Post Buy Requirement
Sara Agro International
Karnal, Haryana, India
Verified Add Review

Other Products / Services

Rotary Tiller Spares

  • TRACTOR POWER 40-45
  • TILLAGE WIDTH 150 cm
  • OVERALL WIDTH 180 cm
Suitable for use in dry as well as wet land cultivation.Suitable for light and medium soil conditions.Used for loosening and aerating soil up to a depth of Eight inches.Prepares seed beds quickly and economically.Single speed gear box with 3 point linage, compatible with 540 PTO RPM.Available in both gear driven and chain driven. (iv) Type of blade- L type.
View Complete Details

Tractor Trailer

We are the manufacturer of high quality Tractor Trailer. Our Tractor Trailer are synonymous to durabilities, high strength, better performance and cost effectiveness.

View Complete Details

Cultivator/Tiller Springs

The material used for manufacture of springs is as per BIS:4454 Part-1 Gr.2. For the procurement of raw material High Carbon Spring Steel Wire. which is the only reliable product availability source in India for the manufacture of all above type of springs. And for locally drawn commercial quality springs, we procure High Carbon Wire Rod However, both the Spring products i.e. from OE supplied wire and locally drawn wire rod are manufactured over altogether different units located at different locations, just to avoid mixing of the product. Moreover, for the satisfaction of customers and for the sake of guarantee, the springs manufactured from wire are stamped duly engraved on the hook as shown in the picture.




Harrow Springs & Disc Plough Springs


These springs are manufactured from above wire sizes, as per customers specification & requirement with regard to spring length & outer diameter.



Technical Information


There is lot more to spring design and manufacture than most people think. From choosing the correct material with a suitable balance between strength and reliability to choosing the correct surface finish and corrosion protection, the options are endless.


At our end, we keep sufficient range of materials in stock ready for immediate use. We have got the specialization in High Carbon Steel springs.



Wire Shapes


Our range of wire shapes covers an infinite range of shapes and sizes for use in Agricultural Implements. The easiest way to find out if we can help with your idea or design is to send an enquiry, e-mail or give us a call.


We will need to know some or all of the following to determine, if we are able to help:


Size of the wire to be used : Depending on the complexity of the design we can.


Usually use any size of wire up to about 10 mm diameter in routine and 11 mm wire on specific demand.


Type of Wire : We stock and are able to use standard spring steels and High Carbon Steel Spring wire. For details on material types see our technical information section here.


Depending on the material used, you may require some form of corrosion protection. See the technical information section for more details.


Obviously, because each and every problem we encounter is different. Hence, it is difficult to state the price. The cost will depend on the complexity of the design and the type and size of the spring.



Chemical Composition %
C 0.71/0.75  
Mn 0.80 Max  
Si 0.15/0.35  
P 0.04 Max  
S 0.04 Max  
Cu 0.15 Max  
Physical Testing
Wire Size 9.20 mm 9.18 to 9.22
  9.50 mm 9.48 to 9.52
  10 mm 9.98 to 10.02
     
U.T.S. Kg/mm2 122-145
Reduction in Area % 30.0
View Complete Details

Rotary Tiller

The range of Rotary Tiller, we offer, is suitable to be used in dry and wet land cultivation with light and medium soil conditions. The company is known as one of the prominent Rotary Tiller Manufacturers and Suppliers, based in India. The Rotary Tiller, we offer, can be availed at the market leading prices.

Used For

  • Loosening and aerating soil up to a depth of 8 inches
  • Preparation of seed beds quickly and economically


Description

  • Type of blade : L type
  • Easy depth adjustment
  • Compatible with 540 PTO RPM
  • Single speed gear box with 3 point linage
  • Available in both gear driven and chain driven


Rotavator Blades

  • Directly imported from Italy
  • Long working hours
  • Excellent cutting edge
  • 100% boron tested steel
  • Minimum load on rotary tillers machines

Specifications

Type FK 150 FK 175 FK 200
Tractor Power 40-45 45-55 55-65
Overall Width 180 cm 205 cm 230 cm
Tillage Width 150 cm 175 cm 200 cm
Gearbox Single Bolt Single Bolt Single Bolt
P.T.O. Speed (R.P.M) 540 540 540
Rotor Speed 210 210 210
Gear Box Overload Protection Shear Bolt Shear Bolt Shear Bolt
Mounting Height 117 cm 117 cm 117 cm
No. of Flanges 6 7 8
No. of Blades 36 42 48
Total Wt. 360Kg.(Approx.) 395Kg.(Approx.) 435Kg.(Approx.)
Note : The weight and working data contained in the present leaflet are supplied for information only and are not binding.
View Complete Details

Cultivator Sweep

We are renowned as one of the famous Cultivator Sweep Manufacturers and Suppliers, based in India. The Cultivator Sweep, we provide, is fabricated and tested as per the set industrial quality standards. Our Cultivator Sweep is high in performance, long lasting in nature, and excellent in corrosion resistance.

View Complete Details

Cultivator Shovel

The company is counted amidst the prominent Cultivator Shovel Manufacturers and Suppliers, based in India. The Cultivator Shovel, we offer, is acclaimed for its superb quality and long lasting performance. Our Cultivator Shovel can be availed in bulk quantity at very competitive prices.

View Complete Details

Disc Blades

Offering outstanding performance with longer working life, our range of Disc Blades is high in demand in the nationwide markets. We are renowned as one of the prominent Disc Blades Manufacturers and Suppliers, based in India. The Disc Blades, that we provide, are available at very affordable prices.

View Complete Details

Tractor Trailer Spare Parts

The company is known as one of the prominent Tractor Trailer Spare Parts Manufacturers and Suppliers, based in India. The comprehensive assortment of our Tractor Trailer Spare Parts comprises of Tractor Trailer Axle, Tractor Trailer Drawbar, Tractor Trailer Hitch Hook, Tractor Trailer hydraulic Jacks, Tractor Trailer Rim, and Tractor Trailer Slide. These Tractor Trailer Spare Parts are known for their efficient performance and durability.

View Complete Details

Cultivator Springs

The company is primarily engaged in the manufacturing and supplying of Cultivator Springs all across the country. The Cultivator Springs, that we offer, are known for their excellent strength and superb performance. Being corrosion resistant and durable in nature, our Cultivator Springs are high in demand in the markets.

View Complete Details

Tiller Parts

We manufacture Tiller Parts which find their application in agricultural sector. We offer Tiller Parts which are made of optimum quality material, adding sturdiness to their construction. Our Tiller Parts are in huge demand owing to the quality and good performance. Our Tiller Parts are cost-efficient.

Features
  • Sturdy construction
  • Easy to operate
  • Good performance
  • Durable
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sanjay Sharma (Sara Agro International)
  • Plot No. 4, Sector-16 Road, Khera Colony, Sector 16, Karnal, Haryana - 132001, India
  • Share us via
  • Call 08068051325 Ext. 739