Medilivescare Manufacturing Private Limited

Mohan Nagar, Ghaziabad, Uttar Pradesh

Frame work made of Rectangular M.S Tube4 section top made of perforated M.S sheet.Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions maneuvered by separate.ABS molded head and foot bows.Collapsiblesafety side Railing.Telescopic IV Rod with fourlocations.Bed Mounted on 125 mm Dia Castor two with brakes.Overall Size: 2100 L x 900W x 600 -800H mmFinish: Epoxy Powder Coated

Overall Approx. size: 1680Hx 2450 mm.

MS tubular construction made of 19mm x 18G in four section.

Legs made of 25mm x 18G fitted with 50mm dia castors.

Each panel is 610mm vide.

Supplied with hooks and spring with curtain cloth.

Finish: pre treated and epoxy powder coated.

Screen panel size: (160Hx60L cm)

Curtain size: (140Hx 60L cm).

M.S steel tubular frame work mounted on 50mm castors with curtains.

Curtains available in different colors. (white, green, blue)

Easy assemble & dissemble or storage.

Pre treated & epoxy coated.

Box size : 43cm (17") x 28cm (11") x H - 33cm (13").Locker made from machine pressed CRC MS sheets.With one box.Pressed top with raised edges.MS Material in expoxy powder coated finish.

Size: 18"x9"x9".

M.S. Tubular legs fitted with PVC stump.

Pre treated and epoxy powder coated.

M.S top.

Also available in stainless steel model.

Made of Mild Steel with epoxy powder coated finish.

Dims: 1830 x 760 x 400mm (LxWxH).

With support for mattress at four corners.

With rubber stumps.

Mild Steel made.

Overall Dims.: 2160 x 960 x 600mm (LxWxH)

Frame is made of rectangular Mild Steel / CRC sheet. Back rest section maneuvered by separate screws from foot end.

Stainless Steel 32mm mounted head and foot bows.

Side railing can be provided.

Provision for IV Rod.

Supplied with four 125mm dia castors, two with brakes.

Epoxy powder coated finish.

Overall Size: 1860 x 510 x 760mm (LxWxH).

Frame work is made of 32x 32mm square pipe.

Legs are made of 32mm round pipe fitted with rubber stumps.

Adjustable back rest by hand lever.

Epoxy powder coated finish.

-Frame work made of Rectangular M.S Tube-MS Mattress platform in four sections-Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operator by hand remote system-ABS molded head and foot bows-ABS tuck away safety side Railing-Telescopic IV Rod with Two Locations-Bed Mounted on 125 mm dia Castor, two with brakes-Nurse control panel-CPR system-Overall Size: 210 L x 90W x 50 -70Hcms-Finish: Epoxy Powder Coated

Optional:

-Central locking system also available-Chair position is also available

Tubular Mild Steel frame work, epoxy powder coated, mounted on 50mm dia castors.

S. S. Top : 760 x 410mm.

Size: 1070 L x 410 W x 990H mm.

Fixed upholstered top.Headrest adjustable byratchet system.Upper section frame made from heavy M.S. sheet & pipes.B.P. apparatus tray provided near headrest.With three drawers.50mm thick reversible foam mattress.With unbreakable shoes for legs.All pipes and sheets are made epoxy powder coated steel.

Overall Size: 1860 x 510 x 760mm (LxWxH).

Frame work is made of 32x 32mm square pipe.

Legs are made of 32mm round pipe fitted with rubber stumps.

Adjustable back rest by hand lever.

Material: Stainless Steel.

Electrically controlled, multi function, variable height couch has been designed to meet the ever growing needs of the busy practice. This new design has evolved from extensive user group feedback.

Size: Width: 600 mm - Length 1830 mm - Height 560-1000 mm

Features:-

Variable heightElectric hand-set controlAdjustable back rest section through ratchet systemSwivel castors two with brakes, for ease of manoeuvrability and safetyComfortable Upholster water proof foam surfaceFibber covered base

Optional Accessories:-

Safety side railing

• 10cms thick, 32/40 density foam mattress covered with rexine closed with zip at one side.

Following Mattresses are available:

• Type 1 : For Plain hospital beds/ attendent beds.
• Type2 : For Semi-fowler hospital beds.
• Type3 : For Fowler/ I.C.U beds.

Frame work made of Rectangular M.S Tube.4 section top made of perforated M.S sheet.Back Rest, Knee Rest, TB/RTB positions manoeuvred by separate screw from foot end.ABS molded head and foot panels.Height adjustment with hydraulic foot pump.Collapsible aluminium safety side railings.SS IV rod with four locations.Bed Mounted on 150mm Dia Castor (2 with brakes).Overall Size: 2150 L x 1050W x 460 -750H cms.Finish: Epoxy Powder Coated

Frame work made of Rectangular M.S Tube perforated CRC sheet top in four sections.Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operator by hand remote system.ABS molded head and foot bowsAluminum collapsible safety side railing.Telescopic IV Rod with fourlocations.Bed Mounted on 125 mm Dia Castor two with brakesProvided with 100mm. mattress in 40 density.Overall Size: 210 L x 90W x 60 -80H cm.Finish: Epoxy Powder Coated

Frame work made of Rectangular M.S Tube.4 section top made of perforated M.S sheet.Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions maneuvered by separate screw.S.Shead and foot bows.Collapsible railing (aluminium or iron or stainless steel).Telescopic IV Rod with fourlocations.Bed Mounted on 125 mm Dia Castor two with brakes.Overall Size: 2100 L x 900W x 600 -800H mmFinish: Epoxy Powder Coated

Upholstered top upper section with three drawers adjustable upholstered back rest.

Lower section with lockable slide door cabinet swinging tray B.P Appartus.

Chemically pre treated and epoxy powder coated/ oven baked enamelled backrest.

Size 1890x510x820 (LxWxH mm)

Platform size: 450x610 (LxW mm)

Overall approx size: 213Lx56Wx81H cms.

Frame work made of 1.25" 16G vetical and 1"x18G horizontal CRC tube.

Trolley mounted on 15cm dia castors 2 with brake.

Removable stretcher top with MS sheet.

Pushing handle at both end of the stretcher top.

Finish: Pre treated and epoxy powder coated.

Also available in complete S.S.

Main frame is made of rectangular MS/CRC sheet 25 x 50mm.

MS/CRC sheet top.

Tubular head and foot bows on rubber stumps.

Epoxy powder coated finish.

Approx., dimensions 72 (L) x 27 (W) x 30 (H)

Tubular frame work made in two section.

Body section with legs mounted on PVC stumps.

Leg section on swivel castors with brakes.

Two section cushioned top.

Height adjustable a pair of knee crutches.

Pre-treated & epoxy coated.

Fowler bed made of high quality materials, components and accessories.Four section sheet metal top.With adjustable back section and knee-rest.Manually operated crank system for various postions.Standard: SS panels, sheet metal platform.High quality castors, two with brakes.Standard dimension: bed frame 2030Lx 900Wx 600H mmPre treated and powder coated fowler bed.

Approx. size: 195Lx65Wx68-90H cms.

Frame work made of MS tubes / S.S.

Safety side railing I.V. rod.

Backrest adjustable.

15 cms dia castors.

Pre treated & epoxy powder coated or stainless steel made as per customer choice.

Made of Stainless steel.

Overall size : 1900 x 900 x 600mm (LxWxH).

Main frame made of rectangular Stainless Steel pipe 25mm x 50mm.

Stainless Steel top with tubular head and foot bows on rubber stumps.

Legs made of SS pipes.With shoes for legs.Waste collecting SS bowl provided; rest on bracket made of SS rod.Made of Stainless Steel.

Also available in mild steel with epoxy powder coated finish.

Size: - 182 cm (72") x - 84cm (33") x H - 56cm (22")Mainframe is made from M.S. rectangular tubes, which makes bed sturdy.Three-section top made from 1.22mm (18 SWG) sheetsuniformly perforated suitably fitted to the top.I. V. location and urine bag hook provided.Backrest maneuvered by auto ratchet arrangement, which consist on of 12mm dia. rod system.Bows, legs made from 1.25 dia x 1.22mm (18 SWG) Pipes.With unbreakable shoes for legs.Pre-treated in seven tanks chemical process & epoxy powder coated, which makes the uncorrosive.

hospital bed has following optional accesoories

• I.V. Bar Fix Height All Stainless Steel.
• I. V. Bar Height Adjustable All Stainless Steel.
• Mattress For Ratchet / Backrest Bed.

Overall Size: 1880L x 900W x 600-800H mm.

Tubular Frame work mounted on 125 mm dia castor two with brakes.

Three Section top made of MS pipe with fixed Cushioned mattress.

Trendlenburg / Reverse Trendlenburg Positions, Back section adjustment through manually.

Height adjustment through Hydraulic Pump.

Leg end section can slide under the main section.

Provided with a pair of upholstery lithonomy position.

SS telescopic IV Rod

Detachable SS Tray

Frame work made of rectangular square M.S. tube.Top made of perforated CRCA MS sheet.Tubular head & foot bows of unequal height.Four location for I.V rod.Overall size: 206Lx90Wx60H cms.Finish: Epoxy powder coated.

Back rest postion can be adjusted by a crank.Hi-low position can be adjusted by a high quality hydraulic jack.S.S swing away safety side railing.150mm diameter castors, with directional positions locks.Capability of attaching IV stand.Finishing treatment: pre-treated powder coating.Bumpers at four corners.Paper holder roller mount on head side.Polyurethane rebound foam mattress with water proof cover.

Dimensions:-

Overall: 1900Lx830W mmMattress platform: 183Lx720W mmHi low: 590-1020mmBack rest angle: 75Bed weight : 70 KgSafe working load: 180 KgCastors: 200mm dia.

Size: 137 cm (54") x 76 cm (30") x H - 56cm (22")The main frame made from M.S. rectangular tubes.Two-section top made from mild steel sheetsuniformly perforated.I. V. Location and urine bag hook provided.Bows, legs made from MS pipes.Drop down type side railing.With unbreakable shoes for legs.Pre-treated epoxy powder coated steel.

• I.V. Rod made of S.S.
• Mattress.

Size(in L x W x H): L - 41cm (15") x W - 30cm (12").

Made from epoxy powder coated steel on castors.

Hospital fowler beds made of high quality materials, components and accessories.With four sections sheet metal top.With adjustable back section and knee rest.Manually operated crank system for various positions.High quality cators, two with brakes.Standard dimension: bed frame 2030Lx 900Wx 600H mmPre treated and powder coated.

Frame work made of Rectangular M.S Tube.Back Rest &Knee Rest positions obtainded by electric actuator operator by hand remote system.ABS moulded head and foot bows.ABS moulded safety side railings or collapsible railing.Perforated CRCA sheet top in four sections.Telescopic IV Rod with fourlocations.Bed Mounted on 100mm deluxecastors, two with brakes.Overall Size: 2030 L x 900W x 600H mmPre treated & epoxy powder coated finish.

Made of Stainless Steel.

Size: 610x460x810mm (LxWxH)

2 Stainless Steel Shelves with 3 side railing on top.

With push/pull handle.

With bowl and bucket.

Mounted on 125mm dia castors, two with brakes.

Frame work made of Rectangular M.S Tube

MS Mattress platform in four sections

Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operator by hand remote system

ABS molded head and foot bowsABS tuck away safety side RailingTelescopic IV Rod with Two LocationsBed Mounted on 125 mm Dia Castor with two braking wheels.Overall Size: 210 L x 90W x 50 -70HcmsFinish: Epoxy Powder Coated

Optional:

Central locking system also availableNurse control panelCPR system

This stretcher is mainly for children which is a little shorter than normal one.

Made of high strength aluminum alloy materials.

A separately type stretcher to transfer fractured and serious patients.

It comes with two patient restraining quick release straps.

A hinged and joined arrangement, which is easy to set the stretcher into two parts.

Can be taken out from the back of the patient without moving the patient.

The length of stretcher can be adjusted according to patients' body.

Light weighted, small sized, easy carried, use safely and easy for sterilization and clean.

Material:- Special composite plastic

Color:- orange(normal color), military green(customized color)

Product unfolding size: 180x44x6cm

Product folding size: 90x44x9cm

Loading capacity: 160kgs

Size: 18"x18"x18".

M.S Tubular frame fitted with PVC stump.

CRC sheet duly double press bent.

Pre treated and epoxy powder coated.

Also available in stainless steel model.

S.S.tubular frame mounted on 10 cms dia castors.

Three shelves made of S.S.

A canvas bag fitted on one side.

Also, available in epoxy powder coated finish.

M.S. base.

Light weight and easy to move from one place to another location.Easy adjustments of height by Stainless steel saline rod.height adjustable with locking system.MSMaterial made in epoxy powder coated finish.

Overall size: W 410mm X D 370mm X H 900mm

Machine pressed CRCA sheet enclosed on three sides.

Fitted with 50mm dia castors.

Epoxy powder coated.

Overall Size: 1880L x 900W x 600-800H mm.

Tubular Frame work mounted on 125 mm dia castor two with brakes.

Three Section top made of MS pipe with fixed Cushioned mattress.

Height adjustment, back section & trendlenburg/ reverse tendlenburg postions adjustment through electric actuator system.

Leg end section can slide under the main section.

Provided with a pair of upholstery lithonomy position.

SS telescopic IV Rod

Detachable SS Tray.

Product Information

Overall approx. max. size: 72x27x30.Frame work made of MS tube.Legs fitted with PVC stumps.3 Section top made of S.S sheet.Back rest section adjustable on ratchet.Leg end section can slide under the main section.The entire table top gives trendlengberg positions by gas entire system.Removable safety side railing are provided on 3 sides of the table.Height adjustable a pair of foam padded knee crutches.Patient bearing down hand grips made of S.S. tubes.Supplied with waste collecting S.S bowl on S.S bracket and one S.S.I.V Rod.Finish: Pre treated and Epoxy powder coated.Also available in S.S frame work and S.S. top.

Trolley made of mild steel tubes, epoxy powder coated finish.

With two S.S. shelves, S.S. side rails to cover three sides of top shelf & four of bottom.

Mounted on four 7.5 cm swivel castors, two with brakes.

Provided with S.S. bowl & bucket.

Size: 610x460x810mm (LxWxH)

Approx. dimensions: 72Lx27Wx24-32HTubular frame work mounted on swivelling castors.Stainless steel top in three sections.Trendlenburg positions adjustable by pneumatic gas spring system.Hydraulically height adjustable by foot paddle from side.Backrest section adjustable on ratchet.Leg end section can slide under the main section.A pair of knee crutches with height adjustable.Finish: pre treated & epoxy powder coated.

Approx. size :210Lx65Wx65-95H cms.Safety side railing, I.V. Rod, storage tray & cylinder cage.Removable X-ray translucent top with tray for holding X-ray cassettes.Adjustable height by hydraulic pump through foot pedal.Trendlenburg/ rev. trenlenburg by gas spring.15 cms dia castors.Corner buffers.Pre treated and epoxy powder coated.