical housing
• 2-speed gear selection with variable speed in each range for a wide range of applications
• Ergonomically designed handle with rubberized soft grip
• Built-in torque limiter helps prevent kickback.
• Forward/Reverse switch for easy switching between operating modes
• Depth gauge for increased drilling consistency
• Double insulated for operator safety

Standard Accessories : Depth Gauge, Side Grip, Chuck Key

13 mm (1/2") 1, 050 W Angle Drill with Keyed Chuck

• Sidewinder handle rotates 90° left or right.

• Powerful 1, 050W motor for improved performance
• 2-Speed (300 & 1, 200 RPM) for increased drilling versatility
• Built-in clutch reduces gear damage by automatically disengaging gears if the bit binds (low speed only).
• Adjustable top handle with hex wrench storage for easy positioning
• Ergonomically designed rubberized grip for reduced operator fatigue
• Compact design for use when working between framing studs and other close quarter applications
• Strong supporting side handle with hex wrench storage
• Tool case fits tool even with attached bit.
• Ideal for frames, plumbers, electricians and general construction
• Double insulated

Standard Accessories : Chuck Key, Hex Wrench, Side Grip

132 mm (5-3/16") 1, 700 W Diamond Core Drill, Wet & Dry

• Heavy duty wet diamond core drill with powerful 1, 700W motor for shock-free and accurate drilling into concrete and natural stone
• Electronic torque limitation and speed control for a constant speed even under load
• Soft start suppresses start-up reaction for more control and better accuracy.
• Double insulated for operator safet