Our Products
Orthopedic Equipment & Supplies
2 Products availableMedical Ventilators
2 Products availableIndustrial & Engineering Products
1 Products availableMedical Equipment & Supplies
1 Products availablePVC, PP & Plastic Products
1 Products availableAir Compressor
1 Products availableOur Complete range of products are Bubble CPAP Stand, Reservoir Bag, Bubble CPAP System Kit, Breathing Circuit Set for Neonatal and Neonatal Breathing Circuit Set.
Features :
Technical Details
| Pneumatic Data | |
| Maximum Output Pressure: | 4 bar (standard ventilator setting). |
| Maximum Output Flow: | 90 I/min, continuous at 4 bar. |
| Particulate filtration: | 99% of 5 micron or larger particulate removed. |
| Moisture separation: | Dryer cylinder used along with solenoid valve and microprocessor. |
| Dew Point Depression: | 3.3 `C below room temperature at maximum output. |
| Storage | |
| Atmospheric Pressure: | 780hPa < p < 1060hPa. |
| Physical Data | |
| Air outlet connector: | 3/4 "- 16 UNF (DISS) or DIN 13254 back side. |
| Dimensions in inches: | 16W X 14H X 16D (without Caster) caster size 3 inch. |
| Noise: | Below 45dbA at 1 m distance. |
| Filtration: | Air filter 5 microns. |
| Weight: | 25Kg. |
| Electrical Data | |
| Power cord: | 2 Mtr. |
| Power protection: | M.C.B. used. |
| Power requirements: | 230VAC +10% or -10% 50Hz. |
| Power consumption: | single phase, 600watts. |
| Indicators & switches | |
| Main switch: | Electronic soft touch with LCD indication . |
| System fail: | /p>Dialogue written on LCD Screen. |
| Stand By: | Dialogue written on LCD Screen. |
| Performance gauge: | Provided on front panel. |
| Temperature alarm: | Dialogue written on LCD Screen (optional). |
| Used time indicator: | Mechanical hour meter used. |
| Nebulizer port: | (optional). |
| Environmental Data | |
| Ambient Operating Temperature: | 10 c to 45 c Humidity below 90%1c to 60 c. |
Features:
Accessory:
dedicated neonatal ventilator with
invasive , noninvasive, bubble cpap , mask mode mode
user frendly
.Additional Information:
Payment Terms : L/C, T/T
Packaging Details : set includes
main control unit + spacial air compressor+humidifier+stand + support arm+ accessory
Delivery Time : 7 days
Features:
Simplicity of settings:
Ventilation ratio monitoring:
Compact size:The size of servovent neo is designed to be compact and can be installed in minimum possible place.
Durability:
Servo mechanism:
Online gas source monitoring on front panel:
High flow inspiratory gas advantages:
Autoclavable expiratory valve:
Fio2 monitoring on front panel:
High pressure gas blender:
Technical Details
| Ventilation Mode: | CMV / SIMV / CPAP |
|---|---|
| Inspiratory Time: | 100 to 300 milli sec. |
| CPAP/PEEP Pressure: | 0 to 15 CmH2O |
| Inspiratory Pressure: | 5 to 60 CmH2O |
| FiO2: | 21% to 100 |
| BPM: | 1 to 150 |
| I:E Ratio: | 11.2:1 to 1:600 |
| Pressure Monitor Real-time Pressure Measurement: | Resolution 1CmH2O |
| Sampling Time: | 2 ms |
| FiO2: | 21% to 100 |
| Peak Pressure: | 0 to 80 CmH2O / Resolution 1 CmH2O |
| PEEP Pressure | 0 to 20 CmH2O |
| User Settable Alarms: | - |
| High Pressure Range: | 5 to 90 CmH2O |
| Low Pressure Range | 0 to 20 CmH2O |
| System Alarms: | |
| Low Air Supply: | Value Also Displayed On Screen. |
| High Air Supply: | Value Also Displayed On Screen. |
| Low O2 Supply: | Value Also Displayed On Screen. |
| High O2 Supply: | Value Also Displayed On Screen. |
| Cycle fail in all methods: | - |
| Low FiO2, High FiO2: | - |
| Apnea Time: | Only active in CPAP mode |
| Power requirments | |
| Voltage: | 100-250 V / 50-60 Hz. |
| Power: | 50W |
| Battery Back-Up: | 45-60 minutes(Dependent on mode of opration). |
| Battery Charging: | Full Charge 24 hours, 80% charge after 8 hour. |
| Air and O2 Input Pressure: | 3-5 Bar |
| Fresh Gas Flow: | 12 liters/min |
| Maximum Gas Flow: | 20 liters/min. |
| Dimensions Size: | 28cm W x 30cm H x 28cm D(Only ventilatior). |
| Height On Stand: | 120cm |
| Weight Ventilatior Only: | 13 kg. |