Ahmedabad, Gujarat, India
Our Products
Description:
1. The machine is our own designed and manufactured product which is at the base of introducing advanced international technology and combining industry character of India. It is stable, independable and strongly adaptable.2. It can be changed according to clients different requirement to the bottles3. Easy operation, fully automatic, with PLC control to adjust the frequency to synchronize with the whole line.4. Bottle exit is controlled by the synchronous belt and star wheel to ensure stable bottle exiting and no scrambling bottles and crushing.
Functions of 5 Gallon Filling Machine:
1. High safety operation: automatic break protection for power leakage and short circuit;2. Under-pressure protection: when the pressure of incoming air is 0.5MPa, the filling equipment will automatically stop;3. Water-shortage protection: when the level of the water tank is lower than that of the liquid switch, the 5 gallon filling machine will stop working automatically.
Remarks:
More functions for our 5 gallon filling machines like hot tank heating washing, bottle external washing, bottle cap washing and human-computer interface control etc. could be provided upon request.
| Model | MJF 60 | MJF 120 | MJF 250 | MJF 450 | MJF 600 | MJF 900 | MJF 1200 |
| Output Bottle/H | 60 | 120 | 250 | 450 | 600 | 900 | 1200 |
| Voltage | AC220V/380V±5% 50HZ/60HZ | ||||||
| Rated Power | 1.6KW | 4.95KW | 7.16KW | 19.1KW | 24.8KW | 36KW | 46KW |
| Washing heads | 1×3 | 1×5 | 2×5 | 3×7 | 4×9 | 6×10 | 6×13 |
| Filling heads | 1×1 | 1×1 | 2×1 | 3×1 | 4×1 | 6×1 | 8×1 |
| Capping heads | 1×1 | 1×1 | 2×1 | 1×3 | 1×1 | 1×1 | 1×1 |
| Bottle size | Ф270×490×Ф56 mm | ||||||
| Cap size | Ф58×40(Tail: L×W=18×7.5) mm | ||||||
| Air pressure | 0.5ï½ï¿½0.6MPa | ||||||
| N.W. | 195Kg | 300Kg | 395Kg | 950Kg | 1450Kg | 2000Kg | 2600Kg |
| Overall Dimension(MM) | 2710×500×1600 | 3245×500×1600 | 3245×800×1600 | 4390×1100×1760 | 471 | ||
Description:
Introduction:-
We are pioneer in Used Oil Re-Refining Plant Manufacturing, Erection and Installation.
Lubricating oil after prolonged use in the engines crankcase gets degraded due to oxidation, presence of water, carbon particles, oxidation sludge etc. This oil, if not replace, will cause failure of the engine. The disposal of used oil is a major environmental problem unless it is processed safely as the indiscriminate disposal will cause pollution to water bodies and land fillings.
The proposal is to manufacture petroleum lubricant oils and other petroleum based products, from waste / used oils and manufacture of lubricants to the specification required to satisfy the International specifications.
General Process for Used Oil Re-Refining:-
The process involves below different stages.
Capacity Available:-
2 MT / Day to 50 MT / Day Used (Waste) Oil Re Refining (Recycling)Plants.
| Model No. | Application | Capacity | Output |
| MAE-DH-024 | Mineral Water. | 100ml - 300ml. | 3600 - 4000 Pouch/Hr. |
| MAE-DH-025 | Mineral Water With P.C.B. | 100ml - 300ml. | 3600 - 4000 Pouch/Hr. |
| MAE-DH-026 | Milk & Butter Milk | 200ml to 1000ml. | 1800 - 2400 Pouch/Hr. |
| MAE-DH-027 | Milk & Butter Milk With P.C.B | 200ml to 1000ml. | 1800 - 2400 Pouch/Hr. |
| MAE-DH-028 | Oil, L.D.Material (Film) | 200ml to 1000ml. | 1800 - 2400 Pouch/Hr. |
| MAE-DH-029 | Oil With P.C.B L.D.Material (Film) | 200ml to 1000ml. | 1800 - 2400 Pouch/Hr. |
| MAE-DH-030 | Ghee L.D.Material (Film) | 200ml to 1000ml. | 1200 - 1800 Pouch/Hr (At 450 C) |
| MAE-DH-031 | Ghee L.D.Material (Film) With P.C.B | 200ml to 1000ml. | 1200 - 1800 Pouch/Hr (At 450 C) |
| Model No. | Application | Capacity | Output |
| MAE-SDWM-095 | Pulses, Granules, Cashew nuts, Snacks etc. | 100gm – 1kg | 600 - 900 Pouch/Hr. |
| MAE-SDWM-096 | Pulses, Granules, Cashew nuts, Snacks etc. | 1kg – 5kg | 450 - 600 Pouch/Hr. |
| MAE-SDWM-097 | Pulses, Granules, Cashew nuts, Snacks etc. | 5kg – 10kg | 150 - 450 Pouch/Hr. |
| Model No. | Application | Capacity | Output |
| MAE-FDWM-098 | CHIPS (Wafers), Kurkure, Peanuts, Cashew Nuts, Snacks, Granules etc. | 10gm – 100gm | 900 – 1800 Pouch/Hr*. |
| MAE-FDWM-099 | CHIPS (Wafers), Kurkure, Peanuts, Cashew Nuts, Snacks, Granules etc. | 100gm – 1kg | 600 – 900 Pouch/Hr*. |
| Model No. | Application | Capacity | Output |
| MAE-CWF-101 | Potato/banana chips, chess ball, kurkure, snaks, Namkeen, Candy & Other Hard – small – piece Based Products etc. | 10grm - 100gm | 3400 – 4800 Pouch/Hr. |
| MAE-CWF-102 | Potato/banana chips, chess ball, kurkure, snaks, Namkeen, Candy & Other Hard – small – piece Based Products, etc. | 100gm – 1kg | 2000 – 3400 Pouch/Hr. |
| Model No. | Application | Output |
| MAE-HOR-104 | Detergent Soap, Toast, Biscuit, Ice Candy Etc. | 40 – 60 Pouch /Hr. |
Semi Auto Rotary Bottle Washing Machine Suitable for washing various type of bottles ranging from : 15 ml. To 500ml. Provided with four different washes. Out put : 100 bottles per minute. Machine with Geneva cam mechanism. The main drive is provided with clutch.
| Maximum dia. Of bottle | 85mm |
| No. of spray nozzles | 16Nos. |
| No. of bottle holders | 64Nos. |
| Electric connections | A. 2 Nos. electric motors for pumps 1 H.P., 750 RPM, 440 Volt 1 No. electric motor for drive 0.5 H.P., 750 RPM, 440 Volts |
| S.S. Storage tanks | 2 Nos. Each of 80 ltrs. Capacity |
| 3 /4” Centrifugal Pumps | 2 Nos |
| Change in Cap size | (a) Plunger (Die) ___________________________________________ (b) Delivery Chute for more then 3mm Difference in cap dia. |
| Change in Bottle Diameter | (a) Star Wheel (3Nos) ___________________________________________ (b) Bottle Guides |
| Power Required | (a) 1 HP, 440 Volt, 1440 RPM, for main M/c. ___________________________________________ (b) 0.25 HP, 440 Volt 1440 RPM for Hopper. |
| Type | MMGF 60-60-15 | MGF 50-50-12 | MMGF 40-40-10 | MMGF 32-32-10 | MMGF 24-24-8 | MMGF 18-18-6 | MMGF 16-16-5 | MMGF 12-12-6 | MMGF 8-8-3 |
| Wash No. | 60 | 50 | 40 | 32 | 24 | 18 | 16 | 12 | 8 |
| Filling Heads | 60 | 50 | 40 | 32 | 24 | 18 | 16 | 12 | 8 |
| Capping heads | 15 | 12 | 10 | 10 | 8 | 6 | 5 | 6 | 3 |
| Productivity | 25000b/h | 20000b/h | 15000b/h | 12000b/h | 10000b/h | 8000b/h | 6000b/h | 3600b/h | 1500b/h |
| Main power | 10kw | 7.5kw | 5.2kw | 4.8kw | 4kw | 3kw | 3kw | 3kw | 3kw |
| Type | MMGF 60-60-15 | MGF 50-50-12 | MMGF 40-40-10 | MMGF 32-32-10 | MMGF 24-24-8 | MMGF 18-18-6 | MMGF 16-16-5 | MMGF 12-12-6 |
| Wash No. | 60 | 50 | 40 | 32 | 24 | 18 | 16 | 12 |
| Filling Heads | 60 | 50 | 40 | 32 | 24 | 18 | 16 | 12 |
| Capping heads | 15 | 12 | 10 | 10 | 8 | 6 | 5 | 6 |
| Productivity | 25000b/h | 20000b/h | 15000b/h | 12000b/h | 10000b/h | 8000b/h | 6000b/h | 3600b/h |
| Main power | 10kw | 7.5kw | 5.2kw | 4.8kw | 4kw | 3kw | 3kw | 3kw |
| Model | MDSE-350 | MDSE-355 |
| Material | PP/PE | PP/PE |
| Color | 1 Color Straw & 2 Color Line | 1 Color Straw & 2 Color Line |
| Production Diameter | 1 mm – 14 mm | 1 mm – 14 mm |
| Production Length | 3mm - 1000mm | 3mm - 1000mm |
| Production Capacity | Max>35Kg/Hour | Max.>45Kg/Hour |
| Line Speed | Max>250Meter/Min | Max>250Meter/Min |
| Main Motor | VS7.5Kw By inverter Control | VS11Kw By inverter Control |
| Assistant Motor | 2 X VS0.75Kw By inverter Control | 2 X VS0.75Kw By inverter Control |
| Heater Capacity | 12 Kw | 14 Kw |
| Temperature Control | 11 Set | 11 Set |
| Forming & Water Cooling Unit | 3.5Meter (Can Choose 5 Meter) | 3.5Meter (Can Choose 5 Meter) |
| Traction & Cutting Unit | 2 X VS0.75Kw By inverter Control | 2 X VS0.75Kw By inverter Control |
| Total Power | 24KW | 30Kw |
| Total Power Used | 15KMH/H | 15KMH/H |
| Weight | 1200KG | 1400Kg |
| Dimension | 10 Meter X 2 Meter | 10 Meter X 2 Meter |
