• 75 mm O.D. Tube / 50 mm Rod Max.350 mm x 180 mm x 50 mm - 2 Nos. / Unit.
• 5.62 Kw / 7.5 H.P. 1400 RPM 3 Phase Wheel Head Motor / Unit 0.75 Kw / 1 H.P. 1400 RPM 3 Phase Control Wheel Motor / Unit.1500 mm x 900 mm x 1600 mm
• 1500 KG750 mm

• 3 H.P. 3 Phase 50 Cycle20 to 90 RPM
• H.S.S. Saw Blade O.D. 250mm, 300mm & 350mm1/8 H.P.
• PV Type & A/C Type 4~6 Kgs240 Kgs.

• 10mm to 100mm10mm to 100mm
• 0.75 KW / 1 H.P. 1440 RPM600 mm x 1500 mm

This flat polishing machine is an import substitute boasting of international features and comes with one or more working heads and is perhaps the most well designed polishing machine suitable for cylindrical surfaces of steel, stainless steel alloys, Resin or any other material so long as it is bar or tube shaped. The machine is of rigid built to avoid any vibration and uses flap wheels the latest in polishing technology, which gives extremely good finish requiring no further processing. While the motorized wheel head unit moves on guide ways to accommodate reduce in diameter of the flap wheels. The control wheel head is driven by oil bath lubricated. ROTOMOTIVE ITALIAN GEAR BOXES and allows variable advancement speed. The units come with optional dust extraction facility.

Burrs and sharp edges are always a problem. They can cause injuries and impair product quality. They reduce productivity and consequently threaten your competitive position. Do not under estimate the problems of Burr. Special Features  Fully Automatic Loading, Feeding, Clamping and Chamfering. ID and OD Chamfer Done Automatically on Both Ends. Variable Speed on Machining Heads for Chamfering Different Sizes. Length Tolerance Achieved +/- 0.15 mm. Rigid Steel Body. One Head is Fixed and the Other Moves on Hardened and Ground Bed With the Built in Carriage to Accommodate Variable Lengths. Specially Designed Tool Head Carries Three Tool Bits for Superb Finish. Operator Friendly PLC Driven Control Panel. Chamfering Heads Move on Linear Motion Guides. Standard Accessories One Tool Set. One Set of Clamping Jaws. One set of Tool Holders.

• 110 mm100 mm x 100 mm
• 150 mm x 80 mm75 mm
• 65 mm x 65 mm20 to 120 RPM
• H.S.S. Saw Blade 200 to 350, Arbor Hole 32 mm Pin Hole 2 X 11 X 63 P.C.D. mm1000 mm x Any Number of Times
• 50 ltr. x Pump Pressure 28-40 Kg/Cm23 HP / 4 Pole / 1440 RPM / 3 Phase
• 1/8 HP / 3 Phase1050 Kg

• 4000 to 12000 (Pcs / 8 Hours)50 mm
• 10"1/5 K.W. / 2 H.P.
• 800 mm x 1300 mm450 KG

• 10mm to 100mm10mm to 100mm
• 0.75 KW / 1 H.P. 1440 RPM600 mm x 1500 mm

• 75 mm O.D. Tube / 50 mm Rod Max.350 mm x 180 mm x 50 mm - 2 Nos. / Unit.
• 5.62 Kw / 7.5 H.P. 1400 RPM 3 Phase Wheel Head Motor / Unit 0.75 Kw / 1 H.P. 1400 RPM 3 Phase Control Wheel Motor / Unit.1500 mm x 900 mm x 1600 mm
• 1500 KG750 mm

• 1 No.5 No.
• 65 - 500 mm25 mm Max.
• 8 mm Max.8 mm Max.
• 70 to 140 teeth / min0 - 30 Deg.
• 150 mm x 25.4 mm x 1.5mm2800 RPM

This flat polishing machine is an import substitute boasting of international features and comes with one or more working heads and is perhaps the most well designed polishing machine suitable for cylindrical surfaces of steel, stainless steel alloys, Resin or any other material so long as it is bar or tube shaped. The machine is of rigid built to avoid any vibration and uses flap wheels the latest in polishing technology, which gives extremely good finish requiring no further processing. While the motorized wheel head unit moves on guide ways to accommodate reduce in diameter of the flap wheels. The control wheel head is driven by oil bath lubricated. ROTOMOTIVE ITALIAN GEAR BOXES and allows variable advancement speed. The units come with optional dust extraction facility.

• 3 H.P. 3 Phase 50 Cycle20 to 90 RPM
• H.S.S. Saw Blade O.D. 250mm, 300mm & 350mm1/8 H.P.
• PV Type & A/C Type 4~6 Kgs240 Kgs.