Delhi, India
Our Products
This device is used to cut off flow of petrol when the vehicle is running on gas mode. It is fitted between Petrol pump and the carburettor
| Use | Automotive (only Carburated Engines) |
|---|---|
| Kind of Fuel | Gasoline |
| Function | Close / Open of Gasoline flow |
| Body | Brass / MS |
| Work Pressure | 2 Bar |
| Passage Section | 12,6 mm2 (ø4 mm) |
| Electric Feeding | 12 V DC |
| Electric Power | 13 W |
| Dimensions | 87x64.5x63 mm |
| Weight | 0.22 Kg |
This device is used to cut off flow of LPG when the vehicle is running on Petrol mode. It is fitted between Tank and the Reducer .
| Material | Brass Forge Body |
|---|---|
| Max. Working Pressure | 30 Bar |
| Flow Capacity | 3.2 MM |
| Solenoid Voltage | 12 V DC |
| Inlet/Outlet Connection | M 10x1 for 6x1 Pipes |
| Filtering Capability | 10 Micron |
| Working Temperature | -20°C to +120°C |
| Coil Power Consumption | 13W |
| Dimensions | 64.5x49x101 mm |
| Weight | 0.45 Kg |
The purpose of CNG filling valves are to control and regulate the flow of high-pressure natural gas from the station to the tank. These valves open and shut accordingly in response to the gas pressure under strict safety standards.
| Dimensions | 80x34x76 mm |
|---|---|
| Max Working Pressure | 260 Bar |
| Max Working Temperature | -40°C to + 120°C |
| Weight | 0.45 Kg |
| Filling Unit type | New Zealand Standard |
| Dimension | 104x83x30 mm |
|---|---|
| Weight | 0.38 Kg |
| Analog Input | 2 No. |
| Digital Input | 4 No |
| Digital Output | 2 No. |
| Module | GPS : SIMCOM (SAM39EA) GSM : SIMCOM (SIM80C) |
It controls speed of the vehicle by regulating fuel flow to the engine based on the vehicle speed.
