ASSOCIATED CRIB EQUIPMENTS

Waghbil, Thane, Maharashtra

This is the most advance type of fixture which takes extra care of its tool holder. Fixture body is made from steel, powder coated. Both adaptors are made from anodised aluminium for extra safety of the tool holder.

This is the basic design fixture made from powder coated steel with alloy steel toughened and ground adaptor. This fixture is most suitable for them who needs to change only the cutter

This cabinet is designed to store various items like tools, cutters, measuring instruments, gauges, clamping elements etc. Each drawers have adjustable types of partitions which ensure that space can be made as required and also non-mixing of stored items. Overall size of this cabinet 660W x 700D x 1025H. Usable drawer size is 550W x 550D. Load bearing capacity of each drawer is 100Kgs. with 85% extension. The cabinet have inbuilt anti tilting mechanism and provision for levelling lug.

SLOTTED ANGLE RACK

This is a heavy duty rack to sustain high capacity loads. These are made from heavy gauge material. Shelf height can be adjusted through slots provided in the vertical member. There are 4 shelves in standard. Height of the rack is 2000 mm, length 1000 mm and depth 450 mm.

HEAVY DUTY RACKING

This is a height adjustable type shelve for high capacity storage. Even pallets can be stored in this rack. The overall size is 2400 W x 600D x 2400H. Provision of extending the common pillar to double, and even triple the size is available. There are 4 shelves with 25 mm plywood or metal dock given on top with an adequate support.

A 3 drawer cabinet provided in one side below the 38 mm thick table top. The table is supported by 4 legs. Overall cabinet dimension is 510W x 700D x 375H and The overall table dimension is 800D x 835H + Levelling.with mounting legs are provided at bottom. Length suit to the model. Usable drawer size is 400W  500D fully extendable of height 100x3 The drawers are provided with suitabl partitions. The load bearing capacity of each drawer is 100 Kgs.

This is the most economical model to keep few number of tool holders. This should be nailed on the wall at a suitable height. Tool holders are kept in moulded ABS plastic pockets to avoid metal to metal contact. Overall dimensions are 755L x 135D x 225H.

This is most preferably the economical way to store large number of tool holders. The frame is made out of a tubular section by optimising the utilisation of floor space. Overall size is 875W x 450D x 1525H. Tool holders are kept in moulded ABS plastic pockets to avoid metal to metal contact.

This fixture has been designed for those who have both BT and HSK series of tool holders. This fixture holds the tool holders on the non-functional diameter, this ensures that the chances of damage of the taper portion is minimal. This also ensures firm grip and no slippage during tightening. An alloy steel toughened adaptor is placed in a steel body which can swing up to 90 degree.

This fixture has been specifically designed for those who have both BT and HSK series of tool holders. It holds the tool holder on a non-functional diameter, which ensures that the chances of damage to the tapered portion are minimum. This also prevents slippage during tightening. An alloy steel toughened adaptor is placed in a steel body.

This fixture is designed for those who needs frequent change of tool and pull stud. This is the most rigid design. Fixture is made of steel body with two alloy steel toughened and ground adaptors positioned vertically and horizontally.