Our Products
Leading Manufacturer, Supplier & Retailer of Door Interlock System.
The door interlocking system is used to control the entry of a person to a secure area such as a clean room, research lab, etc. where dust or small particles may be a problem or security is of high concern. In its simplest form, the door interlocking is composed of 2 doors that are electrically interlocked in such a way that the doors cannot be opened simultaneously. Another example of Door Interlocking is Man trap.
The 4 Door Interlocking Terminal can handle up to 4 doors ( 8 IN/OUT switches ).
Thus logic can be built up around the number maximum number of doors ( 4 ) i.e. the manner in which they need to open or close. The Pass-through authorization is validated by a switch or the DIT can operate in a switch-less mode. Spectras DIT400 from the Enclava series caters to this requirement of 4 Door Interlocking.
| Advantages | |
| Easy to install and configure | |
| Switchless operation | |
| Cost saving | |
| Specifications: Hardware | ||
| CPU | 8 Bit Microcontroller running at 8 MHz | |
| Program Memory | 32 KBytes | |
| Communication | Serial RS232 ASCII | |
| Door Interface | 2 Switches & 2 DOTL per door | |
| Door Control | 1 Buzzer and 2 LED indicators per door | |
| Relay Interface | Relay outputs for lock : 3A @ 1 V DC | |
| Digital Inputs | 4 General Purpose Optically isolated digital inputs | |
| Digital Outputs | 2 General Purpose Relay Outputs | |
| Watchdog | Built-in watch dog supervisor | |
| Power | Less than 5 Watt | |
| Protection | Miniature Circuit Breaker (MCB) for over current protection | |
| Specifications: DIT800 | ||
| Controller | 8 Door / 16 Switches | |
| Supply requirement | 13.8 V DC / 5 Amp with battery charger, provision to connect 12 V / 7.2 AH Battery | |
| Weight | 5.14 Kg | |
| Dimensions | 36.2 cm (L) x 32.5 cm (W) x 8.3 cm (D) | |
| Specifications: DIT400 | ||
| Controller | 4 Door / 8 Switches | |
| Supply requirement | 13.8 V DC / 2.5 Amp with battery charger, provision to connect 12 V / 7.2 AH Battery | |
| Weight | 2.65 Kg | |
| Dimensions | 26.2 cm (L) x 23.0 cm (W) x 5.7 cm (D) | |
| Specifications: DIT200 | ||
| Controller | 2 Door / 4 Switches | |
| Supply requirement | 13.8 V DC / 2.5 Amp with battery charger, provision to connect 12 V / 7.2 AH Battery | |
| Weight | 2.65 Kg | |
| Dimensions | 26.2 cm (L) x 23.0 cm (W) x 5.7 cm (D) | |
| Applications areas | |
| Door Interlocking Control | |
Mumbai,