Digital Automatic Tap Density / Bulk Density Apparatus offered by us is designed to meet the requirements of USP Standards. This product can hold two cylinders and its capacity is 100 ml. The mechanism provides simultaneous rotating and tapping motion to the cylinders, which facilitates packing the sample under test evenly and uniformly together. Users can select the number of stokes in the counter and after selecting just press start, it will start the stokes & the display shows the number of strokes.

• Incorporated with Advanced Microcontroller.
• Alphanumeric display and user friendly feather touch keypad.
• Equipped with inbuilt validation facility.
• Non-volatile memory for storage of 24 test methods data.
• Informative help prompt messages displayed, to guide user while conducting test.
• Updated test status displayed.
• Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio
• Simultaneous action of rotating and tapping of the cylinders.
• Supports USP I and USP II. ASTM method (Available Optionally)
• Print format as per GLP requirements.

These apparatus are easy to use & maintain for their validation facility and greater efficiency. Friablity Test Apparatus are widely used to measure the durability and abrasiveness of tablets.

Extremely "compact" construction Diaphragm type vacuum pump Polycarbonate vacuum desiccator Stainless steel (GMP) construction Vacuum level up to 22' of Hg Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.

Programmable instrument designed to maintain 1C per minute heating rate at athe time of melting point for the highest accuracy. Heating rate is precisely controlled by microprocessor circuit and is equipped with silicon Oil Bath. Suitable for determination of melting point , Melting range, Boiling points. Printer interface is provided for the printer.

For Routine Q.C. Tests & for Institutes. Microprocessor Based unit with large LCD display for temperature and speed indicators. Conventional model AS per USP Standards. Economical version with 6 and 8 tests available for routine analysis.

This cost-effective instrument is specially designed for Quality Control Labs for their routine tests and is also suitable for institutes. This system (apparatus) is having most of the functions of advance version and is suitable to conduct regular routine tests.

• The 8/6 station microcontroller based instrument is designed to conduct the test simultaneously in all vessels in similar conditions as per IP/BP/USP Standards.
• Equipped with a large graphic LCD.
• Incorporated with a reliable maintenance free stepper motor drive for stirrer system.
• 25 test methods, 20 for controlled drug and 5 test methods to test SUSTAINED RELEASE Tablets with 18 different settable time intervals.
• Dual channel system ensures accurate and precise control of temperature in dissolution vessels as well as water bath.
• Water bath with non corrosive tank pate.
• Feature of protection for over temperature for heater.
• Individual vessels centring is possible.
• Power failure indication program is incorporated.
• Wobble and vibration free instrument.

All the models of Disintegration Test Apparatus meet International Standards with respect to calibration, Validation and IQ, OQ requirements.

• Equipped with individual maintenance free stepper motors to drive baskets up/down independently.
• Dual channels temperature monitoring system to ensure precise temperature control of the tank and to display temperature of both the beakers.
• 'PAUSE' facility: This facility permits to check disintegration state of the tablets intermittently and continue test without disturbing test parameters.
• Two different batch products can be analyzed simultaneously.
• Beaker temperature of both baskets displayed individually.
• Memory to store 25 tests method parameters.
• Wobble and vibration free instrument.

Digital Automatic Tap Density / Bulk Density Apparatus offered by us is designed to meet the requirements of USP Standards. This product can hold two cylinders and its capacity is 100 ml. The mechanism provides simultaneous rotating and tapping motion to the cylinders, which facilitates packing the sample under test evenly and uniformly together. Users can select the number of stokes in the counter and after selecting just press start, it will start the stokes & the display shows the number of strokes.

• Incorporated with Advanced Microcontroller.
• Alphanumeric display and user friendly feather touch keypad.
• Equipped with inbuilt validation facility.
• Non-volatile memory for storage of 24 test methods data.
• Informative help prompt messages displayed, to guide user while conducting test.
• Updated test status displayed.
• Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio
• Simultaneous action of rotating and tapping of the cylinders.
• Supports USP I and USP II. ASTM method (Available Optionally)
• Print format as per GLP requirements.

These apparatus are easy to use & maintain for their validation facility and greater efficiency. Friablity Test Apparatus are widely used to measure the durability and abrasiveness of tablets.

Extremely "compact" construction Diaphragm type vacuum pump Polycarbonate vacuum desiccator Stainless steel (GMP) construction Vacuum level up to 22' of Hg Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.

Programmable instrument designed to maintain 1C per minute heating rate at athe time of melting point for the highest accuracy. Heating rate is precisely controlled by microprocessor circuit and is equipped with silicon Oil Bath. Suitable for determination of melting point , Melting range, Boiling points. Printer interface is provided for the printer.

For Routine Q.C. Tests & for Institutes. Microprocessor Based unit with large LCD display for temperature and speed indicators. Conventional model AS per USP Standards. Economical version with 6 and 8 tests available for routine analysis.

This cost-effective instrument is specially designed for Quality Control Labs for their routine tests and is also suitable for institutes. This system (apparatus) is having most of the functions of advance version and is suitable to conduct regular routine tests.

• The 8/6 station microcontroller based instrument is designed to conduct the test simultaneously in all vessels in similar conditions as per IP/BP/USP Standards.
• Equipped with a large graphic LCD.
• Incorporated with a reliable maintenance free stepper motor drive for stirrer system.
• 25 test methods, 20 for controlled drug and 5 test methods to test SUSTAINED RELEASE Tablets with 18 different settable time intervals.
• Dual channel system ensures accurate and precise control of temperature in dissolution vessels as well as water bath.
• Water bath with non corrosive tank pate.
• Feature of protection for over temperature for heater.
• Individual vessels centring is possible.
• Power failure indication program is incorporated.
• Wobble and vibration free instrument.

All the models of Disintegration Test Apparatus meet International Standards with respect to calibration, Validation and IQ, OQ requirements.

• Equipped with individual maintenance free stepper motors to drive baskets up/down independently.
• Dual channels temperature monitoring system to ensure precise temperature control of the tank and to display temperature of both the beakers.
• 'PAUSE' facility: This facility permits to check disintegration state of the tablets intermittently and continue test without disturbing test parameters.
• Two different batch products can be analyzed simultaneously.
• Beaker temperature of both baskets displayed individually.
• Memory to store 25 tests method parameters.
• Wobble and vibration free instrument.