Post Buy Requirement

Other Products / Services

Medical Oxygen Regulator

Used to regulate the pressure of gas in cylinder during welding, cutting and heating processes.
Made especially from forged brass.
In this series, there are two types of regulators:
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Comes with German make 'WIKA' pressure gauges which are highly accurate.
View Complete Details

LPG Pressure Regulator

Used with LPG gas cylinder especially for industrial purposes.
Following models are available:
Without Gauge
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
View Complete Details

Electrode Baking Oven

electrode baking ovenUsed to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
View Complete Details

Welding Hand Shield

Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
View Complete Details

Polycarbonate Shield

These are held in hand while doing welding to provide protection to eyes, ears, face, neck and part of top of the head during welding and cutting process.
In this also instead of glass, polycarbonate lens is used.
View Complete Details

Thermoplastic Rubber

These have same uses as rubber hose.
These have same uses as rubber hose.
Light in weight: Weight of TPR hose is around 150 gm per meter as against 300 gm per meter of rubber hose.
TPR hose is more flexible than rubber hose
TPR hose has more bursting pressure than rubber hose because of double braiding in it.
It is suitable for following welding situation:
Overhead Welding
Circular Cutting
View Complete Details

Argon Regulator

Used to regulate the pressure of gas in cylinder during welding, cutting and heating processes.
Made especially from forged brass.
In this series, there are two types of regulators:
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Comes with German make 'WIKA' pressure gauges which are highly accurate.
View Complete Details

Lpg Gas Equipment

ISI approved
Used with LPG gas cylinder especially for industrial purposes.
Following models are available:
Without Gauge
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
View Complete Details

Industrial Safety Belts

Used to provide protection generally while working at higher elevations.
ISI approved.
'ARCON' safety harness webbing is made of polyester which leads to higher strength of harness and is very comfortable to wear.
Following are the models available in safety harness:
Full body with Auto Strip Lock Hook (Single Rope)
Full body with Snap Hook (Single Rope)
Full body with Scaffold Hook (Single Rope)
Full body with Carabiner Hook (Single Rope)
Full body with Auto Strip Lock Hook (Double Rope)
Full body with Snap Hook (Double Rope)
Full body with Scaffold Hook (Double Rope)
Full body with Carabiner Hook (Double Rope)
View Complete Details

Pug Cutting Machine

Suitable for cutting ferrous metal sheets and plates in straight direction.
Can also be used for circular cutting using circular cutting attachment provided with the machine.
Curved surface of the body provides ample cooling space for drive motor and also prevents spatter from sticking to the surface.
View Complete Details

Cutting Nozzle

Used with gas cutter.
Available separately for cutting with oxy - acetylene gas ('A' type) and with oxy - fuel gas ('B' type).
'ARCON' cutting nozzles are famous for its precise cutting which leads to saving of gas, material as well as time.
View Complete Details

Electrode Drying Oven

Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
Following are the different models available:
A-HQTS5: This is portable oven suitable for up to 5 kgs electrode and comes with temperature controller thermostat.
A-HQD5: This is portable oven suitable for up to 5 kgs electrode and comes with digital temperature controller.
View Complete Details

Lpg Equipments

Used with LPG gas cylinder especially for industrial purposes.
Following models are available:
Without Gauge,
Single Gauge: Showing only inlet pressure,
Double Gauge: Showing both inlet and outlet pressure.
View Complete Details

Industrial Shoes

Used to provide protection to the feet of the user.
Made of high quality leather with special focus on quality.
Comfortable to wear, light weight and highly durable.
Various models are available as per requirements of clients:
PVC sole safety shoes without foaming
PVC sole safety shoes with foaming
P.U. Injection safety shoes with split leather upper
P.U. Injection safety shoes with chrome leather upper
View Complete Details

Welding Consumable

We provide aluminium TIGMIG rods and wires with high levels of purity.
These are available in straight lengths of 1 mtr. or spools weighing 7 kgs. approx. All the straight lengths are embossed with grades.
Different grades are available as per requirement of the client:
G1B1050: This is pure aluminium (99.97% aluminium) and is used for welding of aluminium and aluminium constructions.
NG214043: This is aluminium alloy with 5% silicon and is used for welding AlSi alloy with Si content up to 6%
NG24047: This is aluminium alloy with 10% silicon. This is high fluidity material with good finish and strong joints.
NG65356: This is aluminium alloy with 5% magnesium and is used for welding of AlMg alloys for container, automobiles industry and ship building.
View Complete Details

Aluminum Welding Machine

This is portable welding machine suitable for Electrode and TIG welding. This is single phase machine and very light in weight. This machine has current capacity of 200 Amps and is suitable for welding up to 3.15 mm TIG rods and electrode.
View Complete Details

Industrial Safety Shoes

Used to provide protection to the feet of the user.
Made of high quality leather with special focus on quality.
Comfortable to wear, light weight and highly durable.
Various models are available as per requirements of clients:
PVC sole safety shoes without foaming.
PVC sole safety shoes with foaming.
P.U. Injection safety shoes with split leather upper.
P.U. Injection safety shoes with chrome leather upper.
View Complete Details

Welding Helmet

Used to provide protection to the eyes, ears, face, neck and part of top of the head of the user during welding and cutting process.
Can be worn on head using the ratchet system provided in it.
In these helmets, polycarbonate lens is provided instead of glass which ensures greater visibility and longer life.
View Complete Details

Welding Electrode Holder

Used to hold electrode during the welding process.
Available in two types:
Fully Insulated (A-Type),
Semi Insulated (B-Type).
Three varieties are available in both these types:
Mark-I (600A30%): Suitable for all size of electrode,
Mark-II (400A30%): Suitable up to 4.0 mm electrode,
Mark-III (200A30%): Suitable up to 3.15 mm electrode,
Other than the above, two more special varieties of holders are available:
Heavy Duty Holder (used for heavy duty welding),
Rubber Grip Screw Type Holder.
View Complete Details

Leather Apron

Worn by the welder during welding and cutting processes and provides protection to chest and abdomen.
Made from pure leather with a thickness of minimum 1.5 mm.
Light in weight and comfortable to wear.
View Complete Details

Rubber Pipes

Used to carry gases from cylinders to their place of use.
ISI approved.
Highly durable.
Non-porous which prevents loss of valuable gas.
Separate hose is available for LPG and Oxygen gas and the same should not be interchanged.
ARCON also provides dual hose pipe where both LPG hose pipe and oxygen hose pipe are joined together using special material. This reduces the effort of the personnel to carry two separate hose pipes for two gases. Also eliminates the kink problem.
View Complete Details

Gas Welding Rods

Used to regulate the pressure of gas in cylinder during welding, cutting and heating processes.
Made especially from forged brass.
In this series, there are two types of regulators:
Single Gauge: Showing only inlet pressure
Double Gauge: Showing both inlet and outlet pressure
Comes with German make 'WIKA' pressure gauges which are highly accurate.
View Complete Details

Welding Powder

  • Type Pure
  • Application Welding
  • Color Black, Grey
  • Form Powder
  • Purity 100%
  • Storage Cool & Dry Place

Used as a medium for supplying power from a welding machine to the work being done. Available in both aluminium and copper conductor in sizes ranging from 16 mm2 to 120 mm2. Both copper and aluminium cables are available in TRS as well as HOFR insulation. Moulding process, used to manufacture these cables, ensures longer life of cable.

View Complete Details

Welding Sets

This is used specially for MIG Welding. This set comprises of three phase - 415V Input Supply, wire feeder, CO2 assembly and MIG Torch. Following models are available in this:
A: RM400: This is suitable for up to 1.2 mm MIG Wire,
A: RM600: This is suitable for up to 1.6 mm MIG Wire.
View Complete Details

Welding Flux

Inverter technology is a voltage conversion system which applied to welding makes compact power sources with low energy conversion. This rectifier is suitable for both TIG as well as Electrode welding. Following are the models available:
View Complete Details

Co2 Regulator

Suitable for gas welding, cutting, brazing and heating processes.
Outlet pressure is more accurate as compared to single stage because total pressure drops in two stages which also results in greater life of diaphragms. In the first stage, pressure is fixed and in the second stage, it can be regulated by using pressure key.
Made from forged brass.
Comes with German make 'WIKA' pressure gauges which are highly accurate.
View Complete Details

Lpg Valves

Safety devices which are used with pressure regulators and gas cutter to prevent back-flow of gas.
Available for both gas cutter and pressure regulators.
Allows gas to flow only in one direction and prevents it from flowing in reverse direction.
View Complete Details

Pvc Welding Rod

Used to remove dampness from the welding electrodes as moisture in electrode adversely affects quality of welding.
In 'ARCON' electrode drying ovens, high quality heaters, German thermostats and Digital Temperature Controllers are used to ensure longer life of these ovens. Also high quality insulation is used leading to low heat loss and hence quicker drying of electrode.
View Complete Details

Torch Burner

These are used for gas welding. These are suitable for following purposes:
Gas Welding with Oxy - Carbide Gas
Gas Welding with Oxy - DA Gas
Gas Welding with Oxy - Hydrogen Gas
Gas Welding & Heating with Oxy - LPG
Brazing with Oxy - LPG Hydrogen Coal Gas
View Complete Details

Welding Accessories

Arcon electrode drying oven are used for drying electrode before welding, this comes in different capacities: 5kg, 10kg, 25kg, 50kg and 100kg.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Raj.k.mittal (Mitco Weld Products Pvt. Ltd.)
  • A-97, Mangolpuri Industrial Area, Phase Ii, Delhi - 110034
  • Share us via
  • Call 08068051314 Ext. 060