Our Products
Our offered Product range includes Moveable Sieve Jig and BATACJIG.
ROMJIGspecifically developed for treating ROM coal for deshaling purposes. Earlier jigs were incapable of deshaling without crushing the ROM coal to a size less than 150 mm which incurred extra costs. But with the development and introduction of the ROMJIG this limitation was done away with and ROM coal with sizes upto400 mmcould be directly Deshaled with this machine without crushing. This method also thus helps in protecting the subsequent comminution system. This machine is a movable bed screen with excellent separation efficiencies and robust design. It is highlighted by advantages such as absence of hutch water clarification, low water and energy demands and small number of ancillary equipments. Therefore, it outrivals any other method of mechanical refuse separation.
This propriety machine of MBE caters to all kinds of coal, minerals etc. of varying coarse, medium and fine sizes. BATAC jigs are underpulsated which effects in higher separation efficiencies than BAUM jigs and higher throughput rates than BAUM alongwith lesser footprint and lesser corner effect.
Salient features of BATAC Jig include:A centre air chamber for each compartment for stable operation and uniform stroke distribution
Permanent and adjustable air pockets guarantying fast and hassle free startup
PLC based jig controllers
Independent working discharge devices with separate hydraulic systems which ensures optimal product qualities over the entire jig bed even when feed distribution is non-uniform
Ultrasonic sensor technology for highest discharge precision
Highest throughput rates available in the market
Technologically superior pulse generators
Water Only Process
Operating cut points from 1.3 to 7.85
High Throughput Rates
Lump Ores : 75 90 tph/m jig width
Fine Ores : 68 78 tph/m jig width
Compact Design, up to 7m in width
1 or 2 cut points in one machine possible
Handle up to 20% feed and water variations
Can be stopped instantaneously and restarted immediately
Adjustments done from the control room for all Jig functions
Inter Operable with all established process automation system
No mechanical adjustments on jig drive required
| BATAC® Jig features | 8.0 m | 6.0 m |
| Maximum Jig bed width | 960 tph (for coarse) | 500 tph (for coarse) |
| Maximum throughput | 850 tph (for fine) | 450 tph (for fine) |
| Size Range | 150 – 10 mm (for coarse) 10/12 – 0.5 mm (for fine) |
45 – 6 mm (for coarse) 10 - 0.315mm (for fine) |
Susant Sutar (Mbe Coal & Mineral Technology India Pvt. Ltd.)
Ecospace Campus – 2B, 6th floor Plot No. 11F/ 12, New Town, Rajarhat, North 24 Pgs., Kolkata – 700156., West Bengal, India
Share us via
Write a Review
