1) Thin and soft aluminum foil offers best conformability to both irregular and curved surfaces.2) Works as a barrier for moisture / vapor.3)Aggressive acrylic pressure sensitive is designed to excellent quick stick and ultimate adhesion.4) Highly reflective surface makes this tape ideal for under hood.5) Can work effectively for heat reflective applications.6) Useful for sealing out dust and dirt for underground cable and duct sealing applications, wire harness applications and spreading heat in flexible heaters.7) Few grades of these tapes can be used in electromagnetic and radio frequency shielding on microwave components, cables, antennas, motors, or cabinets.8) Offers temperature range from -40oF to 180oC.9) Aluminum foil tapes coated with silicone adhesive can withstand temperature as high as 320oC.10) Few grades of these tapes are available with liners which allow the tape to be die cut into shapes.11) Tape can be made printable for label applications.

This tape is constructed using a tissue paper as carrier material coated with synthetic resin water adhesive on both sides.Eco-friendly Carrier, adhesive and liner can be converted into pulp again and reused.Suitable for very high speed splicing in paper process industries.Suitable for low and medium speed splicing in newspaper and heavy weight paper industries.Easy to tear of the excess paper.Also available in single sided adhesive coating.

Backing material available from 0.01mm thickness to 0.125mm thickness.Available with different dimensional strengths.Available in tensile strengths from 0.8kg/inch to 42 kg/inch.Provides excellent shear strength to ensure the proper splicing of material.

Normally used for mounting nylon / rubber / photopolymer printing plates to the cylinder in flexographic printing machines.Use of these tapes, flexo printing quality is enhanced.Reduced dot gain.Foam tape enables fine halftone printing.Higher peel adhesion to most common plates.Low tack on one side and higher tack on other side can be made available where higher tack can be applied on the plate side and lower tack on the cylinder side.

Foam tape with pressure sensitive adhesive coated on both sides.Available in different thicknesses as per requirement.Used in glazing / cladding applications.

Available in high strength carrier material backing material.Excellent adhesion provides strong bonding between the substrates.Available in transparent and, white shades.

No career.Cured adhesive coated on a release liner.When peeled off, liner gets removed leaving uniform adhesive coating on the surface.Provides excellent bonding strength on metals, foams, vinyl, plastics, wood, etc

Provides resistance to slip.Normally used in areas where chances of skidding / slipping is more.Also used to create friction surfaces.Used on staircase, bathrooms, sloppy areas, slippery surfaces, etc.

High strength career material ensures strong joining of carpets.High strength adhesive ensure strong bonding with the substrate.Available in hand-tearable quality for ease in application.

Compatible to irregular surfaces.Can be used indoors and outdoors.Can also be used to mount signages, nameplates, trims, electrical components, etc.Provides good strength.Different qualities available for different mounting weights.

Aggressive acrylic adhesion system provides excellent shear strength.Can be repositioned within short time of application.Can be used in exterior conditions up to six months.Available in transparent for flex meant for night illumination.Available in white for white outs.

Provides excellent short term protection.Protects surface of furniture from dust, scratches, UV.Protects surface during transportation.Protects surface during idle conditions when vehicle is not in use for short term durations.Available in transparent, black/white, black and white.Can be peeled off smoothly and immediately.Dont leave residue when peeled off.Available thickness varies from 40 microns to 120 microns.

High shear strength ensure strong holding of laminate with the surface.Specially formulated adhesive leaves no stains and residue.Peels off easily and in single piece.

No screws, No drilling, no studding, no nailing, no rusting.Holds mirror to base without screws.Saves time.Eliminates costly replacements.Absorbs vibrations.Resists humidity.Ease in apply.

Butyl Sealant Tapes are sealant tapes that are used for sealing application in metallic roofing, double glazing, etc. Basically this tape is a synthetic rubber strip sealant designed for double glazing, extruded mastic sealing strips in various industrial and construction applications. This tape is used to seal dust, water and air. It adheres to steel, aluminium, treated metals, wood, glass, zinc, epoxies and many king of plastics. Life of this tape post application can be more than ten years.

Available in craft paper / crepe paper backing.Used for separation, protection and tapping the terminals of electrical components like transformers, capacitors, etc.Provides adequate tensile strength.Adhesion property ensure no contamination on the terminals for long period of time

Fabricated by weaving on narrow fabrics looms in various thickness and weave density.Excellent di-electric properties.Chemical resistance.Good reinforcement to insulation varnishes.Protects against mechanical damages.

Highly conformable to both irregular and curved surfaces.Used for masking of electroplating, x-ray plates, chemical milling.Used for sealing of radioactive canisters and thermopane windows.Used for shielding radiation barrier.Used for decoration in simulated lead windows.Lead foil tapes with liner allows diecut.Aggressive Pressure Sensitive Adhesive is designed to offer excellent quick stick and ultimate adhesion.

Thin and conformable tape enabling masking of uneven surfaces.Wide operating temperature ranging from -270oC to +400oC.Removes cleanly without adhesive residue after exposure to heat.Coated with high performace silicone adhesive.High strength backing provides superior resistance to puncture and tear.Resistance to chemical attack.Used for high temperature masking.Used for protection of circuit board gold finger contacts during wave solder.Used for insulation on transformers, motors, and coils.Used for thermocoupling.Used in Fibre Optics Cables.Used in Solar Panels.

Protects carpet during demos, transportation, maintenance, etc.Specially formulated adhesive adhere well to fibrous surface of the carpet.Can be available in different thickness as per required durability.

Provides excellent short term protection.Protects surface of the car from dust, scratches, UV.Protects surface during transportation.Protects surface during idle conditions when vehicle is not in use for short term durations.Available in transparent, black/white, black and white.Can be peeled off smoothly and immediately.Dont leave residue when peeled off.Available thickness varies from 40 microns to 120 microns

Used in mirror mounting in wing mirrors.Strongly bonds the mirror with the rear surface to ensure resistance to contact driving vibrations, wind pressures, environmental factors, manual tampering, etc.

Used for peel off test to ensure proper dryness of paint coating / powder coating.Specially formulated adhesive that leaves no residue on the surface and peels off without breaking.Different qualities of tapes can be made available for different requirement of peel strengths

A specialized PVC tape with excellent flexibility.Single strip tape designed for fine detail two-tone paint stripping.Highly conformable.Highly curvable.No wrinkling, edge tearing.Suitable for narrow curve masking.Does not shrink on high temperatures.Resistant to water and many solvents.Results into precise sharp lines.

Masking Tapes is a pressure sensitive tape made of a thin and easy-to-tear paper or polyester base depending on application.The adhesive is the key element for its application. It allows tape to be easily removed from the surface without leaving residue or damaging the surface.Different qualities of masking tapes are available for different strengths and temperature applications.

Seals and bonds in one step.Virtually invisible fastening.Fast and Easy to use.Strongly Bonds dissimilar materials.Seals out water and dust.Used indoors and out.High temperature resistant.Solvent resistant.Eliminates screwing, riveting, welding, etc.Enhances reliable bonding.High Performance.Visco-elasticity of tape ensure better adhesion penetration into the surfaces and adheration to vibrations, thermal expansions.Provides sealing, cushioning and impact resistivity.

PTFE Tapes are normally used for thermal insulation application in cutting application in printing application.Offers low coefficient of friction.Heat Resistance.Anti-stick and release characteristics.Chemical resistance.Can be used for roller wrapping.Coated with Silicone adhesive on one side.Temperature resistance upto 260oC.Can be used in sealing of polymer film in FFS, impulse sealer, band sealer, bag making machines, etc.

Provides excellent short term protection.Protects surface of the appliances from dust, scratches, UV.Protects surface during transportation.Protects surface during idle conditions when vehicle is not in use for short term durations.Available in transparent, black/white, black and white.Can be peeled off smoothly and immediately.Dont leave residue when peeled off.Available thickness varies from 40 microns to 120 microns.

1)Copper Foil is highly conformable to both irregular and curved surfaces.2) Solderable surface allows fast and easy fabrication of parts.Copper foil tapes with liner allows the tape to be die cut into shapes.3) Used in electromagnetic and radio frequency shielding on microwave components, cables, antennas, motors, or cabinets.4) Solderable.5) Used in Printed Circuit Board repairs or prototypes.6) Used as a connector where mechanical connectors are not practical.

Medium duty tensilised polypropylene strapping tape with a natural rubber adhesive system.Specially designed tape for stain and adhesive transfer resistant.Used for temporary holding of doors, frames, glass, etc.