Our Product / Services
We offer a complete product range of Mindware Smart Card Reader, Mindware Magnetic Card Reader, Smart Card Slave Reader and Mindware Proximity Card Reader
A card reader is a data input device that reads data from a card-shaped storage medium. The first were punched card readers, which read the paper or cardboard punched cards that were used during the first several decades of the computer industry to store information and programs for computer systems. Modern card readers are electronic devices that can read plastic cards embedded with either a barcode, magnetic strip, computer chip or another storage medium. A memory card reader is a device used for communication with a smart card or a memory card. A magnetic card reader is a device used to read magnetic stripe cards, such as credit cards. A business card reader is a device used to scan and electronically save printed business cards.
IBC - SCRH06 series desktop readers are smart modules without touching based on international standard agreement ISO14443A, ISO14443B and ISO15693., is equipped with high capability chip, processor, security and electric monitor. The reader can communicate with PC by means of interface. It is of high capability, anti-jamming, small size and good quality, which brings more convenience.
Application:
Identification
Access control, PC Access
Customizing cards
Library management
This is a simple three track magnetic card reader with serial output. This reader connects to your computer with a DB9 for serial and a PS/2 for power and outputs a 9600bps 8N1 ASCII serial stream. Plug the reader into a serial port (or USB to serial converter), swipe your frequent shopper card, and you?ll see the account number plain and unencrypted on the screen. We couldn?t find a card the reader couldn?t read. No drivers needed. No software needed. Just pure, wonderful serial.
A magnetic card is a rectangular plastic object (think credit/debit card) that contains either a magnetic object embedded within the card or a magnetic stripe on the exterior of the card. A magnetic card can store any form of digital data. The electronic devices designed to read stored information from a magnetic card do so by either swiping the card through a slot in the reading device or holding the card next to a magnetic card reader. About a hundred bytes of information can be stored on a magnetic card. The magnetic card reader is a microcontroller-based device and has been programmed for a specific application. That program simply reads the card in a forward direction in a simple data format or it can be complex enough to read the card in any direction with a corresponding encoding format.The reader also contains an oscillator section which is used to provide the clocks for the recovery section and for the enable/disable timers. The enable/disable counters provide initialization for the recovery section. The recovery section locks onto the data rate and recovers the individual data bits from the data stream.
We offer different types of slot readers that are used to read barcodes and magnetic strips. Our Magnetic card readers are very much functional in reading ID cards, membership cards, loyalty cards, credit cards etc. These slot readers can be connected to any PC through USB port.
Features:Magnetic stripe readers read drivers licenses, credit cards and other information encoded in the magnetic stripsCombo readers can read both bar code and magnetic stripe mediaProgrammable internal decoder and interface.Use on any PC with a USB port or a PS/2, PC/AT or Macintosh keyboard connectionDesigned for high volume traffic and are very durable
Smart Card Slave ReaderWe offer smart card slave readers, which are used along with a main reader where IN/OUT punching is to be separated. These are also used with min readers for the access control to open the door from both the side through smart card. All these systems are RS 485 communication based slave readers, which can be fitted up to 20 meter from main reader.
Technical SpecificationProximity Card Slave Reader (EM RS 485 Reader)We offer proximity card slave readers, which are used with a main proximity readers (EM4100 type). These slave readers can be used with those smart card systems where IN/OUT punching is to be separated or access control is required to open the door from both the side. Our proximity card slave readers are RS485 communication based, which can be fitted up to 20 meter from main reader.
A proximity card or prox card is a "contactless" smart card which can be read without inserting it into a reader device, as required by earlier magnetic stripe cards such as credit cards and "contact" type smart cards. The proximity cards are part of the contactless card technologies. Held near an electronic reader for a moment they enable the identification of an encoded number. The reader usually produces a beep or other sound to indicate the card has been read. Proximity cards typically have a read range up to 50 cm (< 15 inches) which is the main difference with contactless smartcard with 2 to 10 cm (1 to 3 inches) . The card can often be left in a wallet or purse [citation needed], and read by simply holding the wallet or purse near the reader. The term "proximity card" refers to the older 125 kHz devices as distinct to the newer 13.56 MHz contactless smartcards.
Specifications : Power Requirements : 5 12.5 V DC regulated, linear 2) Interfaces : Wiegand, MSR ABA Track2 or RS232 3) Read Range : Up to 13 cm at 5V with ISO card; up to 20 cm at 12.5V 4) Frequency : 125KHz, ASK 5) Format : 64 bits, Manchester coding 6) Transponder : Read only 7) Dimensions : 78 x 43 x 15 mm
8) Temperature Range : Readers: -25 65C Transponders: -55 80C.
Applications : It's designed with microprocessor and advanced magnetic card reading technology, which is compatible with computers, also available with other PC's or terminals equipment. The product can be easily applied in the following : Offices, Computer rooms, Banks & Building societies, Hospital, Gate life, Airports, Universities, Factories.
PROXIMITY 125KHz readers are high performance proximity readers featuring long range and small dimensions. The readers run from any voltage from 5 to 12.5 VDC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, Clock/ Data and RS-232 serial ASCII output, making it easy to upgrade existing installations.
Mindware (Mindware)
S-4, Plot No-7, Pok-7, Pankaj Plaza, Near Metro Station,Sector-12, Dwark, Dwarka Sector 12, Delhi, India
Share us via
