GST : 27AAAFM1518R1Z0
Write a Review
Our Products
We are leaders in the market for providing best range of High Carbon High Chromium Steel, Spring Steel Sheet, Hot Die Steel, Plastic Mould Steel and Tool Steel
| View | Chemical Analysis% | Heat Treatment | Corresponding Specifications | |||||||||||
| C% | Si% | Mn% | Cr% | Mr% | W% | V% | Co% | Hardening Temperature | Quenching Medium | Tempering Temperature | Japan JIS | A / Si | Poldi Thread | |
| W 300 | 0.32 To 0.42 | 0.80 To 1.20 | < 0.50 | 4.50 To 5.50 | 1.00 To 1.50 | - | 0.30 To 0.50 | - | 1000-1040 | Oil / Air | 550-650 | SKD 6 | H-11 | TLH |
| W 302 | 0.32 To 0.42 | 0.80 To 1.20 | < 0.50 | 4.50 To 5.50 | 1.00 To 1.50 | - | 0.80 To 1.20 | - | 1020-1080 | Oil / Air | 550-650 | SKD 61 | H-13 | TLI |
| W 100 | 0.25 To 36 | < 0.40 | < 0.60 | 2.00 To 3.00 | - | 9.00 To 10.00 | 0.30 To 0.50 | - | 1070-1150 | Oil / Air | 600-650 | SKD 5 | H-21 | 212 D2 |
| View | Chemical Analysis% | Heat Treatment | Corresponding Specifications | |||||||||||
| C% | Si% | Mn% | Cr% | Mo% | W% | V% | Co% | Hardening Temperature | Quenching Medium | Tempering Temperature | Japan JIS | A / Si | Poldi Thread | |
| M 201 | To 0.45 | To 0.40 | To 1.60 | To 2.10 | To 0.25 | - | - | - | - | - | - | - | - | - |
| M 200 | 0.35 To 0.45 | 0.30 To 0.50 | 1.40 To 1.60 | 1.80 To 2.00 | 0.15 To 0.25 | P / 0.030 | S / 0.05 To 0.10 | - | 840-860, 860-880 | Oil / Air | 600-650 | - | P-20 +S | - |
| M238 | 0.35 To 0.45 | 0.20 To 0.40 | 1.30 To 1.60 | 1.80 To 2.10 | 0.15 TO 0.25 | NI / 1.0 | - | - | 840-870 | Oil | - | - | P-20 +N | - |
| M 310 | 0.38 To 0.45 | 0.30 To 0.50 | 0.20 To 0.40 | 12.50 To 13.50 | - | - | - | - | 1000-1050 | Oil | 100-200 | SUS 420 J2 | STAVEX | - |
| M 300 | 0.33 To 0.43 | 1.00 MAX | 1.00 MAX | 15.00 To 17.00 | 1.00 To 1.30 | Ni / 1.00 MAX | - | - | 1000-1050 | Oil / Air | 600-700 | - | RAMEX | - |
| View | Chemical Analysis% | Heat Treatment | Corresponding Specifications | |||||||||||
| C% | Si% | Mn% | Cr% | Mo% | W% | V% | Co% | Hardening Temperature | Quenching Medium | Tempering Temperature | Japan JIS | A / Si | Poldi Thread | |
| K 100 | 1.90 To 2.20 | 0.10 To 0.40 | 0.15 To 0.45 | 11.00 To 12.00 | - | - | - | - | 930-930 | Oil / Air | 150-200 | SKD-1 | D-3 | 2002 |
| K 105 | 1.55 To 1.75 | 0.25 To 0.40 | 0.20 To 0.40 | 11.00 To 12.00 | 0.50 To 0.70 | 0.40 To 0.60 | 0.10 To 0.50 | - | 650-700 | Oil / Air | - | SKD-11 | D-2 | 2002 R |
| K 110 | 1.50 To 1.60 | 0.10 To 0.40 | 0.15 To 0.45 | 11.00 To 12.00 | 0.60 To 0.80 | - | 0.90 To 1.10 | - | 650-700 | Oil / Air | - | SKD-11 | D-2 | - |
| K 450 | 0.90 To 1.06 | 0.15 To 0.35 | 1.00 To 1.20 | 0.50 To 1.20 | - | 0.50 To 0.70 | 0.50 To 0.15 | - | 780-820 | Oil | 150-200 | SKD-21 | D-1 | STABIL-K |
| K 720 | 0.85 To 0.96 | 0.10 To 0.40 | 1.90 To 2.10 | 0.20 To 0.50 | - | - | 0.05 To 0.15 | - | 790-820 | Oil | - | - | D-2 | STABIL SPECIAL |
Shirish Shah (Mascot Steel Centre)
9/14, Kumbharwada 5th Lane, Maruti Mandir Marg, Mumbai, Maharashtra - 400004, India
Share us via
