GST : 27AKSPC0896N1ZF
Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Pipe Tee.
An ISO 9001:2008 Certified Company, Maha Bhairav Stainless Steel is one of the leading manufacturer & exporters of Stainless Steel Tee, Pipe Elbow, Pipe Tee, Pipe Cross, Pipe Reducer, Pipe End Cap, Pipe Bends, Stubend Lap Joint, Pipe Nipples, Pipe Outlet Fittings. We specialise in the manufacture of special size and custom shape pipe tee for our customers.We can manufacture Elbow upto 48 with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes.
We are higher quality Manufacturer ofPipe Fittings, Butt welded Fittings, A403 Gr WP304, A403 Gr WP 304L, A403 Gr WP316, A403 Gr WP316L, A403 Gr WP316Ti, A403 Gr WP321, A403 Gr WP321H, A403 Gr WP347, A403 Gr WP347H, A403 Gr WP317, A403 Gr WP 317L, A420 Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Pipe Fittings, ASTM A234 Fittings, A234 Alloy Steel Pipe Fittings, Alloy Steel Buttweld Fittingswith relevant test certificates of raw materials and finished products.
Type of TeeType A Tee, Decreased pressure factor
Same wall thickness on the weld ends and on the fi tting body as for a pipe with the same specifi ed wall thickness. Their resistance to internal pressure is less than that of a pipe with the same diameter, same wall thickness and made of the same grade of steel.
The required calculation methods are based on the calculation standards defined in EN 13480-3
Type B Tee, Full pressure factor
Increased wall thicknesses on the fitting body, same resistance to internal pressure as for a pipe with the same diameter, same wall thickness and made of the same grade of steel.
The required calculation methods are based on the calculation standards defined in EN 13480-3
Tee MarkingEach fitting must be permanently marked.
Marking through hard stamping.
EN 10253-2 Fittings & Tee are delivered with or without surface protection at the discretion of the manufacturer.
EN 10253-4 Fittings &Tee are delivered by the manufacturer in normal packaging, without surface protection, and without end protectors (caps). Special packaging, protective coverings, and end protectors (caps) can be agreed.
| Type | Butt weld (BW) |
| Butt weld (BW) Standard |
ASME / ANSI – B 16.9ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’ API 590-605 ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings’ ASME B16.25 – ‘Buttwelding Ends’ ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’ MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’ |
| Butt Weld Equal Tee Dimension | ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313 |
| Butt Weld Equal Tee Size | 1/2” TO 36”, (Seamless Butt weld up to 24”), (Welded Butt weld 8” TO 36”) |
| Butt Weld Equal Tee Thickness | SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness. |
| Butt weld fittings Range | Elbow, Tee, Reducer, Stubend, Cross, Pipe Cap, Pipe Bend |
| Stainless Steel Butt Weld Equal Tee |
ASTM A403 WP316/316LASTM A403 WP304/304L ASTM A182 F316L, 304L DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Duplex Steel Butt Weld Equal Tee |
ASTM A815, ASME SA815 UNS No S31803, S32205ASTM A815, ASME SA815 UNS No S32750, S32950 |
| Carbon Steel Butt Weld Equal Tee |
ASTM A234 Gr. WPBASTM A420 Gr. WPL6 ASTM A105 ASTM A350 Gr. LF2 ASTM A234 Gr WPB ST37.2, ST35 ASTM / ASME A/SA 234 / 420 WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70 |
| Low Temperature Butt Weld Equal Tee | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel Butt Weld Equal Tee |
ASTM A 234 WP – P5, P9, P11, P12, P21, P22 & P91ASTM A234 wp1 / wp5 / wp9 / wp11 / wp22 / wp91 |
Mr. Akshay Chopra (Maha Bhairav Stainless)
12/22,20 GRD Floor,Bhabha Chawl,Khetawadi 13Th Lane,Greater Mumbai MCOR, Charni Road, Mumbai - 400004, Khetwadi, Maharashtra, India
Share us via
