Goods Lift #1600260

We are the reckoned Manufacturer and Supplier of Goods & Passenger Lifts. These Goods & Passenger Lifts are used in factories, storage areas, cement plants, etc. to carry goods from one floor to another, weighing up to 5 tons. The Goods & Passenger Lifts are available at range from 250 kgs to 10 tons. Goods as well as people can be transported to any number of floors. The Goods & Passenger Lifts can open on the opposite side also (2 side open cabin). Sizes Available : Can vary from 3' x 2' to as large as 12' x 20' with standard height of the cabin as 6' 71/2" Two kinds of Goods & Passenger Lifts are

• Drum-Wound Type Without Counterweight : The Drum-wound machine based lift is simpler in design and suited for low-cost installations. The movement of the lift is based on the coiling and uncoiling of a wire rope on a rotating drum. A unique feature of our drum design is the provision of two ropes coiling separately on a right hand thread groove and a left hand thread groove. This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
• Traction Type With Counterweight : The traction machine based lift is a better machine design wise and also offers greater safety to the user. This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave. Second, there being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel. Unlike in the drum wound design there is no overload on the motor in case of lift overshooting at the top floor. Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum-wound lifts using the same power.

Details

• Machine Room Height M 2430 Overhead (0.7m/s speed) 'Op - 3950
• Pit Depth 'P1 - 1650 Overhead (> 0.7 m/s speed)'O1 - 4600
• Any number of floors can be served. The Side elevation shows only the Top Floor
• Bottom Floor for the respective height requirements
• All Door heights will be 2000 clear. Door Lintel Bottom should be at 2150 from FFL
• Two-side open door is possible at ground floor at the same or different level
• Plan for Manual Swing doors / Telescopic doors are different
• All Sizes are inside finished dimensions in mm
• All Hoist-way walls are 230 mm thick Brick or 150 mm RCC walls

Client's Scope

• Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside
• Three Phase Electric Supply
• Scaffolding during Lift erection
• Provision of sill support, machine support, Lifting beam / hook, pit ladder, etc.
• Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
• Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance

We offer Drum Type Goods Lift, which is made from high quality components. The Drum Type Goods Lift, offered by us, can bear weight from 5kg to 300kg. The Drum Type Goods Lift is used for carrying heavy documents or plates from one floor to another. These Drum Type Goods Lifts have extensive applications in hotels and restaurants, where frequent transportation of goods is required. Drum Type Goods Lifts are also used in hospitals and departmental stores to carry goods to various levels in the building. The Drum Type Goods Lifts, we offer can be of stainless steel or mild steel. The capacity of Drum Type Goods Lifts starts from 20 kgs onwards as desired. Only about 10" extra space is required in the building to fit this Drum Type Goods Lift, along with one wall to support the smaller ones. The entrance can be protected by either a swing window or vertical bipartite doors. Sizes : 1! 4 x 1V' to 3' x 3' or even larger as required Details

• Machine Room Height 'M' - 1200
• Pit Depth 'P1 - 750
• Pit created virtually above Bottom Floor FFL
• Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor
• All Sizes are inside finished dimensions in mm
• All Hoist-way walls are 150 mm thick Brick or RCC walls
• Dumbwaiter entrance bottom will be 750 mm above floor level
• Size will be 'A' mm wide x 100 + 'H' mm high inside clear
• Machine will rest on a Mid Level Slab or Steel section (in client's scope)