Wire Making Machines #5427010

Straight Line Wire Drawing Machines were developed for straight or deflection free drawing of wire to provide better drawability lower frictional contact and lower operator interference.

Theoretically there is no limit as far as the wire material or wire diameter is concerned to be drawn on these machines. Meenakshi Wire Product has pioneered to indigenously develop the Straght-Line Wire Drawing Machine Technology in India. Presently the range available is capstan diameter 900mm, 750mm, 600mm, 550mm, 500mm, 460mm, 400mm and 300mm for inlet wire diameter 16mm down to 0.5mm. Line speeds upto 22 Mtrs / Sec.

These heavy Straiht Line Wire Drawing Machines provide remarkable drawing performance for Low, Medium and High Carbon Steel Wire, Stainless Steel Wire and special Alloy Steel Wire and Non-Ferrous Alloy Steel Wire.

This machine has a sensor roller between the drum and the next die such that the wire passes in contact with this roller. These rollers have sensors to detect the position of the arm and maintain tension on the wire by regulating speed of the drums. The drums of this machine are inclined to the vertical axis to effect fill on the drums. Principally this machine is best suited for thick wires.

Meenakshi Wire Products offers wide range of high speed state of the art study. O.T.O. B.B. Type Wire Drawing Machines. The construction of the machine is such that it can withstand rugged workshop conditions of Wire Drawing Plant and can guarantee the performance and accuracy with least maintenance. These O.T.O.B.B. Type Dry Wire Drawing Machine have wide field applications in Stainless Steel, High Carbon Steel, Alloy Steel, Mild Steel, Copper Wire Drawing. The wire is drawn through a die which is fitted in independant Die Box and is accumulated on the Block, and later being taken through the OTO Pulley to the next Die. BB Block is Twist Free Type Machine with Free Bobbin Block for accumulation and transfer to next block and is better for higher speed & better finish materials.

Salient features :

• 760/650/610/560/450/350/300mm Single / Multi Speed, Non-Slip, Block Type, Continuous Dry Wire Drawing Machines. Continues Type in Line Machine for Large Cross Sectional Reduction Inlet size up to 12mm.
• Wire Rods Combination with 'B.B.' Type Machines for High Speed Applications. AC fixed speed with Speed Change Gear Box or variable speed A C / D C Drive is offered Heavy Duty Worm and Worm Wheel type Fabricated Gear Boxes with Standard Greaves (RADICON) & NAW Gears.
• Combination of Heli-Worm or Bevel Helical Gear Reduction if required. Dry/Wet Lubricant Type Die Boxes with Optional Rotating Die and Motorized Soap Applicators Die Chamber with Forced Water Cooling Indirectly or Directly.
• Optional Pneumatic/Electro Magnetic, Brakes on Machines.
• Operator Consol provided on Independent Block or Common Floor Standing type Control Desk.
• Inching with Foot Operated Pedal Switch Reverse/Forward.
• Graded Cast Iron Drums with Chrome Carbide Hard Matrix at Drawing Portion. 1 Forced Water Cooled Drums for Longer Drum Life and Cooler Drawn Wire.
• Additionally Air Cooled Drums with specially Designed Uniform Cooling Air Jackets Wire Unloading Trough Stripper Blocks, Dead Block Coiler or Spooler.

Features :

• Mills Available in Single Stand, Two-Stand and Three-Stand Tandem.
• More Stands Can Also Be Added In Conjunction Turk Heads, Draw Blocks Etc.
• Custom Designed Tandem Line.
• Can Handle Inlet Diameters Up To Thousand of an Inch.
• Variable Speed.