Other Products / Services #42373

All MM propellers are custom designed and made for each specific application. Propellers vary in diameter from 125 mm to 2500mm Due to the complex geometry of the propellers, the casting and machining process is monitored from start to the end this is ensured to attain high quality. Propellers are made out of nickel aluminum bronze & manganese bronze. All propellers are manufactured are as per ISO CLASS S, I, II, III. We make propellers for vessels, such as container barge, tankers, bulk carriers, tugboats and also for barges

These cages are produced using the latest automatic welding machines. These products are characteristic of their finish, ensuring smooth surfaces devoid of any burrs and sharp edges. Moreover the automatic machines provide For accurate dimensions and strength. The filter bag cages are the support system of the critical filter bags in a dust collector. Its quality in terms of dimensions, finish etc define the life of the Filter bags and ultimately the emissions from the system. Poor quality filter bags can cause many failures like, Sharp edges and burrs creating holes in the bagsLoose ends of wires not welded properly damagebags especially at the bottom* Incorrect dimension of bags cause mechanical abrasion during pulsing

Thigh quality solenoid valves for Pulsing Compressed air in reverse pulse jet dust collectors. The mmp Pulsion is characterised by its advanced design, proven raftsmanship, superior tooling and high quality raw materials.Advantages:Precision Aluminum Die Cast Body and CoverTransparent corrosion resistance surface coatingRigid Non-LeakingMetal and Rubber Gasket on DiaphragmHigh attraction magnetic head on diaphragm for faster and reliable movementGood Valve actuation even at 85% of rated voltageReliable closing capability at as low as 1.5 BarInterchangeable parts for valves of different sizes of same seriesHighly reliable diaphragm tested to 1 million cyclesPulsion-Z Series

The Polyurethane (PU) pleated filter bags provide a unique design that can be easily retrofitted in existing dust collectors. These bags have a flexible PU top and bottom and the bags are inserted in the system as a top loader. A metal plug is provided with each bag that is to be inserted inside the PU top. The PU expands because of the metal plug and seals the bag at the cell plate. Owing to the mechanical properties of PU, these bags have a max temperature limitation of 90 deg C

The vessels under the brand name of MMP H2O are produced in the state of art facility at Kolkata, India. These vessels have an inner PE liner and a Fibre Glass winding over it. The vessels have a smooth fibre free inner surface with a wide range of chemical compatibility. A lot of R&D has gone into ensuring the aesthetics of the outer surface along with its long term and consistent performance. These vessels are individually subjected to hydrostatic pressure test and are certified for an operating pressure of 10 BAR and Burst pressure of 40 BAR. These vessels are stocked at warehouses of MMP offices and Dealers across the country.

MMP is an authorised distributor of HM DIGITAL INC, USA for their range of Hand Held Instruments. The products include, TDS, Conductivity, pH and ORP meters. These products are offered in different capacities and configurations. The high end products of HM are some of the most accurate instruments that are commercially available in the world.

MMP Offers a range of Panel Mounted instruments, to complete its kitty of critical components for a RO system. These include TDS EC pH ORP monitors as well as controllers. These instruments are offered along with sensors and are highly accurate. They are sturdy and sleek in design with a large display screen.

The FRP tanks has been popularised over the last 2 decades as an intelligent alternative to metallic tanks that find applications in water treatment. These tanks are made of Fibre Reinforced Plastic material, which are characterised by their low weight, resistance to impact and abrasion and corrosion free. MMP is an established manufacturer of FRP Tanks in India. The vessels under the brand name of MMP H2O are produced in the state of art facility at Kolkata, India. These vessels have an inner PE liner and a Fibre Glass winding over it. The vessels have a smooth fibre free inner surface with a wide range of chemical compatibility. A lot of R&D has gone into ensuring the aesthetics of the outer surface along with its long term and consistent performance. These vessels are individually subjected to hydrostatic pressure test and are certified for an operating pressure of 10 BAR and Burst pressure of 40 BAR. These vessels are stocked at warehouses of MMP offices and Dealers across the country.

These are also referred to as Rotameters. MMP offers analog meters to measure the flow rate of a single phase non-pulsating liquid. Available in Online Tube Fitting Panel Mounted Design, They are featured by their low weight, long life span and beautiful design.

MMP Offers a range of moulded polypropylene distribution systems for composite and FRP tanks. These are characteristic of their resistance against chemicals and impact. Some of the features of these products include: Unique Turn Cam-Lock Hubs & Laterals to make assembly easy and secure. Unique Slot design assures a uniform, vertical distribution of flow and < 5PSI pressure drop.

A wide range of purification needs. The beneficial behaviour of the carbonized granules is its capacity of adsorption. This is a phenomenon by which contaminants tend to adhere to the surface of the granule. The sheer size of the surface of the activated carbon makes it so effective. The active surface area is typically 500 to 1500 m2gm. The Granular Activated Carbon (GAC) of particle size 0.5 to 4mm are popularly used in processes running continuously for instance GAC packed in columns inside a FRP tank. In R.O.technology, GAC is used to remove chlorine from the water that is intolerable to the R.O.Membrane. Moreover carbon polishing improves the taste of the water.

Thigh quality solenoid valves for Pulsing Compressed air in reverse pulse jet dust collectors. The mmp Pulsion is characterised by its advanced design, proven raftsmanship, superior tooling and high quality raw materials. High attraction magnetic head on diaphragm for faster and reliable movement.

MMP Filter bag cages also focuses on reducing the lead time for this product, owing to the high capacity of the machines. MMP cages are available in a variety of designs top cap, length of cages, number of vertical wires and rings, moc of wires etc to suit custom requirements. The cages can be provided in a Range of outer diameter starting from 117 mm to 152mm. The Cage lengths can be made as per customer requirements. The possibility of cage joints in 3 configurations provide for greater Flexibility and reduction of transportation costs.

MMP GRP pipes are designed for a minimum life time of 50 years, in accordance with present standards of GRP pipes. Based on extremely good corrosion resistance MMP GLAS GRP pipes do not need periodic maintenance or cathodic protection for below ground installations. MMP GLAS GRP pipes are delivered in standard lengths of 6Mtrs, hence fewer joints than in pipes made from traditional materials. Fewer joints mean less chance of any problems arising out of leakage.

The FRP tanks has been popularised over the last 2 decades as an intelligent alternative to metallic tanks that find applications in water treatment. These tanks are made of Fibre Reinforced Plastic material, which are characterised by their low weight, resistance to impact and abrasion and corrosion free.

The pleated filter bags and cartridges are an innovation over the conventional filter bags to address market requirements of higher efficiency and lower bag filter space requirement. These products are made up of spun bonded polyester, which works on the surface filtration technology. As the media is assembled in a pleated fashion, it provides 3 to 4 times higher filtration area compared to conventional bags.

High absorption without releasing carbon particlesHigh dirt absorption capacity, low pressure drop and effective filtrationDisposal of chlorine, organics, taste and odour, along with other contaminants present in the waterLong service life

Filter Bag cages are high end, precision products. They are manufactured using latest state of art automatic spot welding machines. These products are characteristic of their final finish, ensuring smooth surfaces without any burrs and sharp edges. The CNC machinery ensures accurate dimensions and strength.