Belts #1268128

We also give service of Hot and cold Vulcanizing of conveyor belt. We also supply Cold Vulcanizing Solution in bulk order.Chevron Cleated Belts offered by us with International Standards.

Our Conveyor Belting complies with all known international standards. It can work in areas of bulk material handling from the lightest to the most difficult of the working conditions.

Rough Top Conveyor Belt; Herringbone Pattern Conveyor Belt; Weigh Feeder Belts and a host of other options are available in open ends and endless forms.

With smooth surface conveyor belts the maximum conveying angle of inclination is approximately 20 degrees depending on the material. If steeper angles of inclinations are required the same is made possible by using Chevron Cleated Belts.Chevron Conveyor Belt have rubber profiles that are integrally vulcanized with the top cover of the belt. These profiles are made with highly abrasion resistant rubbertypes and are offered in Softer Compounds(45-50 Shore)as also 60 shore materials. The profiles are shaped in such a manner that there is no need for special idlers and these can be run on conventional conveyors. The pitch of the Chevron ensures a smooth ride over flat return Idlers.

We offer a wide range of Profiled Chevron Cleated Belts, which make increased angles of 30 degrees to 40 degrees inclination possible. The advantage of high angle of inclination is that less space is needed to reach the desired conveying height.

Small Pulleys, short centers, narrow belts, high capacity all these inherent features can be combined to reduce space requirements. Center distance can be permanently established.Because of advanced design, backlas- between the teeth of the stock belts and the grooves of stock pulleys is reduced to a negligivle minimu. Thus Positive Drive Belt Drives frequently outperform prevision gear drives.These drives do not require motor bases, lubrications systems, tensioning devices, thus minimizing original and maintenance costs.

Used Conveyor Belts are made by nylon-nylon.Number of plies : 4 Plies and 5 Plies, Thickness : 12MM and 14 MM, Length or rolls: 30Mtrs upto 90 Mtrs.

Chevron Cleated Belts offered by us with International Standards.Our belt width is depending upon the profile; Chevron belts are available in standard width from 400 mm to 1200 mm.

Our Conveyor belts are manufatured confirming to international standards. We provide all types of Rubber conveyor belts like:Our Conveyor Belting complies with all known international standards. It can work in areas of bulk material handling from the lightest to the most difficult of the working conditions.

The belts with the CLEAT are moulded integrally with Top Rubber Cover and consequences will withstand harsh treatment without seperation. Rubber CLEATS increases the capacity of Belt to elevate loose materials and permit steeper Angles of inclination without damaging the products. A wide choice of CLEAT LAYOUT can be made on the belt.

We exports various types of Special Purpose Rubber Conveyor Belts likeRough Top Belt, Full Width Cleat, Cleats with Additional Gaps, Cleats with Gap, Trutack Control Guide Cleat, Alternate Offset Cleats, Chevron Cleats, Side Walls Cleats, Hooper Belt, Pipe Belt.

Rough Top Belt :Rough Top belt is designed for transporting light weight goods, either being inclined or being horizontal, also suitable for transporting fragile or deformed materials and packed goods, such as glass, papers, bags, boxes or cartons at angle from 15 to 35 degree.

Special features:

• Available with bare back bottom cover, to give excellent grip to the conveyor belt. The bareback Rough Top belt makes less friction coefficient, suitable for running over table and flat panel.
• Black cover for utility applications
• Tan cover for non-marking applications such as packaged food.
• The design of mesh-like pattern on the top surface cover can generate the relief effect, absorbing any vibrations and impacts exerted on the materials conveyed and simultaneously preventing the material from slip.
• Provides excellent grip between belt top and packages, such as cartons, jute packages.

Construction and Properties:

• 2 or 3-ply construction with cut edges and a carcass of synthetic EP fabric.
• The surface texture resists the tendency for the material to roll back down the conveyor.
• The black top cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless, nontoxic, non-marking belt is a necessity.Top cover is a full 1/8 thick SBR and the back is protected by either a durable friction surface bottom or a synthetic bareback for slider bed applications.

Full Width Cleat :Cleats are hot vulcanized to the base belt for a bond the full width of the cleats, making them an integral part of the belt top cover. According to its operational requirement and lump size, the shape and pitch of the rubber cleat can adequately be made.
It is used in cattle (cows, etc.) feeding machines in agricultural business, mostly used in larger stables.

Chevron Cleats :Chevron BElts are used for any purpose when handling bulk material. When using a flat belt the maximum angle of inclination is approx 15-20 degrees. By using a chevron belt this enables inclination of up to approx 40 degrees to be achieved.
Chevron cleats are hot vulcanised onto basebelts and manufacturedin a flexibleand wear resistant black rubber quality. In addition to our standard programme we can offer special constructions as e.g. 2 rows of chevron. All types of cleats can be fitted onto any EP conveyor belt.

Side Walls Cleats :Our sidewall belts are available in heights of 40-400 mm. It is constructed according to the high demands of flexibility and elesticity around the pullies, as well as for consideration to return side support. Our sidewalls can also be delivered with fabric, which gives considerable stability and strength.

Hooper Belt :This is a special purpose belt used in Fertiliser and Chemical Plants. The Belt is fitted with special type of Stainless Steel Eyelets.

Pipe Belt :Pipe Lifter Belt is for Lifting heavy Pipes. The belt can be of 5/6/7 ply of Nylon / Polyester Fabric and is fitted with specially made Aluminium or Iron clamps and steel wire ropes

Special features:

• Avoids pollution by preventing falling or spillage of Carried products.
• Avoids damage to belt inner surface, as fallen objects do not attach to belt surface.
• Prevents other substances from entering, assuring purity of products.
• Reduces abrasion between the products and inner belt surface which increases when conveyor belts are in pipes, enabling greater transportation degree than other commonly used belts.
• Suitable rigidity, flexibility, be keeping stable circle.
• Good sealing at connection point, fatigue resistant, abrasion resistant, stable conveying.
• Close conveying, no spillage, no dust.
• Bending, steep angle, reverse conveying.
• Application: Widely used in material conveying in mining, power, building material and chemical industry.

We offer conveyor belts in a standard range manufactured in two to six plies. This enables selection of the most appropriate construction for every conceivable application.

Our conveyor belting comples with all known international standards. It can wok in areas of bulk material handling from the lightest to the most difficult of the working conditions. be it in the Stone Quarrying or earth moving industry, in the Steel, Cement or Mining Industy.

For those applications where the customer prefers to use the modern minimum ply concept Conveyor Belting, wherein the height of fall on the belt is more and special impact conditions have to be considered.

Belt Width:The Belts are available in standard widths in full ply width upto 1600 MM.

Belts with longitudinal ply joints can be given in widths of 1800mm and 2000mm.

Belt Edges:Belt edges can be given in both cut and sealed(Moulded) edges.

Cover Qualities:The top and bottom covers provide protection to the carcass. Cover quality is always selected according to the material to be conveyed and the service conditions.
We offer a wide range of cover qualities conforming to Indian & International Standards to suite various application areas.

Used Conveyor Belts are made by nylon-nylon.
Number of plies : 4 Plies and 5 Plies
Thickness : 12MM and 14 MM
Width : 800, 1200, 1400 MM
Length or rolls: 30Mtrs upto 90 Mtrs