Post Buy Requirement
Matrix Industries
Mumbai, Maharashtra, India
gstGST : 27ABTPT9706G1ZW Verified Add Review

Other Products / Services #420311

Standing Seam Panels

We are listed amidst the emerging Suppliers of Standing Seam Panels and have been serving markets with the premium products. Placed in Maharashtra (India), we share space with the top-notch Suppliers, domestically and offer top-of the line array of in the market.

 

Thickness – 6 mm to 42 mm.

View Complete Details

Heavy Structural Fabrication

We Provide Heavy Structural Fabrication on Turnkey Basis, Matrix Industries - undertakes turnkey projects for Architectural Structures , Pre Engineering Structures ( PEB) , Space Frames , Roofing Structures for Colour Coated sheets , PUF Panels for Factories , Warehouses , Club Houses and many more design structures etc. TURNKEY SOLUTIONS COMPANY MATRIX INDUSTRIES has emerged as a turnkey solution provider anywhere in the country for Architects or Clients for its products. The company has a full fledged Design Department equipped with appropriate hardware and software to provide the complete solution and backup to the clients For all types for roofing solutions like Shingles , Roofing Tile etc. We do Industrial shades & other specialized roofing products. We are catering from the Mumbai , Pune , Nagpur , Aurangabad offices & the JV with lots dealer & new Applicators. We give free consultations for new immerging applicators for their roofing & structural projects

View Complete Details

Polycarbonate Profiles

  • Thickness 5/16”
A Polygal sheet is positioned on a roof and then screwed down. A Polycarbonate base profile is placed under the attached sheet; the next sheet is placed and screwed down. Then the Polycarbonate cap profile is snapped into the base profile (a rubber mallet can be used to snap the cap into the base; temporary support may be needed below the base). One screw should be placed through the cap and base to prevent movement due to thermal expansion and contraction. Always make sure to use original Polygal screws and gaskets to prevent leakage. For outdoor structures, it is recommended to use 38-58 thick sheets. For optimal performance in all applications, it is not recommended to use sheets of less than 516 thickness. Using the correct sheet thickness will prevent damage and ensure a long service life.
View Complete Details

Polycarbonate Structure

  • Size 16mm
Selectogal's sophisticated prismatic structure enables it to reflect most of the sun's heat in the summer, yet allows increased penetration of solar heat in the winter. Energy savings through effective heat screening, Rigid sheet structure provides extra strength under wind and snow loads. To see sheet performance under loads, go to Applications".
View Complete Details

Ms Pipes

Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers. The offered assortment of products is sternly checked, examined by the quality experts to maintain the set industrial standards. Our super durable MS pipes are available in various shapes like round, square, rectangle, hexagon, etc. 

View Complete Details

Colour Coated Metal Sheets

Its coated steel business manufactures and supplies 55% al-zn alloy coated zincalume® steel and pre-painted colorbond® steel for building and construction industry.

 

Detail : 0.35mm to 0.8mm in RAL colour.

View Complete Details

Primalite

In order to deliver quality content, our entire production process is commenced under the strict eyes of quality examiners. We have achieved great heights of success by providing top-notch array of Primalite. The offered Primalite is available in a size range of 8 mm to 42 mm in a Pinkish Reflection.

View Complete Details

Aluminium Glazing Profiles

  • depth 30 mm
Polygal's 6-35 Glazing System is a large-span clamping system specially developed for glazing applications using 6-35 mm thick Polycarbonate structured sheets. Sheets are mounted on the system's load-bearing elements during construction of transparent and semi-transparent roofing. The system's large rebate depth (30 mm overlap) makes sheet fastening easier, and prevents glazing failures due to wind and snow loads or thermal expansion.
View Complete Details

Polypropylene Roofing Sheets

  • Lightweight 1/6
Polygal's Polycarbonate sheets are designed for an endless range of glazing and roofing applications, for extreme weather conditions, and are known for their light-transmitting and reflective qualities. They are attractive, durable, easy to install and protect the people and property inside a structure from the elements and from damaging UV radiation. The Polycarbonate sheets are available in a wide range of models and technical specifications. Polygal's Polypropylene sheets are used for a wide variety of industrial applications, and are valued for their durability and resistence to chemicals and other damaging elements.
View Complete Details

Polycarbonate Plain Solid Compact

Ours is a well-established firm located in Maharashtra (India) and engaged in the business of providing a wide assortment of quality products. We are specialist in making available Polycarbonate Plain Solid Compact in a wide spectrum of grades and specifications. The offered Polycarbonate Plain Solid Compact is available in various thicknesses like 2mm, 4mm, 6mm etc.

 

Details : 0.5 mm to 12 mm.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Vivek Tantak (Matrix Industries)
  • 2103 Pannalal Compound , Bhandup Industrial Estate Bhandup W, Bhandup West, Mumbai, Maharashtra - 400078
  • Share us via
  • Call 08068051314 Ext. 498
List of Other Products by Matrix Industries from Mumbai, Maharashtra.
Post Buy Requirement
Matrix Industries
Mumbai, Maharashtra, India
gstGST : 27ABTPT9706G1ZW Verified Add Review

Other Products / Services #420311

Standing Seam Panels

We are listed amidst the emerging Suppliers of Standing Seam Panels and have been serving markets with the premium products. Placed in Maharashtra (India), we share space with the top-notch Suppliers, domestically and offer top-of the line array of in the market.

 

Thickness – 6 mm to 42 mm.

View Complete Details

Heavy Structural Fabrication

We Provide Heavy Structural Fabrication on Turnkey Basis, Matrix Industries - undertakes turnkey projects for Architectural Structures , Pre Engineering Structures ( PEB) , Space Frames , Roofing Structures for Colour Coated sheets , PUF Panels for Factories , Warehouses , Club Houses and many more design structures etc. TURNKEY SOLUTIONS COMPANY MATRIX INDUSTRIES has emerged as a turnkey solution provider anywhere in the country for Architects or Clients for its products. The company has a full fledged Design Department equipped with appropriate hardware and software to provide the complete solution and backup to the clients For all types for roofing solutions like Shingles , Roofing Tile etc. We do Industrial shades & other specialized roofing products. We are catering from the Mumbai , Pune , Nagpur , Aurangabad offices & the JV with lots dealer & new Applicators. We give free consultations for new immerging applicators for their roofing & structural projects

View Complete Details

Polycarbonate Profiles

  • Thickness 5/16”
A Polygal sheet is positioned on a roof and then screwed down. A Polycarbonate base profile is placed under the attached sheet; the next sheet is placed and screwed down. Then the Polycarbonate cap profile is snapped into the base profile (a rubber mallet can be used to snap the cap into the base; temporary support may be needed below the base). One screw should be placed through the cap and base to prevent movement due to thermal expansion and contraction. Always make sure to use original Polygal screws and gaskets to prevent leakage. For outdoor structures, it is recommended to use 38-58 thick sheets. For optimal performance in all applications, it is not recommended to use sheets of less than 516 thickness. Using the correct sheet thickness will prevent damage and ensure a long service life.
View Complete Details

Polycarbonate Structure

  • Size 16mm
Selectogal's sophisticated prismatic structure enables it to reflect most of the sun's heat in the summer, yet allows increased penetration of solar heat in the winter. Energy savings through effective heat screening, Rigid sheet structure provides extra strength under wind and snow loads. To see sheet performance under loads, go to Applications".
View Complete Details

Ms Pipes

Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers. The offered assortment of products is sternly checked, examined by the quality experts to maintain the set industrial standards. Our super durable MS pipes are available in various shapes like round, square, rectangle, hexagon, etc. 

View Complete Details

Colour Coated Metal Sheets

Its coated steel business manufactures and supplies 55% al-zn alloy coated zincalume® steel and pre-painted colorbond® steel for building and construction industry.

 

Detail : 0.35mm to 0.8mm in RAL colour.

View Complete Details

Primalite

In order to deliver quality content, our entire production process is commenced under the strict eyes of quality examiners. We have achieved great heights of success by providing top-notch array of Primalite. The offered Primalite is available in a size range of 8 mm to 42 mm in a Pinkish Reflection.

View Complete Details

Aluminium Glazing Profiles

  • depth 30 mm
Polygal's 6-35 Glazing System is a large-span clamping system specially developed for glazing applications using 6-35 mm thick Polycarbonate structured sheets. Sheets are mounted on the system's load-bearing elements during construction of transparent and semi-transparent roofing. The system's large rebate depth (30 mm overlap) makes sheet fastening easier, and prevents glazing failures due to wind and snow loads or thermal expansion.
View Complete Details

Polypropylene Roofing Sheets

  • Lightweight 1/6
Polygal's Polycarbonate sheets are designed for an endless range of glazing and roofing applications, for extreme weather conditions, and are known for their light-transmitting and reflective qualities. They are attractive, durable, easy to install and protect the people and property inside a structure from the elements and from damaging UV radiation. The Polycarbonate sheets are available in a wide range of models and technical specifications. Polygal's Polypropylene sheets are used for a wide variety of industrial applications, and are valued for their durability and resistence to chemicals and other damaging elements.
View Complete Details

Polycarbonate Plain Solid Compact

Ours is a well-established firm located in Maharashtra (India) and engaged in the business of providing a wide assortment of quality products. We are specialist in making available Polycarbonate Plain Solid Compact in a wide spectrum of grades and specifications. The offered Polycarbonate Plain Solid Compact is available in various thicknesses like 2mm, 4mm, 6mm etc.

 

Details : 0.5 mm to 12 mm.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Vivek Tantak (Matrix Industries)
  • 2103 Pannalal Compound , Bhandup Industrial Estate Bhandup W, Bhandup West, Mumbai, Maharashtra - 400078
  • Share us via
  • Call 08068051314 Ext. 498