Chrome Steel Balls Grinding Media for your Ball Mill

Polished to stunning elegance, MaheshwariChrome Steel Grinding Ballsare the Rolls Royce of the grinding ball industry.

A dynamic and reliable steel ball, the intelligent design of thisball mill mediais owed to our breakthrough technology, which enables us to take the finest chrome steel andvacuum-de-gasit. Because this process sets free all trapped air in the formulation, ourchrome ballsare produced with no air pocketswhich results in a fully solid metal ball. So, thechrome steel ballsin your ball mills grind your productnot each other.

Through hardened and rust resistant, the high density and superb hardness ofMaheshwariChrome Grinding Ballsmake thesegrinding media ballsideal for ball mill grinding, including the crushing, mixing, and dispersing of even the hardest raw materials and the most viscous liquids.

Maheshwari Steel Ballswill transform your ball mill operation into a lean, mean, grinding machine.

Material: AISI52100 / Suj-2 / 100Cr6 / Gcr15

Hardness: HRC 66-69

• Usage: precision bearings, precision parts, precision milling and grinding

Diameter: 0.5mm-100mm

Hardness: HRC 55-60

Material: AISI1010/1015/1045/1085 carbon steel.

Grade:G10- G1000

Application

1. General industry for automobile, motorcycle, bicycle
manufacturing, special bearings & micro ball for the electronics industry.
2. High accuracy & low noise motor bearing& household
appliance bearings
3. High - speed, low noise special bearing
4. Ball valves for liquid and gas etc.

ZIRCONIA BALLS: High whiteness and

Features:

1. High hardness.

2. High wear resistance. Alumina ceramic is the material of choice for alumina wear parts.

3.Good tenacity, impact-endurable, no break under high speed impact.

4.Higher density than any other grinding bead brings higher grinding efficiency, thus allowing higher solid proportion or increased material flow.

The main advantages of ZrO2 ceramic ball to steel balls are:1. It is 23% lighter than the steel ball, which reduces the centrifugal force, rolling and wear of the channel during high-speed and accelerated operation of the bearing;2. The friction coefficient is small and the rotation flexibility is good;3, high temperature resistance, the use temperature can reach 750 C, more resistant to chemical corrosion than steel;4, can work under the conditions of no oil lubrication; no metal pollution; no magnetic; electrical insulation.

Vickers hardness> 1200Bulk density 3.7g/cm3Inner dia.of orifice: 2mmSelf abrasion 2.0KN (2mm)Material: ZrO2(94.8%0.2%) Y2O3(5.20.2%)CharacteristicsGood stability, strong acid and alkali resistance.Has excellent toughness, compressive strength, etc., impact resistance, not broken.Low abrasion (ppm level), minimal wear on equipment, is the best grinding medium.The zirconium bead has good roundness, smooth surface, bright, high density, good strength, inertness, and hardness, and is aperfect and fine spherical grinding medium.Application areas: Inks, inks, coatings, pigments, fuels, glazes, papermaking, electronic materials, battery materials, siliconoxide, titanium dioxide, kaolin, calcium carbonate, chemical fiber catalysts, pharmaceuticals, biochemicals, cosmetics and other nanomaterials.Size:0.3-60mmSpecificationDensity> 6.05g/cm3Vickers hardness> 1200Bulk density 3.7g/cm3Inner dia.of orifice: 2mmSelf abrasion 2.0KN (2mm)Material: ZrO2(94.8%0.2%) Y2O3(5.20.2%)CharacteristicsGood stability, strong acid and alkali resistance.Has excellent toughness, compressive strength, etc., impact resistance, not broken.Low abrasion (ppm level), minimal wear on equipment, is the best grinding medium.The zirconium bead has good roundness, smooth surface, bright, high density, good strength, inertness, and hardness, and is aperfect and fine spherical grinding medium.Application areas: Inks, inks, coatings, pigments, fuels, glazes, papermaking, electronic materials, battery materials, siliconoxide, titanium dioxide, kaolin, calcium carbonate, chemical fiber catalysts, pharmaceuticals, biochemicals, cosmetics and other nanomaterials.

Ceramic beads made of aluminium-silicon oxide

Maheshwari A 99.3 aluminum oxide beads have a high degree of purity with an Al₂O₃content of > 99% and with secondary components of < 0.7%. These beads are ideal for use in agitator bead mills and in the wet grinding of aluminum oxide raw materials, e.g. for technical components, coatings and for high-quality paints and inks. The advantage is the availability of beads down to 0.5mm-60mm.

Technical Data: High purity 99.3 % Al2O3

Specific Weight 3.8 kg/dm3

Bulk Density 2.3 kg/dm3

Roundness 0.93 (ratio width/length (xmin/xmax))

Colour: White

Fields of application

In themining industryA 99.3 ceramic beads are used for the grinding of minerals and precious metals.

Quality attributes

The ceramic beads type A 99.3 have a dense sintered structure, a smooth surface, high roundness and high hardness.

Glass beads made of quartz glass (synthetic silica glass) to form a high-purity grinding bead.

Type Q glass beads made of high-purity synthetic silica glass are formed into beads and then sintered in a defined manner.

Fields of application

Use as ultra-pure beads for cell disintegration and autogenous grinding; grinding of conductive pastes, glass paints and high-purity silicate materials; in the laboratory as carrier material with bioactive or catalytic surface; as filler material in the cosmetics industry, semi-conductor industry and pharmaceutical industry; as radiation conductor in the UV range (disinfection); optical sphere/half sphere for UV sources/wave guides; photovoltaic sphere with transmission of 170 5, 000 nm; filter material for very high temperatures and many other applications.

Advantages

• Highest chemical purity with SiO₂content 99.98 %
• Highest chemical resistance of all glass types (hydrolytic class HGB 1, acid resistance class S1 and alkali resistance class A1)
• High light transparency from IR to UV wavelength range (170 5000 nm)
• High roundness of beads d_MIN/ d_MAX 0.95
• Very high service temperature of 1100 C (1300 C also possible for short periods)
• Very high thermal shock resistance

AISI 440C Stainless steel ball

Size:0.35mm- 50.8mm

Grade :G10-G200

Hardness:HRC56-58

Magnetic:Martensitic steel, magnetic

Features:high precision, good corrosion resistance, strong rust and wear resistance.

Applications:Bearings, stamping / hydraulic parts, valves, aerospace, seals, refrigeration equipment, high-precision instruments, etc.

Ceria-stabilized Tetragonal Zirconia Polycristal (Ce-TZP) bead is made with state-of-the-art dropping and rolling method. The 20% cerium oxide rare earth contributes to the highest density of zirconium oxide series beads. The uniform gloss working surface results from consistent zirconia polycristal, which is the guarantee of lower bead and energy consumption. It is recommended to grind the high hardness and viscosity slurry in high energy density bead mills.

Micro-structure of delicate, uniform, dense ceramics of the Quartet, it has a gem-like hardness and density, is a series of grinding all the zirconium-mediated a most Shen. Its excellent wear resistance and fracture toughness is particularly suited for high-solid-phase high-viscosity, high hardness of the paste for grinding and dispersion of pure; good match at the same time high input energy and the high shear machine sanding.

Applications1, wear-resistant, corrosion-resistant products: paints, textiles, paints, printing and dyeing2, high strength, high toughness products: magnetic materials, piezoelectric ceramics, dielectric ceramics3, to prevent pollution: medicine, food, cosmetics4, Ceramics: Electronic ceramics, refractory ceramics, structural ceramics

Real Density:>6.0g/cm³

Bulk Density: 3.75g/cm3

The Maheshwari type ZC 6.1 made of zirconium oxide / cerium stabilized have very good wear resistance. Their longevity gives you grinding or dispersing beads at an attractive price and your product quality is guaranteed.

Fields of application

• for grinding / dispersing of lacquer and paint systems
• for grinding / dispersing organic and inorganic pigments
• for grinding / dispersing dyestuffs for dyeing textiles, plastics
• for grinding and preparation of electroceramics
• for the preparation of glazes
• for magnetic ceramics, ferrites
• for technical/mechanical components
• for dispersing fungicides, herbicides and insecticides
• for ultra-fine grinding down to the nanometer range
• for grinding minerals and precious metals

High Performance Steatite Ceramic Balls: Available in percentages of 92% and lower from 0.5mm-60mm. They are easier to use than cylinders and one of the most popular medias for ball milling. Technical Details Density: 3.60 gm/cc. Hardness: 7.5 Composition: Magnesium and Silicate Color: off White Shape: Spherical & Cylindrical Bulk Density: 2.20 kg/l; 4.90 #/l; 8.20 kg/gal; 18.00 #/gal

Chrome Steel Balls Grinding Media for your Ball Mill

Polished to stunning elegance, MaheshwariChrome Steel Grinding Ballsare the Rolls Royce of the grinding ball industry.

A dynamic and reliable steel ball, the intelligent design of thisball mill mediais owed to our breakthrough technology, which enables us to take the finest chrome steel andvacuum-de-gasit. Because this process sets free all trapped air in the formulation, ourchrome ballsare produced with no air pocketswhich results in a fully solid metal ball. So, thechrome steel ballsin your ball mills grind your productnot each other.

Through hardened and rust resistant, the high density and superb hardness ofMaheshwariChrome Grinding Ballsmake thesegrinding media ballsideal for ball mill grinding, including the crushing, mixing, and dispersing of even the hardest raw materials and the most viscous liquids.

Maheshwari Steel Ballswill transform your ball mill operation into a lean, mean, grinding machine.

Material: AISI52100 / Suj-2 / 100Cr6 / Gcr15

Hardness: HRC 66-69

• Usage: precision bearings, precision parts, precision milling and grinding

Diameter: 0.5mm-100mm

Hardness: HRC 55-60

Material: AISI1010/1015/1045/1085 carbon steel.

Grade:G10- G1000

Application

1. General industry for automobile, motorcycle, bicycle
manufacturing, special bearings & micro ball for the electronics industry.
2. High accuracy & low noise motor bearing& household
appliance bearings
3. High - speed, low noise special bearing
4. Ball valves for liquid and gas etc.

ZIRCONIA BALLS: High whiteness and

Features:

1. High hardness.

2. High wear resistance. Alumina ceramic is the material of choice for alumina wear parts.

3.Good tenacity, impact-endurable, no break under high speed impact.

4.Higher density than any other grinding bead brings higher grinding efficiency, thus allowing higher solid proportion or increased material flow.

The main advantages of ZrO2 ceramic ball to steel balls are:1. It is 23% lighter than the steel ball, which reduces the centrifugal force, rolling and wear of the channel during high-speed and accelerated operation of the bearing;2. The friction coefficient is small and the rotation flexibility is good;3, high temperature resistance, the use temperature can reach 750 C, more resistant to chemical corrosion than steel;4, can work under the conditions of no oil lubrication; no metal pollution; no magnetic; electrical insulation.

Vickers hardness> 1200Bulk density 3.7g/cm3Inner dia.of orifice: 2mmSelf abrasion 2.0KN (2mm)Material: ZrO2(94.8%0.2%) Y2O3(5.20.2%)CharacteristicsGood stability, strong acid and alkali resistance.Has excellent toughness, compressive strength, etc., impact resistance, not broken.Low abrasion (ppm level), minimal wear on equipment, is the best grinding medium.The zirconium bead has good roundness, smooth surface, bright, high density, good strength, inertness, and hardness, and is aperfect and fine spherical grinding medium.Application areas: Inks, inks, coatings, pigments, fuels, glazes, papermaking, electronic materials, battery materials, siliconoxide, titanium dioxide, kaolin, calcium carbonate, chemical fiber catalysts, pharmaceuticals, biochemicals, cosmetics and other nanomaterials.Size:0.3-60mmSpecificationDensity> 6.05g/cm3Vickers hardness> 1200Bulk density 3.7g/cm3Inner dia.of orifice: 2mmSelf abrasion 2.0KN (2mm)Material: ZrO2(94.8%0.2%) Y2O3(5.20.2%)CharacteristicsGood stability, strong acid and alkali resistance.Has excellent toughness, compressive strength, etc., impact resistance, not broken.Low abrasion (ppm level), minimal wear on equipment, is the best grinding medium.The zirconium bead has good roundness, smooth surface, bright, high density, good strength, inertness, and hardness, and is aperfect and fine spherical grinding medium.Application areas: Inks, inks, coatings, pigments, fuels, glazes, papermaking, electronic materials, battery materials, siliconoxide, titanium dioxide, kaolin, calcium carbonate, chemical fiber catalysts, pharmaceuticals, biochemicals, cosmetics and other nanomaterials.

Ceramic beads made of aluminium-silicon oxide

Maheshwari A 99.3 aluminum oxide beads have a high degree of purity with an Al₂O₃content of > 99% and with secondary components of < 0.7%. These beads are ideal for use in agitator bead mills and in the wet grinding of aluminum oxide raw materials, e.g. for technical components, coatings and for high-quality paints and inks. The advantage is the availability of beads down to 0.5mm-60mm.

Technical Data: High purity 99.3 % Al2O3

Specific Weight 3.8 kg/dm3

Bulk Density 2.3 kg/dm3

Roundness 0.93 (ratio width/length (xmin/xmax))

Colour: White

Fields of application

In themining industryA 99.3 ceramic beads are used for the grinding of minerals and precious metals.

Quality attributes

The ceramic beads type A 99.3 have a dense sintered structure, a smooth surface, high roundness and high hardness.

Glass beads made of quartz glass (synthetic silica glass) to form a high-purity grinding bead.

Type Q glass beads made of high-purity synthetic silica glass are formed into beads and then sintered in a defined manner.

Fields of application

Use as ultra-pure beads for cell disintegration and autogenous grinding; grinding of conductive pastes, glass paints and high-purity silicate materials; in the laboratory as carrier material with bioactive or catalytic surface; as filler material in the cosmetics industry, semi-conductor industry and pharmaceutical industry; as radiation conductor in the UV range (disinfection); optical sphere/half sphere for UV sources/wave guides; photovoltaic sphere with transmission of 170 5, 000 nm; filter material for very high temperatures and many other applications.

Advantages

• Highest chemical purity with SiO₂content 99.98 %
• Highest chemical resistance of all glass types (hydrolytic class HGB 1, acid resistance class S1 and alkali resistance class A1)
• High light transparency from IR to UV wavelength range (170 5000 nm)
• High roundness of beads d_MIN/ d_MAX 0.95
• Very high service temperature of 1100 C (1300 C also possible for short periods)
• Very high thermal shock resistance

AISI 440C Stainless steel ball

Size:0.35mm- 50.8mm

Grade :G10-G200

Hardness:HRC56-58

Magnetic:Martensitic steel, magnetic

Features:high precision, good corrosion resistance, strong rust and wear resistance.

Applications:Bearings, stamping / hydraulic parts, valves, aerospace, seals, refrigeration equipment, high-precision instruments, etc.

Ceria-stabilized Tetragonal Zirconia Polycristal (Ce-TZP) bead is made with state-of-the-art dropping and rolling method. The 20% cerium oxide rare earth contributes to the highest density of zirconium oxide series beads. The uniform gloss working surface results from consistent zirconia polycristal, which is the guarantee of lower bead and energy consumption. It is recommended to grind the high hardness and viscosity slurry in high energy density bead mills.

Micro-structure of delicate, uniform, dense ceramics of the Quartet, it has a gem-like hardness and density, is a series of grinding all the zirconium-mediated a most Shen. Its excellent wear resistance and fracture toughness is particularly suited for high-solid-phase high-viscosity, high hardness of the paste for grinding and dispersion of pure; good match at the same time high input energy and the high shear machine sanding.

Applications1, wear-resistant, corrosion-resistant products: paints, textiles, paints, printing and dyeing2, high strength, high toughness products: magnetic materials, piezoelectric ceramics, dielectric ceramics3, to prevent pollution: medicine, food, cosmetics4, Ceramics: Electronic ceramics, refractory ceramics, structural ceramics

Real Density:>6.0g/cm³

Bulk Density: 3.75g/cm3

The Maheshwari type ZC 6.1 made of zirconium oxide / cerium stabilized have very good wear resistance. Their longevity gives you grinding or dispersing beads at an attractive price and your product quality is guaranteed.

Fields of application

• for grinding / dispersing of lacquer and paint systems
• for grinding / dispersing organic and inorganic pigments
• for grinding / dispersing dyestuffs for dyeing textiles, plastics
• for grinding and preparation of electroceramics
• for the preparation of glazes
• for magnetic ceramics, ferrites
• for technical/mechanical components
• for dispersing fungicides, herbicides and insecticides
• for ultra-fine grinding down to the nanometer range
• for grinding minerals and precious metals

High Performance Steatite Ceramic Balls: Available in percentages of 92% and lower from 0.5mm-60mm. They are easier to use than cylinders and one of the most popular medias for ball milling. Technical Details Density: 3.60 gm/cc. Hardness: 7.5 Composition: Magnesium and Silicate Color: off White Shape: Spherical & Cylindrical Bulk Density: 2.20 kg/l; 4.90 #/l; 8.20 kg/gal; 18.00 #/gal