We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. From mass to retail requirement fulfillment, we can do it all. Our organization has a widespread trading system to offer our patrons with the goods all year round and make scheduled delivery.

Matalcoat 3250 acts as Corrosion Inhibitor for Pipes, rods, structural, sheets, dies, any exposed metal surface. Matalcoat performs as corrosion inhibitor on metal objects preventing it from atmospheric corrosion and rusting. Matalcoat can be ap-plied on the metal by spraying, brushing or immersing. It forms a thin waxy layer on top of the metal surface which cures within 30 minutes and it acts a cover to prevent against corrosion.

Details :

• On new metals - The surface of the metal needs to be cleaned of any oily or grease by using suitable cleaners or a diluted po-tion of Matalcoat with water can be used to clean and then dried (air dried). Matalcoat can be sprayed or brushed or im-mersed for a period of 1 - 2 minutes and then air dried for around 30 minutes to 1 hour. Full curing happens between 6 to 8 hrs depending on the conditions. Once it is dried, it forms a base for any additional coating like painting, oiling, power coating, etc
• On used metals - The surface of the metal to be cleaned of any dust or loose particles. To ease the operation, a dilute portion of Matalcoat can be applied on the metal and after 5 to 10 minutes, it can be cleaned with cloth and further again cleaned with dilute Matalcoat for better surface preparation. Matalcoat can be sprayed or brushed or immersed for a period of 1 - 2 minutes and then air dried for around 30 minutes to 1 hour. Full curing happens between 6 to 8 hrs depending on the conditions. Once it is dried, it forms a base for any additional coating like painting, oiling, power coating, etc As Thread protector for bolts, nuts, screw, any threaded component, or sliding component.
• On new parts & old parts - The parts to be cleaned of any oil or grease by any suitable cleaner or immersed in the dilute portion of Matalcoat. After air dried, the parts to be immersed for a 1 or 2 mins or sprayed in Matalcoat solution and air dried for 2 hours before use.

Decake 4312 with active ingredients regulate the surface activity and ionic activity relating to crystal growth modification / suppression during storgae3 of fertilizers. With host of promoters, migrating aids, lubricants, softeners and carrier solids and liquids, apart from coupling agents that are required to enable the organic chemicals to effectively interact with the hydrophilic fertilizer salt surfaces. Decake 4312 can be tailor-made based on specific process problems and needs, over a wide span of fertilizer salts. We provide engineering service for installation and operation of the dosing systems for con-trolled, cost effective dosing of Decake 4312 onto Fertilizer. Our products can be evaluated by IFDC procedures in laboratory as well as in the field. Details of the procedures can be provided on request. DE-CAKE 4312 is non-rubber reactive, non-toxic in nature, and do not cause any skin toxicity / irritation, plant / micro-organism toxicity related to agricultural use of NPK.

Details :

• Free flowing, no heating required
• Even distribution and coating is achieved
• Increase granule crush strength
• Lowers dust / fines, suitable for bulk blending
• Reduces moisture absorption
• Regulate nutrient release

Colaid is available as Surface coating agent and as body colouring agent. It helps in colouring of NPK / DAP / Other fertilizer grades. It improves the appearance and acts as differentiator to avoid adulteration of product.

Details :

• Differentiate the different grade of fertilizers
• Long term colour stability
• Non staining colour, does not impart to humans / plant / machinery
• High quality liquid colouring agent
• Custom made colouring agent possible

Granaid 1000 helps in granulation of NPK / DAP / Phosphate / Potash produc-tion. It improves the agglomerate particles together to form granules by repeat-ed tumbled action in the granulator. Granaid optimizes and controls the crys-talization , acts as floatation aid to keep the particles in suspension, acts as binder aid which helps in uniform crystal growth keeping the required adhesive properties and bonding strength

Details :

• Increase granule crush strength
• Lower dust and fines
• Suitable for bulk blending
• Enhance appearance & uniform distribution of crops

Defoam 5252 is specially formulated for the phosphoric acid production where the impurities of the rock (organic / inorganic) releases gases forming surface foam during reaction with sulphuric acid reducing the production and efficiency. Defoam 5252 knows down the surface foam and releases the entrapped CO2 gas bubbles and remains in the system to prevent further foaming and degas-sing of entrapped gases through multiple cycles of reaction, filtration and recy-cle acid flow. Does not damage rubber lined tanks. Defoam 2525 is specially formulated for the DAP / NPK production where the exhaust gases of reaction of phosphoric acid with ammonia and scrubber liquor which form foamy solution that diminishes the pump efficiency and overall scrubbing capacity. Defoam 2525 helps in granulation and for maintaining granule strength.

Details :

• Improves capacity utilization & yield
• Improves reaction and filtration efficiency
• Reduces materials losses in scrubbers, flash coolers and evaporators
• Reduces maintenance spending on gas removal systems
• Reduces plant downtime