Mumbai, Maharashtra, India
GST : 27AAGFM0363G1ZG
Verified
Add Review
Our Products
Rockstar 500 is a wear resistant quenched and tempered steel plate having an excellent combination of hardness, formability and weldability to meet fabrication requirements.
Product Application
Rockstar 500 is used for application where the components are subjected to wear. It is a popular abrasion-resistant product for mining and other highly abrasive industrial applications.
Dimensions
| Thickness | Width |
|---|---|
| 6 – 50 mm | Up to 3500mm;higher width can be provided on a case to case basis |
| Delivery Condition | Quenched/Quenched and tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges can also be delivered after agreement. Plates can be delivered in Shot blasted and primer coated surface condition. |
Chemical Composition (Ladle Analysis)
| Plate Thickness mm |
C Max % |
Mn Max % |
P Max % |
S Max % |
Si Max % |
Cr Max % |
Ni Max % |
Mo Max % |
B Max % |
CE Max |
PCM Max |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.0 – 20.0 | 0.60 | 0.41 | |||||||||
| 21.0 – 40.0 | 0.30 | 1.60 | 0.025 | 0.010 | 0.70 | 1.50 | 1.50 | 0.70 | 0.0040 | 0.65 | 0.43 |
| 41.0 – 50.0 | 0.74 | 0.48 |
Rockstar_500 Data Sheet
Rockstar 400 is a wear resistant quenched and tempered steel plate grade having an excellent combination of hardness, formability, weldability and toughness to meet requirement. It has designed with relatively low carbon equivalent for better weldability.
Product Application
Rockstar 400 is a cost effective abrasion resistant material used for fabrication of crushers, liners for truck beds, buckets, hoppers, chutes, excavators, and conveyor throughs, conrete mixer drums, trash truck bottoms, bucket lips, street sweepers and dump trailers and many more.
Dimensions
| Thickness | Width |
|---|---|
| 6 – 75 mm | Up to 3500mm;higher width can be provided on a case to case basis, depending on thickness |
| Delivery Condition | Quenched/Quenched and tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges can also be delivered after agreement. Plates can be delivered in Shot blasted and primer coated surface condition. |
Chemical Composition (Ladle Analysis)
| Plate Thickness mm |
C Max % |
Mn Max % |
P Max % |
S Max % |
Si Max % |
Cr Max % |
Ni Max % |
Mo Max % |
B Max % |
CE Max |
PCM Max |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.0 – 20.0 | 0.16 | 1.6 | 0.025 | 0.010 | 0.70 | 0.50 | 0.25 | 0.25 | 0.0040 | 0.45 | 0.28 |
| 21.0 – 32.0 | 0.18 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.25 | 0.25 | 0.0040 | 0.48 | 0.29 |
| 32.1 – 50.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.57 | 0.33 |
| 50.1 – 75.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.65 | 0.40 |
Rockstar_400 Data Sheet
We are the renowned Importer and Supplier of Stainless Steel Pipe Fittings. We provide different kinds of Stainless Steel Pipe Fittings. We offer the Stainless Steel Pipe Fittings as per the customer design and specification. The Stainless Steel Pipe Fittings are available in both regular and special grades and sizes. The Stainless Steel Pipe Fittings we provide include Stainless Steel Pipe Bend, Stainless Steel Pipe Elbow, Stainless Steel Pipe Stub End, Stainless Steel Pipe Cap and Stainless Steel Pipe Reducer.
Type : Elbow, Tee, Union, Cap, Coup-bushing, Plug, Nipple, Hexagon Nipple, Bareel Nipple, Hose Nipple, Bend, Reducers, Coupling, Coller, Stubend & Ferrul Fitting Etc.
Grade : 304, 304l, 316, 316l, 316ti, 308, 309, 310, 310s, 317l, 321, 347, 409, 410, 420, 430/446/904l /220 (duplex)Nickel, Monel, Inconel, Hastalloy, Etc.
We are the trusted Importer and Supplier of Stainless Steel Wire & Rod. The Stainless Steel Wire & Rod have high tensile strength and are corrosion resistant. The Stainless Steel Wire & Rod we offer are made with versatile technology and according to the set industrial quality standards. The Stainless Steel Wire & Rod have long service life and are processed well.
Specifications
Formula of Caculating Weight
Weight of SS Square Bar
Weight of Hexagonal Bar
Manibhadra Metal & Tubes is a prominent Importer & Supplier of Stainless Steel Pipe & Tubes. We offer Stainless Steel Pipe & Tubes in a variety of grades, types, standards etc.
Grade : 304, 304L, 316, 316L, 316TI, 308, 309, 310, 310S, 317L, 321, 347, 409, 410, 420, 430/446/904L/2205(duplex) Nickel, Monel, Inconel, Hastalloy etc.
Details
| Size of Pipes & Tubes | Dimension Ansi B 36-10 | ||||||||||||||||||||||||||||||
| Nominal Thickness and Weight | |||||||||||||||||||||||||||||||
| Number of schedule | |||||||||||||||||||||||||||||||
| 5S | 10S | 10 | 20 | 30 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | Standard | Extra Strong | Double Extra Strong | |||||||||||||||||
| Nominal in Inch | Outside In mm | mm | kg/mm | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/ml | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | mm | kg/m | ||
| 1/8" | 10.3 | - | - | 1.28 | 0.28 | - | - | 1.60 | 0.345 | - | - | 1.73 | 0.36 | - | - | 2.41 | 0.46 | - | - | - | - | - | - | - | - | 1.73 | 0.36 | 2.41 | 0.46 | - | - |
| 1/4" | 13.7 | - | - | 1.65 | 0.49 | - | - | 2.00 | 0.580 | - | - | 2.24 | 0.63 | - | - | 3.02 | 0.80 | - | - | - | - | - | - | - | - | 2.24 | 0.63 | 3.02 | 0.80 | - | - |
| 3/8" | 17.1 | - | - | 1.65 | 0.63 | - | - | 2.00 | 0.750 | - | - | 2.31 | 0.85 | - | - | 3.20 | 1.10 | - | - | - | - | - | - | - | - | 2.31 | 0.85 | 3.20 | 1.10 | - | - |
| 1/2' | 213 | 165 | 0.81 | 2.11! | 1.00 | - | - | 2.00 | 0.957 | - | - | 2.771.26 | 1.26 | - | - | 3.73 | 1.62 | - | - | - | - | - | - | 4.78 | 1.95 | 2.77 | 1.26 | 3.73 | 1.62 | 7.47 | 2.54 |
| 3/4' | 26'.7 | 1.65 | 1.03 | 2.11 | 1.28 | - | - | 2.50 | 1.500 | - | - | 2.87 | 1.68 | - | - | 9.91 | 2.19 | - | - | - | - | - | - | 5.56 | 2.89 | 2.87 | 1.68 | 3.91 | 2.91 | 7.82 | 3.63 |
| 1" | 33.4 | 1.65 | 1.29 | 2.77 | 2.08 | - | - | 2.50 | 1.916 | - | - | 3.38 | 2.5 | - | - | 4.55 | 3.23 | - | - | - | - | - | - | 6.35 | 4.23 | 3.38 | 2.50 | 4.55 | 3.23 | 9.09 | 5.45 |
| 11/4 | 42.2 | 1.65 | 1.65 | 2.77 | 2.69 | - | - | 3.00 | 2.910 | - | - | 3.56 | 3.38 | - | - | 4.85 | 4.46 | - | - | - | - | - | - | 6.35 | 5.60 | 3.56 | 3.38 | 4.85 | 4.46 | 9.70 | 7.75 |
| 2" | 60.3 | 1.65 | 2.38 | 2.77 | 3.94 | - | - | 3.00 | 4.263 | - | - | 3.91 | 5.43 | - | - | 5.54 | 7.47 | - | - | - | - | - | - | 8.74 | 11.10 | 3.91 | 5.43 | 5.54 | 7.47 | 11.07 | 13.44 |
| 21/2" | 73.0 | 2.11 | 3.70 | 3.05 | 5.26 | - | - | 4.00 | 6.486 | - | - | 5.16 | 8.62 | - | - | 7.01 | 11.40 | - | - | - | - | - | - | 9.52 | 17.90 | 5.16 | 8.62 | 7.01 | 11.40 | 14.02 | 20.29 |
| 3" | 88.9 | 2.11 | 4.50 | 3.05 | 6.45 | - | - | 4.00 | 8.423 | - | - | 5.49 | 11.29 | - | - | 7.62 | 15.25 | - | - | - | - | - | - | 11.13 | 21.30 | 5.49 | 11.28 | 7.62 | 15.25 | 15.25 | 27.65 |
| 31/2" | 101.6 | 2.11 | 5.20 | 3.05 | 7.40 | - | - | 4.50 | 10.838 | - | - | 5.74 | 13.56 | - | - | 8.08 | 18.62 | - | - | - | - | - | - | - | - | 5.74 | 13.56 | 8.08 | 18.60 | - | - |
| 4" | 114.3 | 2.11 | 5.81 | 3.05 | 8.34 | - | - | 4.50 | 12.555 | - | - | 6.02 | 16.06 | - | - | 8.56 | 22.29 | - | - | 11.13 | 28.25 | - | - | 13.49 | 33.51 | 6.02 | 16.06 | 8.56 | 22.29 | 17.12 | 17.12 |
| 5" | 141.3 | 2.77 | 9.45 | 3.40 | 11.56 | - | - | 5.00 | 16.900 | - | - | 6.55 | 21.76 | - | - | 9.52 | 30.92 | - | - | 12.70 | 40.24 | - | - | 15.88 | 49.05 | 6.55 | 21.76 | 9.52 | 30.92 | 19.05 | 57.37 |
| 6" | 168.3 | 2.77 | 11.31 | 3.40 | 13.82 | - | - | 6.35 | 24.150 | - | - | 7.11 | 28.23 | - | - | 10.97 | 42.52 | - | - | 14.27 | 54.20 | - | - | 18.26 | 67.47 | 7.11 | 28.23 | 10.57 | 42.52 | 2.95 | 79.11 |
| 8" | 219.1 | 2.77 | 14.78 | 3.76 | 19.94 | - | - | 6.35 | 33.28 | 7.04 | 36.76 | 8.18 | 42.49 | 10.31 | 53.07 | 1270 | 64.97 | 15.09 | 75.79 | 18.26 | 90.32 | 20.62 | 100.89 | 23.01 | 111.18 | 8.18 | 42.49 | 12.70 | 64.57 | 22.22 | 107.78 |
| 10" | 273.0 | 3.40 | 22.62 | 4.19 | 27.83 | - | - | 6.35 | 41.73 | 7.80 | 50.96 | 9.27 | 60.24 | 1270 | 81.46 | 14.27 | 108.97 | 19.05 | 157.94 | 2.83 | 194.64 | 27.79 | 224.36 | 31.75 | 253.32 | 25.71 | 281.49 | 9.52 | 81.21 | 12.70 | 107..28 |
| 12" | 323.9 | 3.96 | 33.00 | 4.57 | 36.00 | - | - | 6.35 | 49.68 | 8.38 | 65.14 | 10.31 | 79.71 | 14.27 | 108.97 | 17.48 | 131.71 | 21.44 | 159.67 | 25.40 | 186.75 | 28.58 | 207.87 | 33.32 | 238.60 | 9.52073.76 | 12.70 | 97.36 | 25.40 | 186.75 | - |
| 14" | 355.6 | 3.96 | 34.23 | 4.78 | 41.18 | 6.35 | 54.63 | 7.92 | 67.98 | 9.52 | 81.21 | 11.13 | 94.31 | 15.0 | 126.51 | 19.05 | 157.94 | 2.83 | 194.64 | 2.83 | 194.64 | 27.79 | 224.36 | 31.75 | 253.32 | 35.71 | 281.49 | 9.52 | 81.21 | 12.70 | 107.28 |
| 16" | 409.4 | 4.19 | 41.60 | 4.78 | 47.33 | 6.35 | 62.58 | 7.92 | 77.92 | 9.52 | 93.10 | 12.70 | 123.18 | 16.66 | 160.64 | 21.44 | 203.26 | 26.19 | 245.34 | 3096 | 286.33 | 36.53 | 332.72 | 40.49 | 365.94 | 9.52 | 93.13 | 12.72 | 40.49 | 364.94 | 9.52 |
| 18" | 457.2 | 4.19 | 46.83 | 4.78 | 5318 | 6.35 | 70.53 | 7392 | 87.58 | 11.13 | 12.12 | 1427 | 155.90 | 19.05 | 205.62 | 23.83 | 254.24 | 29.36 | 309.55 | 34.92 | 36.33 | 39.37 | 408.21 | 45.24 | 459.18 | 9.52 | 405.05 | 12.70 | 139.07 | - | - |
| 20" | 508.0 | 4.78 | 59.22 | 5.54 | 68.50 | 6.5 | 78.48 | 9.52 | 116.67 | 12.70 | 154.97 | 15.09 | 1383.14 | 20.62 | 247.79 | 26.19 | 310.91 | 32.54 | 381.20 | 28.10 | 441.06 | 44.45 | 507.63 | 507.63 | 50.01 | 564.24 | 9.52 | 116.97 | 12.70 | 154.97 | - |
| 22" | 558.8 | 4.78 | 63.75 | 5.54 | 73.81 | 6.35 | 68.42 | 9352 | 128.89 | 12.70 | 170.86 | - | - | 22.22 | 293.80 | 30.96 | 4441.30 | 68.89 | 546.84 | 46.02 | 639.18 | 52.37 | 716.16 | 59.54 | 806.74 | 9.52 | 140.81 | 12.71 | 0186.75 | - | - |
| 24" | 609.6 | 5.54 | 82.60 | 6.35 | 94.37 | 6.35 | 94.37 | 6.35 | 94.37 | 9.52 | 140.81 | 14.27 | 209.54 | 1.48 | 254.74 | 54.61 | 354.62 | 30.96 | 441.30 | 38.89 | 546.84 | 46.02 | 639.18 | 52337 | 716.16 | 59354 | 806.74 | 9.52 | 140.81 | 12.70 | 186.75 |
| 26" | 660.4 | - | - | - | - | 7.92 | 127.58 | 12.70 | 202.65 | - | - | - | - | - | - | 30.96 | 441.30 | 38.89 | 546.84 | 46.02 | 639.18 | 52.37 | 716.16 | 59.54 | 806.74 | 9.52 | 140.81 | 12.70 | 186.75 | - | - |
| 28" | 711.2 | - | - | - | - | 7.92 | 137.52 | 12.70 | 218.54 | 12.88 | 271.94 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 | 152.73 | 12.70 | 202.65 | - | - |
| 30" | 762.0 | - | - | - | - | 7.92 | 147.45 | 12.70 | 234.44 | 15.88 | 219.81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 | 152.73 | 164.65 | 12.70 | 218.54 | - |
| 32" | 812.8 | - | - | - | - | 7.92 | 127.38 | 12.70 | 250.33 | 15.88 | 311.67 | 17.48 | 42.17 | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 | 176.57 | 12.70 | 234.44 | - | - |
| 34" | 863.6 | - | - | - | - | 7.92 | 167.32 | 12.70 | 266.22 | 15.88 | 331.54 | 17.48 | 365.01 | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 | 188.50 | 12.70 | 250.33 | - | - |
| 36" | 914.4 | - | - | - | - | 7.92 | 177.26 | 12.70 | 282.12 | 15.88 | 351.41 | 19.05 | 420.21 | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 | 212.34 | 12.70 | 282.12 | - | - |
Pipe Dimension Chart
|
Nominal Bore |
Outside Diameter |
Sch-5S |
Sch-10S |
Sch-40S |
Sch-80S |
Sch-160S |
Sch-XXS |
|
||||||||
|
mm |
INCH |
mm |
Wt mm |
Weight (Kg/mt) |
Wt mm |
Weight (Kg/mt) |
Wt mm |
Weight (Kg/mt) |
Wt mm |
Weight (Kg/mt) |
Wt mm |
Weight (Kg/mt) |
Wt mm |
Weight (Kg/mt) |
||
|
3 |
1/8 |
10.3 |
1.24 |
0.276 |
1.24 |
0.28 |
1.73 |
0.37 |
2.41 |
0.47 |
- |
- |
- |
- |
||
|
6 |
1/4 |
13.7 |
1.24 |
0.390 |
1.65 |
0.49 |
2.24 |
0.631 |
3.02 |
0.80 |
- |
- |
- |
- |
||
|
10 |
3/8 |
17.1 |
1.24 |
0.490 |
1.65 |
0.63 |
2.31 |
0.845 |
3.20 |
1.10 |
- |
- |
- |
- |
||
|
15 |
1/2 |
21.3 |
1.65 |
0.800 |
2.11 |
1.00 |
2.77 |
1.27 |
3.75 |
1.62 |
4.75 |
1.94 |
7.47 |
2.55 |
||
|
20 |
3/4 |
26.7 |
1.65 |
1.03 |
2.11 |
1.28 |
2.87 |
1.68 |
3.91 |
2.20 |
5.54 |
2.89 |
7.82 |
3.63 |
||
|
25 |
1 |
33.4 |
1.65 |
1.30 |
2.77 |
2.09 |
3.38 |
2.50 |
4.55 |
3.24 |
6.35 |
4.24 |
9.09 |
5.45 |
||
|
32 |
1 1/4 |
42.2 |
1.65 |
1.65 |
2.77 |
2.70 |
3.56 |
3.38 |
4.85 |
4.47 |
6.35 |
5.61 |
9.70 |
7.77 |
||
|
40 |
1 1/2 |
48.3 |
1.65 |
1.91 |
2.77 |
3.11 |
3.68 |
4.05 |
5.08 |
5.41 |
7.14 |
7.25 |
10.16 |
9.54 |
||
|
50 |
2 |
60.3 |
1.65 |
2.40 |
2.77 |
3.93 |
3.91 |
5.44 |
5.54 |
7.48 |
8.74 |
11.1 |
11.07 |
13.44 |
||
|
65 |
2 1/2 |
73.0 |
2.11 |
3.69 |
3.05 |
5.26 |
5.16 |
8.63 |
7.01 |
11.4 |
9.53 |
14.9 |
14.2 |
20.39 |
||
|
80 |
3 |
88.9 |
2.11 |
4.51 |
3.05 |
6.45 |
5.49 |
11.30 |
7.62 |
15.2 |
11.1 |
21.3 |
15.24 |
27.65 |
||
|
100 |
4 |
114.3 |
2.11 |
5.84 |
3.05 |
8.36 |
6.02 |
16.07 |
8.56 |
22.3 |
13.49 |
33.54 |
17.12 |
41.03 |
||
|
125 |
5 |
141.3 |
2.77 |
9.47 |
3.40 |
11.57 |
6.55 |
21.8 |
9.53 |
31.97 |
15.88 |
49.11 |
19.05 |
57.43 |
||
|
150 |
6 |
168.3 |
2.77 |
11.32 |
3.40 |
13.84 |
7.11 |
28.3 |
10.97 |
42.7 |
18.2 |
67.56 |
21.95 |
79.22 |
||
|
200 |
8 |
219.1 |
2.77 |
14.79 |
3.76 |
19.96 |
8.18 |
42.6 |
12.7 |
64.6 |
23.0 |
111.2 |
22.23 |
107.8 |
||
|
250 |
10 |
273.1 |
3.40 |
22.63 |
4.19 |
27.78 |
9.27 |
60.5 |
12.7 |
96.0 |
28.6 |
172.4 |
25.40 |
155.15 |
||
|
300 |
12 |
323.9 |
3.96 |
31.25 |
4.57 |
36.00 |
9.52 |
73.88 |
12.7 |
132.0 |
33.32 |
238.76 |
25.40 |
186.97 |
||
|
350 |
14 |
355.6 |
3.96 |
34.36 |
4.78 |
41.3 |
11.13 |
94.59 |
19.05 |
158.08 |
35.71 |
281.70 |
- |
- |
||
|
400 |
16 |
406.4 |
4.19 |
41.56 |
4.78 |
47.29 |
12.7 |
123.30 |
21.41 |
203.33 |
40.46 |
365.11 |
- |
- |
||
|
450 |
18 |
457.2 |
4.19 |
46.80 |
4.78 |
53.42 |
14.27 |
155.80 |
23.8 |
254.36 |
45.71 |
466.40 |
- |
- |
||
|
500 |
20 |
508.0 |
4.78 |
59.25 |
5.54 |
68.71 |
15.09 |
183.42 |
26.19 |
311.2 |
49.99 |
564.68 |
- |
- |
||
|
600 |
24 |
609.6 |
5.54 |
82.47 |
6.35 |
94.45 |
17.48 |
255.41 |
30.96 |
442.08 |
59.54 |
808.22 |
- |
- |
||
Weight & Thickness Of S.s Guage Pipes
|
DIMENSION |
10 SWG (3.2 MM) |
12 SWG (2.6 MM) |
14 SWG (2.1 MM) |
16 SWG (1.65 MM) |
18 SWG (1.2 MM) |
19 SWG (1.0 MM) |
|
|||
|
Size |
OD |
Weight/MTR |
Weight/MTR |
Weight/MTR |
Weight/MTR |
Weight/MTR |
Weight/MTR |
|||
|
1/2" |
12.7 |
0.754 |
0.651 |
0.552 |
0.452 |
0.342 |
0.290 |
|||
|
5/8" |
15.875 |
1.006 |
0.856 |
0.718 |
0.582 |
0.437 |
0.369 |
|||
|
3/4" |
19.05 |
1.258 |
1.061 |
0.883 |
0.712 |
0.531 |
0.448 |
|||
|
1" |
25.4 |
1.762 |
1.470 |
1.214 |
0.972 |
0.720 |
0.605 |
|||
|
1 1/4" |
31.75 |
2.266 |
1.880 |
1.544 |
1.232 |
0.909 |
0.763 |
|||
|
1 1/2" |
38.1 |
2.770 |
2.289 |
1.875 |
1.492 |
1.098 |
0.920 |
|||
|
2" |
50.8 |
3.778 |
3.108 |
2.537 |
2.012 |
1.476 |
1.235 |
|||
|
2 1/2" |
63.5 |
4.786 |
3.928 |
3.198 |
2.531 |
1.854 |
1.550 |
|||
|
3" |
76.2 |
5.794 |
4.747 |
3.860 |
3.051 |
2.232 |
1.865 |
|||
|
3 1/2" |
88.9 |
6.802 |
5.566 |
4.521 |
3.571 |
2.610 |
2.180 |
|||
|
4" |
101.6 |
7.810 |
6.385 |
5.183 |
4.091 |
2.988 |
2.495 |
|||
ASTM Specification & Tolerance For Tubing & Piping
| Specification | Allowable Outside Variation in mm | Diameter | Allowable Wall Thickness Variation | Exact Length Tolerance in mm | Testing | |||||
|---|---|---|---|---|---|---|---|---|---|---|
ASTM-A213 Seamless Boiler Superheater and Heat Exchanger Tubes |
Nominal Diameter Under 25.4 25.4-38.1 incl 38.1-50.8 excl 50.8-63.5 excl 63.5-76.2 excl 76.2-101.6 incl |
Over .1016 .1524 .2032 .254 .3048 .381 |
Under .1016 .1524 .2032 .254 .3048 .381 |
%Over +20 +22 +22 +22 +22 +22 |
%Under -0 -0 -0 -0 -0 -0 |
Over 3.175 3.175 3.176 4.46 4.76 4.76 |
Under 0 0 0 0 0 0 |
Flattening Test Tension Test Flare Test Hardness Test 100% Hydrostatic test Refer to ASTM A-450 |
||
| Under 25.4 | 0.1016 | 0.1016 | 10 | -10 | 3.175 | 0 | ||||
| ASTM-A249 | 25.4-38.1 incl | 0.1524 | 0.1524 | 10 | -10 | 3.175 | 0 | Tension Test | ||
| Welded Boiler | 38.1-50.8 Excl | 0.2032 | 0.2032 | 10 | -10 | 3.175 | 0 | Flattening Test | ||
| Superheater, Heat | 50.0-63.5 excl | 0.254 | 0.254 | 10 | -10 | 4.762 | 0 | Flange Test | ||
| Exchanger And | 63.5-76.2 excl | 0.3848 | 0.3048 | 10 | -10 | 4.762 | 0 | Reverse Bend Test | ||
| Condenser Tubes | 76.2-101.6 incl | 0.381 | 0.381 | +10 -10 Minimum Wall tubes + 18% 0 available On request |
4.762 | 0 | Hardness Test 100% Hydrostastic Test Refer to ASTM A-450 |
|||
| Untp 12.7 | 0.13 | 0.13 | 15 | -15 | 3.2 | 0 | Flare Test (Seamless Only) | |||
| ASTM-A269 | 12.7-38.1 excl | 0.13 | 0.13 | 10 | -10 | 3.2 | 0 | Flange Test (Welded Only) | ||
| Seamless & Welded | 38.1-88.9 excl | 0.25 | 0.25 | 10 | -10 | 4.8 | 0 | Hardness Test | ||
| Tubing for General | 88.9-139.7 excl | 0.38 | 0.38 | 10 | -10 | 4.8 | 0 | Reverse Flattening Test | ||
| Service | 139.7-203.2 excl | 0.76 | 0.76 | 10 | -10 | 4.8 | 0 | (Welded only) | ||
| 100% Hydrostatic Test | ||||||||||
| Refer to ASTM-A269 | ||||||||||
ASTM-A270 |
25.4 38.1 50.8 |
.05 .05 .05 |
.20 .20 .28 |
+10.0 +10.0 +10.0 |
-10.0 -10.0 -10.0 |
3.2 3.2 3.2 |
0 0 0 |
Reverse flattening Test 100% Hydrostastic Test |
||
| Seamless & Welded | 60.5 | 0.05 | 0.28 | 10 | -10 | 3.2 | 0 | External’ polish on all tubes | ||
| Sanitary Tubing | 76.2 | 0.08 | 0.3 | 10 | -10 | 3.2 | 0 | Refer to ASTM A-270 | ||
| 101.6 | 0.08 | 0.38 | 10 | -10 | 4.8 | 0 | ||||
| 3.175-38.1 incl 38.1-1016 incl |
.4 .79 |
.79 .79 |
Minimum Wall 12.5% under | 6.4 6.4 |
0 0 |
Tension Test |
||||
| ASTM-A312 | 101.6-203.2 incl | 1.59 | 0.79 | nominal wall | 6.4 | 0 | Flattening Test | |||
| Seemless & Welded | Specified | 100% Hydrostatic Test | ||||||||
| pipe | (Normally Random | Refer to ASTM A-530 | ||||||||
| Lengths ordered) | ||||||||||
| ASTM A-358 Welded pipe |
219.08-750mm | 0.005 | -0.3 | 6 | Refer to ASTM A-530 | |||||
Manibhadra Metal & Tubes is one of the reputed Importers & Suppliers of Stainless Steel Flanges. We offer high quality Stainless Steel Flanges in different grades, types, sizes, and classes, as mentioned below :
Specifications
ASA 150 CLASS
| Nominal Pipe Size | Flange Dia O |
Dia of Bolt Circle A |
Dia of Bolt Holes D |
No. of Holes | Thk of Flange C |
Dia of Hub E |
Length Through Hub | Dia of Bore | Dia of R/F | Depth of Socket | Pipe Dia | ||||
| MM | Inch. | S/O & S/W Y |
W/N Y |
L/J Y |
S/O & S/W B |
L/J B | R | F | X | ||||||
| 15 | 1/2 | 88.9 | 60.3 | 15.9 | 4 | 11.1 | 30.2 | 15.9 | 47.6 | 15.9 | 22.3 | 22.9 | 34.9 | 9.5 | 21.33 |
| 20 | 3/4 | 98.4 | 69.8 | 15.9 | 4 | 12.7 | 38.1 | 15.9 | 52.4 | 15.9 | 27.7 | 28.2 | 42.9 | 11.1 | 26.67 |
| 25 | 1 | 107.9 | 79.4 | 15.9 | 4 | 14.3 | 49.2 | 17.5 | 55.6 | 17.5 | 34.5 | 35 | 50.8 | 12.7 | 33.4 |
| 32 | 1 1/4 | 117.5 | 88.9 | 15.9 | 4 | 15.9 | 58.7 | 20.6 | 57.1 | 20.6 | 43.2 | 43.7 | 63.5 | 14.3 | 42.16 |
| 40 | 1 1/2 | 127 | 98.4 | 15.9 | 4 | 17.5 | 65.1 | 22.2 | 61.9 | 22.2 | 49.5 | 50 | 73 | 15.9 | 48.26 |
| 50 | 2 | 152.4 | 120.6 | 19 | 4 | 19 | 77.8 | 25.4 | 63.5 | 25.4 | 62 | 62.5 | 92.1 | 17.5 | 60.31 |
| 65 | 2 1/2 | 177.8 | 139.7 | 19 | 4 | 22.2 | 90.5 | 28.6 | 69.8 | 28.6 | 74.7 | 75.4 | 104.8 | 19 | 73.02 |
| 80 | 3 | 190.5 | 152.4 | 19 | 4 | 23.8 | 107.9 | 30.2 | 69.8 | 30.2 | 90.7 | 91.4 | 127 | 20.6 | 88.90 |
| 100 | 4 | 228.6 | 190.5 | 19 | 8 | 23.8 | 134.9 | 33.3 | 76.2 | 33.3 | 116.1 | 116.8 | 157.2 | 23.8 | 114.30 |
| 125 | 5 | 254 | 215.9 | 22.2 | 8 | 23.8 | 163.5 | 36.5 | 88.9 | 36.5 | 143.8 | 144.5 | 185.7 | 23.8 | 114.30 |
| 150 | 6 | 279.4 | 241.3 | 22.2 | 8 | 25.4 | 192.1 | 39.7 | 88.9 | 39.7 | 170.7 | 171.4 | 215.9 | 27 | 168.27 |
| 200 | 8 | 342.9 | 298.4 | 22.2 | 8 | 28.6 | 246.1 | 44.4 | 101.6 | 44.4 | 221.5 | 222.2 | 269.9 | 31.7 | 219.07 |
| 250 | 10 | 406.4 | 361.9 | 25.4 | 12 | 30.2 | 304.8 | 49.2 | 101.6 | 49.2 | 276.3 | 277.4 | 323.8 | 33.3 | 273.05 |
| 300 | 12 | 482.6 | 431.8 | 25.4 | 12 | 31.8 | 365.1 | 55.6 | 114.3 | 55.6 | 327.1 | 328.2 | 381 | 39.7 | 323.85 |
| 350 | 14 | 533.4 | 476.2 | 28.6 | 12 | 34.9 | 400 | 57.1 | 127 | 79.4 | 359.1 | 360.2 | 412.7 | 41.3 | 355.60 |
| 400 | 16 | 596.9 | 539.7 | 28.6 | 16 | 36.5 | 457.2 | 63.5 | 127 | 87.3 | 410.5 | 411.2 | 469.9 | 44.4 | 406.40 |
| 450 | 18 | 635 | 577.8 | 31.7 | 16 | 39.7 | 504.8 | 68.3 | 139.7 | 96.8 | 461.8 | 462.3 | 533.4 | 49.2 | 457.20 |
| 500 | 20 | 698.5 | 635 | 31.7 | 20 | 42.9 | 558.8 | 73 | 144.5 | 103.2 | 513.1 | 514.3 | 584.2 | 54 | 508.00 |
| 600 | 24 | 812.8 | 749.3 | 34.9 | 20 | 47.6 | 663.6 | 82.5 | 152.4 | 111.1 | 615.9 | 615.9 | 692.1 | 63.5 | 609.60 |
ASA 300 CLASS
| Nominal Pipe Size | Flange Dia O |
Dia of Bolt Circle A |
Dia of Bolt Holes D |
No. of Holes | Thk of Flange C |
Dia of Hub E |
Length Through Hub | Dia of Bore | Dia of R/F | Depth of Socket | Pipe Dia | ||||
| MM | Inch. | S/O & S/W Y |
W/N Y |
L/J Y |
S/O & S/W B |
L/J B | R | F | X | ||||||
| 15 | 1/2 | 95.2 | 66.7 | 15.9 | 4 | 14.3 | 38.1 | 22.2 | 52.4 | 22.2 | 22.3 | 22.9 | 34.9 | 9.5 | 21.33 |
| 20 | 3/4 | 117.5 | 82.5 | 19 | 4 | 15.9 | 47.6 | 25.4 | 57.1 | 25.4 | 27.7 | 28.2 | 42.9 | 11.1 | 26.67 |
| 25 | 1 | 123.8 | 88.9 | 19 | 4 | 17.5 | 54 | 27 | 61.9 | 27 | 34.5 | 35 | 50.8 | 12.7 | 33.40 |
| 32 | 1 1/4 | 133.3 | 98.4 | 19 | 4 | 19 | 63.5 | 27 | 65.1 | 27 | 43.2 | 43.7 | 63.5 | 14.3 | 42.16 |
| 40 | 1 1/2 | 155.6 | 114.3 | 22.2 | 4 | 20.6 | 69.8 | 30.2 | 68.3 | 30.2 | 49.5 | 50 | 73 | 15.9 | 48.26 |
| 50 | 2 | 165.1 | 127 | 19 | 8 | 22.2 | 84.1 | 33.3 | 69.8 | 33.3 | 62 | 62.5 | 92.1 | 17.5 | 60.31 |
| 65 | 2 1/2 | 190.5 | 149.2 | 22.2 | 8 | 25.4 | 100 | 38.1 | 76.2 | 38.1 | 74.7 | 75.4 | 104.8 | 19 | 73.02 |
| 80 | 3 | 209.5 | 168.3 | 22.2 | 8 | 28.6 | 117.5 | 42.9 | 79.4 | 42.9 | 90.7 | 91.4 | 127 | 20.6 | 88.90 |
| 100 | 4 | 254 | 200 | 22.2 | 8 | 31.8 | 146 | 47.6 | 85.7 | 47.6 | 116.1 | 116.8 | 157.2 | 23.8 | 114.30 |
| 125 | 5 | 279.4 | 234.9 | 22.2 | 8 | 34.9 | 177.8 | 50.8 | 98.4 | 50.8 | 143.8 | 144.5 | 185.7 | - | 114.30 |
| 150 | 6 | 317.5 | 269.9 | 22.2 | 12 | 36.5 | 206.4 | 52.4 | 98.4 | 52.4 | 170.7 | 171.4 | 215.9 | - | 168.27 |
| 200 | 8 | 381 | 330.2 | 25.4 | 12 | 41.3 | 260.3 | 61.9 | 111.1 | 61.9 | 221.5 | 222.2 | 269.9 | - | 219.07 |
| 250 | 10 | 444.5 | 387.3 | 28.6 | 16 | 47.6 | 320.7 | 66.7 | 117.5 | 95.2 | 276.3 | 277.4 | 323.8 | - | 273.05 |
| 300 | 12 | 520.7 | 450.8 | 31.7 | 16 | 50.8 | 374.6 | 73 | 130.2 | 101.6 | 327.1 | 328.2 | 381 | - | 323.85 |
| 350 | 14 | 584.2 | 514.3 | 31.7 | 20 | 54 | 425.4 | 76.2 | 142.9 | 111.1 | 359.1 | 360.2 | 412.7 | - | 355.60 |
| 400 | 16 | 647.7 | 571.5 | 34.9 | 20 | 57.2 | 482.6 | 82.5 | 146 | 120.6 | 410.5 | 411.2 | 469.9 | - | 406.40 |
| 450 | 18 | 711.2 | 628.5 | 34.9 | 24 | 60.3 | 533.4 | 88.9 | 158.7 | 130.2 | 461.8 | 462.3 | 533.4 | - | 457.20 |
| 500 | 20 | 774.7 | 685.8 | 34.9 | 24 | 63.5 | 587.4 | 95.2 | 161.9 | 139.7 | 513.1 | 514.3 | 584.2 | - | 508.00 |
| 600 | 24 | 914.4 | 812.8 | 41.3 | 24 | 69.8 | 701.7 | 106.4 | 168.3 | 152.4 | 615.9 | 615.9 | 692.1 | - | 609.60 |
For Working Steam Pressure Upto 50 Ibs Per Sq. Inch
| Nominal Pipe size | O.D of Pipe | Dia. Of Flange | Dia. Of Bolt Circle | No. of Bolt | Dia. Of Bolt | Thickness |
|---|---|---|---|---|---|---|
| 1/2" | 21.3 | 95.3 | 66.7 | 4 | 12.7 | 4.8 |
| 3/4" | 26.7 | 101.6 | 73 | 4 | 12.7 | 4.8 |
| 1" | 33.4 | 114.3 | 82.6 | 4 | 12.7 | 4.8 |
| 1 1/4" | 42.2 | 120.7 | 87.6 | 4 | 12.7 | 6.4 |
| 1 1/2" | 48.3 | 133.4 | 98.4 | 4 | 12.7 | 6.4 |
| 2" | 60.3 | 152.4 | 114.3 | 4 | 15.9 | 7.9 |
| 2 1/2" | 73 | 165.1 | 127 | 4 | 15.9 | 7.9 |
| 3" | 88.9 | 184.2 | 146.1 | 4 | 15.9 | 9.5 |
| 3 1/2" | 101.6 | 203.2 | 165.1 | 4 | 15.9 | 9.5 |
| 4" | 114.3 | 215.9 | 177.8 | 4 | 15.9 | 9.5 |
| 5" | 141.3 | 254 | 209.6 | 8 | 15.9 | 12.7 |
| 6" | 168.3 | 279.4 | 228.6 | 8 | 15.9 | 12.7 |
| 7" | 190.5 | 304.8 | 260.4 | 8 | 15.9 | 12.7 |
| 8" | 219.1 | 336.6 | 292.1 | 8 | 15.9 | 12.7 |
| 9" | 244.5 | 368.3 | 323.9 | 8 | 15.9 | 15.9 |
| 10" | 273 | 406.4 | 355.6 | 8 | 19.1 | 15.9 |
| 12" | 323.9 | 457.2 | 406.4 | 12 | 19.1 | 15.9 |
| 14" | 355.6 | 527.1 | 469.9 | 12 | 22.2 | 19.1 |
| 16" | 406.4 | 577.9 | 520.7 | 12 | 22.2 | 19.1 |
| 18" | 457.2 | 641.4 | 584.2 | 12 | 22.2 | 22.2 |
| 20" | 508 | 704.9 | 641.4 | 16 | 22.2 | 25.4 |
| 24" | 609.6 | 825.5 | 755.7 | 16 | 25.4 | 28.6 |
For Working Steam Pressure 50 Ibs Upto 100 Ibs Per Sq. Inch
| Nominal Pipe size | Dia. Of Flange | Dia. Of Bolt Circle | No. of Bolt | Dia. Of Bolt | Thickness |
|---|---|---|---|---|---|
| 1/2" | 95.3 | 66.7 | 4 | 12.7 | 6.4 |
| 3/4" | 101.6 | 73 | 4 | 12.7 | 6.4 |
| 1" | 114.3 | 82.6 | 4 | 12.7 | 7.1 |
| 1 1/4" | 120.7 | 87.6 | 4 | 12.7 | 8.7 |
| 1 1/2" | 133.4 | 98.4 | 4 | 12.7 | 9.5 |
| 2" | 152.4 | 114.3 | 4 | 15.9 | 10.3 |
| 2 1/2" | 165.1 | 127 | 4 | 15.9 | 11.1 |
| 3" | 184.2 | 146.1 | 4 | 15.9 | 11.9 |
| 3 1/2" | 203.2 | 165.1 | 8 | 15.9 | 12.7 |
| 4" | 215.9 | 177.8 | 8 | 15.9 | 11.1 |
| 5" | 254 | 209.6 | 8 | 15.9 | 14.3 |
| 6" | 279.4 | 228.6 | 8 | 19.1 | 17.5 |
| 7" | 304.8 | 260.4 | 8 | 19.1 | 19.1 |
| 8" | 336.6 | 292.1 | 8 | 19.1 | 19.1 |
| 9" | 368.3 | 323.9 | 12 | 19.1 | 20.6 |
| 10" | 406.4 | 355.6 | 12 | 19.1 | 22.2 |
| 12" | 457.2 | 406.4 | 12 | 22.2 | 25.4 |
| 14" | 527.2 | 469.9 | 12 | 22.2 | 25.4 |
| 16" | 577.9 | 520.7 | 12 | 22.2 | 25.4 |
| 18" | 641.4 | 584.2 | 16 | 22.2 | 28.6 |
| 20" | 704.9 | 641.4 | 16 | 22.2 | 31.8 |
| 24" | 825.5 | 755.7 | 16 | 25.4 | 38.1 |
Working Steam Pressure Above 100 LBS And Upto 150 LBS Per Sq Inch
| Ominal Pipe size | O.D of Pipe | Dia. Of Flange | Dia. Of Bolt Circle | No. of Bolt | Dia. Of Bolt | Thickness |
|---|---|---|---|---|---|---|
| 1/2" | 21.3 | 95.3 | 66.7 | 4 | 12.7 | 4.8 |
| 3/4" | 26.7 | 101.6 | 73 | 4 | 12.7 | 4.8 |
| 1" | 33.4 | 120.7 | 82.6 | 4 | 12.7 | 4.8 |
| 1 1/4" | 42.2 | 133.4 | 87.6 | 4 | 12.7 | 6.4 |
| 1 1/2" | 48.3 | 139.7 | 98.4 | 4 | 12.7 | 6.4 |
| 2" | 60.3 | 165.1 | 114.3 | 4 | 15.9 | 7.9 |
| 2 1/2" | 73 | 184.2 | 127 | 4 | 15.9 | 7.9 |
| 3" | 88.9 | 203.2 | 146.1 | 4 | 15.9 | 9.5 |
| 3 1/2" | 101.6 | 215.9 | 165.1 | 4 | 15.9 | 9.5 |
| 4" | 114.3 | 228.6 | 177.8 | 4 | 15.9 | 9.5 |
| 5" | 141.3 | 279.4 | 209.6 | 8 | 15.9 | 12.7 |
| 6" | 168.3 | 304.8 | 228.6 | 8 | 15.9 | 12.7 |
| 7" | 190.5 | 336.6 | 260.4 | 8 | 15.9 | 12.7 |
| 8" | 219.1 | 368.3 | 292.1 | 8 | 15.9 | 12.7 |
| 9" | 244.5 | 406.4 | 323.9 | 8 | 15.9 | 15.9 |
| 10" | 273 | 431.8 | 355.6 | 8 | 19.1 | 15.9 |
| 12" | 323.9 | 189 | 406.4 | 12 | 19.1 | 15.9 |
| 14" | 355.6 | 552.5 | 469.9 | 12 | 22.2 | 19.1 |
| 16" | 406.4 | 609.6 | 520.7 | 12 | 22.2 | 19.1 |
| 18" | 457.2 | 673.1 | 584.2 | 12 | 22.2 | 22.2 |
| 20" | 508 | 736.6 | 641.4 | 16 | 22.2 | 25.4 |
| 24" | 609.6 | 850.9 | 755.7 | 16 | 25.4 | 28.6 |
Working Steam Pressure Above 150 LBS And 250 LBS Sq Inch
| Ominal Pipe size | Dia. Of Flange | Dia. Of Bolt Circle | No. of Bolt | Dia. Of Bolt | Thickness |
|---|---|---|---|---|---|
| 1/2" | 114.3 | 82.6 | 4 | 15.9 | 12.7 |
| 3/4" | 114.3 | 82.6 | 4 | 15.9 | 12.7 |
| 1" | 120.78 | 87.3 | 4 | 15.9 | 14.3 |
| 1 1/4" | 133.4 | 98.4 | 4 | 15.9 | 17.5 |
| 1 1/2" | 139.7 | 104.8 | 4 | 15.9 | 17.5 |
| 2" | 165.1 | 127 | 4 | 15.9 | 19.1 |
| 2 1/2" | 184.2 | 146.1 | 8 | 15.9 | 19.1 |
| 3" | 203.2 | 165.1 | 8 | 15.9 | 22.2 |
| 3 1/2" | 215.9 | 177.8 | 8 | 15.9 | 22.2 |
| 4" | 228.6 | 190.5 | 8 | 15.9 | 25.4 |
| 5" | 279.4 | 235 | 8 | 15.9 | 28.6 |
| 6" | 304.8 | 260.4 | 12 | 15.9 | 28.6 |
| 7" | 336.6 | 292.1 | 12 | 15.9 | 31.8 |
| 8" | 368.3 | 323.9 | 12 | 15.9 | 31.8 |
| 9" | 406.4 | 355.6 | 12 | 15.9 | 34.9 |
| 10" | 431.8 | 381 | 12 | 15.9 | 34.9 |
| 12" | 489 | 438.2 | 16 | 15.9 | 38.1 |
| 14" | 552.5 | 495.3 | 16 | 15.9 | 41.3 |
| 16" | 609.6 | 552.5 | 20 | 15.9 | 44.5 |
| 18" | 673.1 | 609.6 | 20 | 15.9 | 47.6 |
| 20" | 736.6 | 673.1 | 24 | 15.9 | 50.8 |
| 24" | 850.9 | 781.1 | 25 | 15.9 | 57.2 |
We are the well-known Importer and Supplier of Nickel Alloys. The Nickel Alloys are used in wide variety of applications including aerospace and defence industries, medical, nuclear power, air gas turbines, special engineering and chemical and petrochemical industries. The Nickel Alloys are available in the form of fasteners, forgings, welding rod, welding pipe and tube etc.
