The  Bio medical Waste  means; soiled or blood-soaked bandages, discarded surgical gloves after surgery, IV sets, Urine Bags, Aprons, injections, Syringes, needles, culture dishes and other glassware, discarded surgical instruments scalpels, sharps and needles used to give shots or draw blood, cultures, stocks, little blades, swabs used to inoculate cultures, removed body organs like tonsils, appendices, limbs, etc. Discarding of  Bio medical Waste  is a must as it is one of the dangerous  wastes  for human life. The Discarding of this type of  waste  is only possible with the correct  incinerator . Bio Medical Waste Incinerators  are built to meet the need of our customers to improve the pollution in the environment by  solid waste  and many other waste products.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat  waste  which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerator  bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our  incinerators  are operated by PLC controlled system to ensure failsafe and error free operation.   SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases. SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

Municipal Waste Incinerator  is a  waste treatment  technology that involves the combustion of waste at high temperatures. Incineration and other high temperature waste treatments are described as "thermal treatment". In effect, incineration of waste materials converts the waste into heat (that can be used to generate electricity), sends gaseous emissions to the atmosphere, and makes residual ash.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat waste which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerato r bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our incinerators are operated by PLC controlled system to ensure failsafe and error free operation.   SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases. SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

Suitable for the  Hazardous  area classifications Zone1, Zone2, Gas Group IIA, IIB, IIC. Hazardous waste  means any liquid, gaseous, solid or waste substance, or a combination thereof, resulting from any process of industry, manufacturing or business or from the development or recovery of any natural resources, that may cause or might reasonably be expected to cause pollution.  Hazardous wastes  consist of complex mixtures of a large variety of compounds. Its Discarding / incineration needs careful and thorough analysis for safe disposal.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat waste which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerator  bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our incinerators are operated by PLC controlled system to ensure failsafe and error free operation. SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases.   SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

counted amongst the leading entities of this domain, we are affianced in offering manufacturing, supplying, and exporting sewage treatment plant. The plant is used in treating the domestic sewage and related organic sewage. This plant can be installed in hotel, restaurant, sanatorium, hospital, school, residence community, villa district, village, town, station, airport, seaport and dock. We design and manufacture the plant using quality material and innovative techniques that help the plant last for thirty years easily. Clients can get the plant installed from us at cost effective price.   salient features  easy operation  automatic control  can be buried under the ground  convenient maintenance

The Bio medical Waste means; soiled or blood-soaked bandages, discarded surgical gloves after surgery, IV sets, Urine Bags, Aprons, injections, Syringes, needles, culture dishes and other glassware, discarded surgical instruments scalpels, sharps and needles used to give shots or draw blood, cultures, stocks, little blades, swabs used to inoculate cultures, removed body organs like tonsils, appendices, limbs, etc.

The  Bio medical Waste  means; soiled or blood-soaked bandages, discarded surgical gloves after surgery, IV sets, Urine Bags, Aprons, injections, Syringes, needles, culture dishes and other glassware, discarded surgical instruments scalpels, sharps and needles used to give shots or draw blood, cultures, stocks, little blades, swabs used to inoculate cultures, removed body organs like tonsils, appendices, limbs, etc. Discarding of  Bio medical Waste  is a must as it is one of the dangerous  wastes  for human life. The Discarding of this type of  waste  is only possible with the correct  incinerator . Bio Medical Waste Incinerators  are built to meet the need of our customers to improve the pollution in the environment by  solid waste  and many other waste products.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat  waste  which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerator  bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our  incinerators  are operated by PLC controlled system to ensure failsafe and error free operation.   SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases. SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

Municipal Waste Incinerator  is a  waste treatment  technology that involves the combustion of waste at high temperatures. Incineration and other high temperature waste treatments are described as "thermal treatment". In effect, incineration of waste materials converts the waste into heat (that can be used to generate electricity), sends gaseous emissions to the atmosphere, and makes residual ash.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat waste which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerato r bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our incinerators are operated by PLC controlled system to ensure failsafe and error free operation.   SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases. SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

Suitable for the  Hazardous  area classifications Zone1, Zone2, Gas Group IIA, IIB, IIC. Hazardous waste  means any liquid, gaseous, solid or waste substance, or a combination thereof, resulting from any process of industry, manufacturing or business or from the development or recovery of any natural resources, that may cause or might reasonably be expected to cause pollution.  Hazardous wastes  consist of complex mixtures of a large variety of compounds. Its Discarding / incineration needs careful and thorough analysis for safe disposal.   Waste management  has become a major concern worldwide and incineration is now being increasingly used to treat waste which cannot be economically recycled or treated. Incineration is a  waste treatment technology  that involves the combustion of organic materials. Incineration of waste materials converts waste into  Incinerator  bottom ash, flue gas, particulates and heat. The flue gases are cleaned before dispersing in the atmosphere. Maximus Envirotech offers incineration solutions for wide range of waste. Our wide experience & exhaustive analysis of the problems helps in providing right type of solutions for different types of waste. Our  incinerators  are state of the art units specially designed considering physical & chemical properties of wastes. Our incinerators are operated by PLC controlled system to ensure failsafe and error free operation. SALIENT FEATURES  Incineration system Built in with 100% compliance to the requirement of Environmental rules of India as well as International Norms.  Incineration system with two distinct furnaces i.e primary furnace & secondary furnace with independent burner system.  Online monitoring system for monitoring different parameters in flue gases like CO, CO2, HCl, NOx, SO2 and many more as per the requirement.  Automatic Feeding of Solid & Liquid Waste into the primary Furnace.  Operates on variety of Auxiliary Fuels like Furnace Oil, LDO, HSD, Natural Gas.  Automatic function operation using PLC and SCADA system for optimum operation.  Heat Recovery systems for utilization of waste heat from flue gases.   SAFETY INTERLOCKS  Automatic On/OFF of Fuel Burners corresponding to Low & High Temperature of Furnace.  Automatic shutdown of entire system in case of tripping of ID fan or Recirculation Pump.  No Waste loading unless temperature of Primary & secondary Furnace reaches desired temperatures.  Realtime temperature logs and recording of alarms and other incidences to know the exact mode of operation.  Venting of Exhaust gases from primary & secondary furnace in case of power failures or emergency shutdowns to prevent any accident or damage to the system.

counted amongst the leading entities of this domain, we are affianced in offering manufacturing, supplying, and exporting sewage treatment plant. The plant is used in treating the domestic sewage and related organic sewage. This plant can be installed in hotel, restaurant, sanatorium, hospital, school, residence community, villa district, village, town, station, airport, seaport and dock. We design and manufacture the plant using quality material and innovative techniques that help the plant last for thirty years easily. Clients can get the plant installed from us at cost effective price.   salient features  easy operation  automatic control  can be buried under the ground  convenient maintenance

The Bio medical Waste means; soiled or blood-soaked bandages, discarded surgical gloves after surgery, IV sets, Urine Bags, Aprons, injections, Syringes, needles, culture dishes and other glassware, discarded surgical instruments scalpels, sharps and needles used to give shots or draw blood, cultures, stocks, little blades, swabs used to inoculate cultures, removed body organs like tonsils, appendices, limbs, etc.