Ludhiana, Punjab, India
Verified
Add Review
Our Products
We offer Mechanical Under Crank Shearing Machine.
| Specification | ||||||||||||
| MODEL | CUTTING CAP. IN M.S.LENGTH xTHICKNESS |
DEPTH OF THROAT |
STROKE PER MINUTE |
TABLE HEIGHT |
TABLE WIDTH |
FRONT GUAGE |
REAR GUAGE | MOTOR HP/KW |
Overall dimensions in mm | |||
| BLADE LENGTH x WIDTH xTHICK | LENGTH A | BREADTH B | HEIGHT C | |||||||||
| MI - 2 | 1525 x 6 | 80 | 30 | 770 | 450 | 500 | 750 | 7.5/5.6 | 1525 x 75 x 18 | 2500 | 1950 | 230 |
| MI - 3 | 2030 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 2030 x 75 x 18 | 3000 | 1950 | 2300 |
| MI - 4 | 2540 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 2540 x 75 x 18 | 3550 | 1950 | 2300 |
| MI - 5 | 3125 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 15/11.2 | 3125 x 75 x 18 | 4150 | 1950 | 2400 |
| MI - 6 | 1525 x 8 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 1525 x 75 x 18 | 2570 | 1950 | 2300 |
| MI - 7 | 2030 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 12.5/9.7 | 2030 x 75 x 18 | 3150 | 1950 | 2500 |
| MI - 8 | 2540 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 2540 x 75 x 18 | 3670 | 1950 | 2500 |
| MI - 9 | 3125 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 3125 x 90 x 18 | 4250 | 1950 | 2600 |
| MI - 10 | 2030 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 2030 x 90 x 18 | 3200 | 1950 | 2600 |
| MI - 11 | 2540 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 2540 x 100 x 22 | 3700 | 1950 | 2600 |
| MI - 12 | 3125 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 25/18.7 | 3125 x 100 x 22 | 4300 | 1950 | 2600 |
| MI - 13 | 2030 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 2030 x 100 x 22 | 3250 | 1950 | 2600 |
| MI - 14 | 2540 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 25/18.7 | 2540 x 100 x 22 | 3750 | 1950 | 2600 |
| MI - 15 | 3125 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 30/22.5 | 3125 x 100 x 22 | 4350 | 1950 | 2600 |
We offer mechanical under crank shearing machine.
| Specification | ||||||||||||
| MODEL | CUTTING CAP. IN M.S. LENGTH x THICKNESS |
DEPTH OF THROAT |
STROKE PER MINUTE |
TABLE HEIGHT |
TABLE WIDTH |
FRONT GUAGE |
REAR GUAGE | MOTOR HP/KW |
BLADE LENGTH x WIDTH xTHICK |
LENGTH A | BREADTH B | HEIGHT C |
| MI - 1 | 1250 x 3 | 60 | 50 | 900 | 450 | 500 | 750 | 3/2.0 | 1250 x 63 x 12 | 2540 | 2000 | 1250 |
| MI - 2 | 1525 x 3 | 60 | 50 | 900 | 450 | 500 | 750 | 3/2.0 | 1525 x 63 x 12 | 2540 | 2000 | 1525 |
| MI - 3 | 1525 x 4 | 80 | 50 | 900 | 450 | 500 | 750 | 5/3.7 | 1525 x 63 x 12 | 2540 | 2000 | 1525 |
| MI - 4 | 2030 x 4 | 80 | 50 | 900 | 450 | 600 | 750 | 7.5/5.6 | 2030 x 63 x 12 | 3050 | 2000 | 1525 |
| MI - 5 | 2540 x 4 | 80 | 50 | 900 | 450 | 600 | 750 | 10/7.7 | 2540 x 75 x 16 | 3550 | 2000 | 1525 |
| MI - 6 | 3125 x 4 | 80 | 50 | 900 | 450 | 600 | 750 | 12.5/9.5 | 3125 x 75 x 18 | 4200 | 2000 | 1525 |
The C-Frame Press line features a slim and clean design, allowing the operator excellent accessibility to the work area from the front as well as the sides. Ideal for rubber molding, straightening, bending, pressing, stamping, and die cushion work, C-Frame Presses offer an outstanding price-performance ratio.
| Specification | ||||||||||
| MODEL | UNITS | MIHF - 400 | MIHF - 600 | MIHF - 750 | MIHF - 1000 | |||||
| Capacity | Tons | 400 | 600 | 750 | 1000 | |||||
| Tonnage Rating Point | mm | 2 | 3 | 3 | 3 | |||||
| Stroke Length | 175 | 200 | 225 | 250 | 90 | |||||
| Stroke Per Minute | S.P.M | 60 | 55 | 50 | 45 | |||||
| Die Height | mm | 530 | 560 | 540 | 700 | |||||
| Adjustment Of Slide | mm | 6 | 6 | 8 | 10 | |||||
| Bolster Area (LR X FB) | mm | 600x700 | 680x780 | 730x890 | 920x1050 | |||||
| Slide Area (LR X FB) | mm | 580x600 | 650x670 | 720x780 | 880x900 | |||||
| Side Opening (W XH) | mm | 320x520 | 360x580 | 400x600 | 460x600 | |||||
| Main Motor | Kw / Hp | 22 / 30 | 37 / 50 | 45 / 60 | 55 / 75 | |||||
| Adjustment Motor | mm | 0.5 | 0.75 | 1.5 | 1.5 | |||||
| Air Pressure | Kg./Cm2 | 5.5 | 5.5 | 5.5 | 5.5 | |||||
| Lower Ejector Type | AIR | AIR | AIR | AIR | AIR | |||||
| 1. Capacity | TONN | 1.5 | 2 | 4 | 5 | |||||
| 2. Stroke | mm | 40 | 40 | 40 | 50 | |||||
| 3. Pin Dia | mm | 40 | 50 | 50 | 50 | |||||
The C-Frame Press line features a slim and clean design, allowing the operator excellent accessibility to the work area from the front as well as the sides. Ideal for rubber molding, straightening, bending, pressing, stamping, and die cushion work, C-Frame Presses offer an outstanding price-performance ratio.
| Specification | ||||||||||
| SPECIFICATIONS | 10 Tons | 20 Tons | 30 Tons | 50 Tons | 80 Tons | 100 Tons | 150 Tons | 200 T | 250 T | |
| Bed Size LR x FB | mm | 482 x 318 | 542 x 360 | 644 x 406 | 750 x 508 | 813 x 546 | 940 x 623 | 1016 x 665 | 1100 x 700 | 1200 x 800 |
| Bed to Ram Bottom | mm | 243 | 276 | 330 | 358 | 373 | 535 | 590 | 615 | 635 |
| Stroke Adjustable or Fix | mm | 51 | 63 | 76 | 90 | 102 | 114 | 130 | 150 | 175 |
| Adjustment of Slide | mm | 25 | 28 | 30 | 35 | 35 | 40 | 45 | 50 | 50 |
| Bolster Thickness | mm | 67 | 67 | 72 | 85 | 85 | 85 | 95 | 100 | 120 |
| Bed Opening | mm | 100 | 100 | 125 | 150 | 150 | 175 | 175 | 200 | 200 |
| Shank Hole Dia | mm | 32 | 40 | 40 | 46 | 50 | 53 | 57 | 57 | 65 |
| Floor to Top of Bed | mm | 735 | 726 | 773 | 820 | 836 | 850 | 850 | 850 | 850 |
| No. of Strokes per Min | S.P.M. | 55 | 50 | 45 | 40 | 40 | 40 | 35 | 30 | 28 |
| Motor Power Required | H.P. / RPM | 1.5 /1440 | 2 / 1440 | 3 / 1440 | 5 / 1440 | 7.5 / 1440 | 10 / 1440 | 15 / 1440 | 20 / 1440 | 25 / 1440 |
