Matharu Maize Thresher is designed for de-husking and shelling at the same time. The machine is quite simple provided with PTO arrangement, easy to transport.
The maize cobs are put into hopper from where they goes into drum.

Special Features

• Frame strength:- Heavy and reinforced metal has been used to increase structure strength.


• Rust Proof Cylinder:-Hard chrome plating has been used to make the cylinder rust free.


• Rust Proof Structure:- Whole structure of lift has been made rust proof by giving special treatment to metal and applying PU special primer. This will make the structure rust proof resulting in long time service.


• Safety:- Safety valve and pressure gauze has been provided on Pneumatic pressure tank. Safety valve will provide safety and pressure gauge will indicate the Pneumatic pressure in the tank.

Special Features

• Extra heavy duty frame


• Heavy Cylinder for stability & better performance


• Single phase power pack. No. need of 3 phase electricity Connection.


• 2-way adjustable front mounting for different models of vehicles.


• Lift is fully trench able so space can be used when lift is in close position.


• Some portion of the lift is covered with sheet so lift can be installed where the space is tight in workshop.


• Operating leaver easily approachable for operator to have full control for lifting and downing of the lift.


• Backside of the lift is open so mechanic can easily go under the vehicle for its repairing.

Each Supply of Laser Guided Land Leveller contains a Laser Controller's kit having the
Following Parts.

• Self Levelling Rotary Laser Model AG 11


• Blade Control Laser Receiver Model LR 250


• Control Box Model CB 104


• Mouting clamp Survey Receiver


• Remote control for Rotary Laser


• Receiver Cable


• Direction Control Valve Cable


• Power Cable


• 12 volt AC Charger


• 12 volt to 5 volt Dc convertor ( 1 extra small lead )


• 12 volt Batteries ( 2pc.)

Special Features

• The quality and quantity of drained oil can be checked in the collecting Bowl.


• Measurement of drained oil is possible.


• Re-use the oil if usable.


• Movable trolley which can be moved to any corner of the workshop.


• When tank is filled it can be emptied in the barrel through pneumatic pressure.


• It is attractive to look at.


• It keeps the whole floor clean because it does not allow dripping of oil.


• Very easy to use.


• Weight 25 Kg. Approx


• Weight with Wooden Packing 60 Kg. Approx.

Setting of oil to be dispensed is very simple, fast and accurate. Highest accuracy in dispensing because of highly sensitive mechanical & electronic systems. Stops oil dispensing automatically at the set quantity. Flow of Oil can be stopped by releasing the unbutton and when again pressed the run button the flow will start form the reading it has stopped at Locking key provided to have a check on stock, total oil dispensed and pilferage. Machine is movable to be carried to any corner of workshop Facility to know the total quantity of oil put into difference vehicles No wastage of Oil.

This Rotary laser is specially manufactured for
leveling the agriculture land. Its performance is
highly accurate even in long time continoues
use in tough conditions.

MATHARU LR 250 laser receiver is a rugged, multipurpose and easy to use apparatus. Four sets of photocell sensors are provided spaced at 90 to allow 360 reception. It detects laser light generated by almost all rotary laser transmitter even if the laser is visible or invisible. This receiver is designed specially to control leveller blade.It communicate the position of laser beam to hydraulic valve through Control box CB 104. It has 2 types of dead band setting to meet job site requirement

Matharu CB 104 control box is used to transfer the message received from laser Receiver LR 250 to hydraulic valve. The 5 channel LED display shows the position of laser beam on Laser Receiver. It has two modes auto and manual. In auto mode it control the valve automatically but in manual it only shows the position of laser on display but does not give message to the valve. The up down button allows to raise or down the blade as per your requirement. The control box is mounted in cabin of tractor and connected with cables to laser receiver, hydraulic valve and power.

This"MATHARU"Roller Test Bench is designed specially for those who want to install it in workshop and want to mobile it. No trench or special installation is required. Just place it on the floor and it is ready to use. Cheaper in cost, Elegant in design advancedDLCtechnology, Only 15 ml fuel consumption for one fuel test and many more advance features are in thisIMP 3 MRTB.

It is an Agricultural implement to cultivate the land. It is specially designed for cultivating and plaining the land in one go. It simultaneously crushes and mixes the stubble of crop in the soil.

This machine is specially designed for sowing directly after harvesting of paddy or any crop and side by side crushing & mixing the stubble of paddy or any crop in the soil. This Roto Seed Drill has 2 boxes on its top for seed & fertilizer. So we can say that this agricultural Implement is all in one as it cultivates the land, prepare it for sowing and then sows and give fertilizer for growth of seeds. This is the specialty of this Implement. Our Rotavator and Roto Seed Drill is specially designed with more working width having more blades than the ones Generally available in the market. It is also more heavier than the others found in the market.

By use of Roto Seed Drill we save

• Diesel up to 60%.
• Saves Wear & Tear of Tractor and Cultivating implements
• We save time and save Revenue.

This smart chain cleaner is an equipment which very smartly faciliates three function of chain cleaning at a very low cost and within a short snap of time.It cleans, dries and lubricates a chain within 6 minutes and at a very low cost.

Specile Features:-