Features:

1. 16 Logic Level Inputs & 16 LED for output indication.


2. Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.


3. Dual Logic Pulsar, Logic Probe, SPDT Relay, Buzzer, Bar LED display, DPM for Voltage & Current, Potentiometers of 1K, 1M,


4. Two digit 7 segment display with HEX to 7 segment decoder.


5. Bread Board of 1260 tie points


6. Sine, Square and Triangular output waveform from 0-200Khz.


7. Fixed DC +5V, 12V power supply.


8. All interconnections are made using 2mm banana Patch cord.

Instrumentation Trainer Kit, that we make available, is used for understanding various concepts in an easy manner. Made with top quality components, Instrumentation Trainer Kit offered by us is precision engineered for excellent functionality.

Features:

1. Completely self-contained stand alone unit.


2. Built in IC based DC regulated power supply.


3. Test points provided on panel at various stages in the circuit.


4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.


5. Set of required number of Patch cords.

Specifications:

• 2mm BS-4 Jack Terminal for Various Test Point.


• Power LED Indication.


• In-Built Digital Indicator.


• Analog Output: 0 to 1000mV.


• Built in Regulated DC Source.


• AC Input: 230V AC, 50 Hz, 10%.


• Mounted on a Sophisticated Cabinet.

OP AMP Training Kit is fully loaded with the latest features. Perfectly fabricated with the highest grade components, OP AMP Training Kit provided by us is known for its high performance and accurate results. Students find it easy to understand the concepts with our OP AMP Training Kit.

Features:

1. Completely self-contained stand alone unit.


2. Built in IC based DC regulated power supply.


3. Test points provided on panel at various stages in the circuit.


4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.


5. Set of required number of Patch cords.

Specifications:

• AC Power Supply : 15 . 0 . 15 V AC.


• DC Power Supply : Fixed : 5 Volts @ 1 Amp. , 12 Volts @ 1 Amp 1.2 to 15 @ 1 Amp Variable DC


• Built In Op-Amp ICs: 741.


• Built In Digital meter 3.5 Digit.


• Clock Generator : Range : 1 HZ to 10 KHz.


• On Board : Potentiometers - 1K , 4.7 K , 10 K , 47 K , 100 K Ohm to 470 K Ohm.


• AC Input : 230V AC , 50 Hz , 10%.

Trainer has built in requisite testing kit typically consisting of voltage injector, current injector, elapsed time counter (1 msec resolution), trip logic etc. The trainer need a few set of associated testing (current / voltage injection etc.) panels (4-5 nos. typically) which are mounted in a light weight sturdy aluminum profile flat demo panel system. Do not need any separate testing kit.

Features:

1. The above trainer has built in requisite testing kit typically consisting of voltage injector, current injector, elapsed time counter (1 msec resolution), trip logic etc.


2. The trainer need a few set of associated testing (current /voltage injection etc.) panels (4-5 nos. typically) which are mounted in a light weight sturdy aluminum profile flat demo panel system. Do not need any separate testing kit.


3. The trainer need a few set of associated testing (current / voltage injection etc.) panels (4-5 nos. typically) which are mounted in a light weight sturdy aluminum profile flat demo panel system. Do not need any separate testing kit.


4. Facilitates easy and safe wiring by students due to use of 4mm sturdy Shrouded banana patch cords and shrouded socket arrange-ments for high voltage circuits

We are a well-known Electrical Machine Trainer Manufacturer and Supplier. We offer quality assured Electrical Machine Trainer that is made with top quality components. Our Electrical Machine Trainer is manufactured with premium grade components with the latest technology. We have become a preferred name in market for availing Electrical Machine Trainer.

Features:

1. Facilitates easy and safe wiring by students due to use of 4mm sturdy shrouded banana patch cords and shrouded socket arrangements.


2. All machines are mounted on finely painted sturdy base frame with easy machine interchangeability Use of gear coupling facilitates screwless coupling.


3. With due emphasis on student safety machines operate upto 300W power levels and upto 1500 RPM, without compromising didactic use Able to draw all graphs.


4. Trunnion mounted DC Integrated machine is used as Dynamometer for loading other machines (Motors / generators both); unlike magnetic powder brake or eddy current brake which can load only coupled Motors and not generators, with facility to measure shaft power using electronic torque / speed measurement

Specifications:Aluminum profile sturdy (4x3) flat panel (table top) system, carrying various high voltage components housed in plastic enclosures (panel) to minimise shock possibility.

• 1 Phase Motor, Alternator & Sync. Motor Panel (EMT 16A) [14 Shrouded Banana]


• Integrated AC 1 phase multifunction measurement panel (EMT20F) [8 Shrouded Banana]


• DC voltmeter and DC ammeterpanel (EMT6A/B) [14 Shrouded Banana]


• Instrumentation Power supply cum Multichannel DPM panel (EMT8) [10 Shrouded Banana]


• SCR Actuator (variable DC) cum sensor signal conditioning panel (EMT9x 2 Nos)[4 Shrouded Banana]


• Variable AC/DC PowerSupply Panel (EMT23) [8 Shrouded Banana]

Facilitates easy and safe wiring by students due to use of 4mm sturdy shrouded banana patch cords and shrouded socket arrangements. All machines are mounted on finely painted sturdy base frame with easy machine interchangeability Use of gear coupling facilitates screwless coupling. With due emphasis on student safety machines operate upto 300W power levels and upto 1500 RPM, without compromising didactic use Able to draw all graphs. Trunnion mounted DC Integrated machine is used as Dynamometer for loading other machines (Motors / generators both); unlike magnetic powder brake or eddy current brake which can load only coupled Motors and not generators, with facility to measure shaft power using electronic torque / speed measurement

Features:

1. Facilitates easy and safe wiring by students due to use of 4mm sturdy shrouded banana patch cords and shrouded socket arrangements.


2. All machines are mounted on finely painted sturdy base frame.


3. With due emphasis on student safety machines operate upto 300W power levels and upto 1500RPM, without compromising didactic use Able to draw all graphs.


4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.


5. Break pulley arrangement for variable loading

of motor.

Flow table is designed for the determination of the flow of the Portland cement concrete.

Instrument is to determine the Impact Value of Coarse Aggregate.

The vibrating table is used for compacting concrete cubes and cylinders.

Blower, Balance And Small Aspect Ratio Model, Water Flow Channel, Subsonic Wind Tunnel, Manometer Pilot Static Tube, Circular Cylinder & Aerofoil Pressure Distribution Models, Wind Tunnel Strain Gauge Balance, Supersonic Wind Tunnel, Mercury Manometer, Schlieren System & Shadow Graph System, Sharp Nosed And Blunt Nosed Models.

Venturimeter Setup, Pipe Friction Setup, Pilot Tube Setup, Jet Pump, Submersible Pump, Centrifugal Pump, Reciprocating Pump, Pelton Wheel Turbine & Francis Turbine, Viscosity Meter, Hele-Shaw Apparatus

Piston Engine, Jet Engine, Forced Convective And Free Convective Apparatus, 2-D Travers In Mechanism, Free Jet Test Setup, Aluminium Plates With Deflection Mechanism And Ramjet

Four Stroke Twin Cylinder Diesel Engine, Cut Section Model of Two Stroke Petrol Engine And Four Stroke Diesel Engine, Parallel & Counter Flow Heat Exchanger Test Rig, Refrigeration Test Rig, Air-Conditioning Test Rig, Conductive Heat Transfer Setup And Composite Wall.