Post Buy Requirement
ME
Delhi, India
Verified Add Review

Electrical & Electronic Testing Devices #743958

Fused Voltage Probes

CONZERV Fused Voltage Probes allow quick, safe connections to live circuits for voltage measurements. The probes are HRC fused for safety and come with a 2 metre long, high flexibility, insulated cable. The Probes will not introduce any phase shifts, ensuring accurate voltage signals for Power and Energy measurements, and are suitable for use with CONZERV instruments.

Technical Specifications:

CODE

DESCRIPTION

COLOURS

SET 5

Set of Five Probes

Red, Yellow, Blue, Black, Green

SET 4

Set of Four Probes

Red, Yellow, Blue, Black

SET 3

Set of Three Probes

Red, Yellow, Blue

ONE

Single Probe

Standard Black, Specify if Red, Yellow, Green or Blue required

ORDERING OPTION:

Add-BAN : Substitutes a 4 mm Banana Jack termination instead of a spade lug.

Ordering Example: 1) Voltage Probe Set4  2) Voltage Probe ONE RED BAN

SPARES:

Pack of 10 spare fuses for Voltage Probe.

CONZERV strives for continuous product innovation. Product specifications are therefore subject to change without notice

View Complete Details

Electric Motor Checker

  • Insulation Resistance 0-20MΩ at 500V DC, Max. Current 0.25 mA (with electronic zero set facility)
  • Resistance 0-60Ω in 6 ranges (0-0.2Ω F.S.D. in Range 1) 0-0.2/0.6/2/6/20/60Ω marked as % on dial)
  • Inductance 0-300mH in 6 ranges (0-1mH F.S.D. in Range 1) (i.e. 0-1/3/10/30/100/300mH, Marked as % on dial)
  • Self Battery Test to check the condition of the battery of the instrument itself
  • Power Source 1.5V x 6 Nos AA size cells or 230V AC, 50Hz (Provided with the condition of the battery Eliminator (Adaptor))
  • Dimensions 238 mm x 216 mm x 115 mm (approx.)
  • Weight 2.335 kg. (With Batteries) (approx.)

Housed in attractive wooden body with sunmica finish. For comprehensive check of Rotor and Stator Inductance, resistance and Insulation Resistance without dismantling the Motoe. Only to isolate the Power supply.

View Complete Details

Phase Sequence Indicator

  • Frequency 25-65Hz
  • Working Voltage 100V to 500V AC
  • Working Voltage 100-500 Volt (in vertical position) 50-500 Volt (in horizontal position)
  • Frequenct 25-60Hz
  • Size 96 mm x 96 mm

The instrument should not be left in circuit. Rating 30 se. @ 500Volt Supplied with case & leads.

View Complete Details

Current Indicators

The CR-45 series of Wire-Mounted Electrical Current Indicators provides an effective method of monitoring electrical current. The indicator is attached directly to a current-carrying wire. When the current exceeds the turn-on point, the LED will illuminate to indicate the presence of current.

The CR-45 series of Wire-Mounted Electrical Current Indicators provides an effective method of monitoring electrical current. The indicator is attached directly to a current-carrying wire. When the current exceeds the turn-on point, the LED will illuminate to indicate the presence of current.

Features Specifications Applications
Self powered
Red or green indicator
Easy to Install
Supplied with plastic tie
Bright yellow case for easy identification
Panel mounting bracket available
Min. Turn-on Point: 2.0 for Red
Min. Turn-on Point: 2.5 for Green
Max. Continuous Current: 100 Amps
Frequency: 50 to 60 Hz
Monitor status of heater elements
Observe remote loads
Indicate phase loss
Monitor motor operation
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Harish Jethwani (Monarch Electronics)
  • 16 Rajendra Bhawanrnrajendra Placernnew Delhi.110008, India
  • Share us via
Retailer of Electrical & Electronic Testing Devices from Delhi, Delhi by Monarch Electronics
Post Buy Requirement
ME
Delhi, India
Verified Add Review

Electrical & Electronic Testing Devices #743958

Fused Voltage Probes

CONZERV Fused Voltage Probes allow quick, safe connections to live circuits for voltage measurements. The probes are HRC fused for safety and come with a 2 metre long, high flexibility, insulated cable. The Probes will not introduce any phase shifts, ensuring accurate voltage signals for Power and Energy measurements, and are suitable for use with CONZERV instruments.

Technical Specifications:

CODE

DESCRIPTION

COLOURS

SET 5

Set of Five Probes

Red, Yellow, Blue, Black, Green

SET 4

Set of Four Probes

Red, Yellow, Blue, Black

SET 3

Set of Three Probes

Red, Yellow, Blue

ONE

Single Probe

Standard Black, Specify if Red, Yellow, Green or Blue required

ORDERING OPTION:

Add-BAN : Substitutes a 4 mm Banana Jack termination instead of a spade lug.

Ordering Example: 1) Voltage Probe Set4  2) Voltage Probe ONE RED BAN

SPARES:

Pack of 10 spare fuses for Voltage Probe.

CONZERV strives for continuous product innovation. Product specifications are therefore subject to change without notice

View Complete Details

Electric Motor Checker

  • Insulation Resistance 0-20MΩ at 500V DC, Max. Current 0.25 mA (with electronic zero set facility)
  • Resistance 0-60Ω in 6 ranges (0-0.2Ω F.S.D. in Range 1) 0-0.2/0.6/2/6/20/60Ω marked as % on dial)
  • Inductance 0-300mH in 6 ranges (0-1mH F.S.D. in Range 1) (i.e. 0-1/3/10/30/100/300mH, Marked as % on dial)
  • Self Battery Test to check the condition of the battery of the instrument itself
  • Power Source 1.5V x 6 Nos AA size cells or 230V AC, 50Hz (Provided with the condition of the battery Eliminator (Adaptor))
  • Dimensions 238 mm x 216 mm x 115 mm (approx.)
  • Weight 2.335 kg. (With Batteries) (approx.)

Housed in attractive wooden body with sunmica finish. For comprehensive check of Rotor and Stator Inductance, resistance and Insulation Resistance without dismantling the Motoe. Only to isolate the Power supply.

View Complete Details

Phase Sequence Indicator

  • Frequency 25-65Hz
  • Working Voltage 100V to 500V AC
  • Working Voltage 100-500 Volt (in vertical position) 50-500 Volt (in horizontal position)
  • Frequenct 25-60Hz
  • Size 96 mm x 96 mm

The instrument should not be left in circuit. Rating 30 se. @ 500Volt Supplied with case & leads.

View Complete Details

Current Indicators

The CR-45 series of Wire-Mounted Electrical Current Indicators provides an effective method of monitoring electrical current. The indicator is attached directly to a current-carrying wire. When the current exceeds the turn-on point, the LED will illuminate to indicate the presence of current.

The CR-45 series of Wire-Mounted Electrical Current Indicators provides an effective method of monitoring electrical current. The indicator is attached directly to a current-carrying wire. When the current exceeds the turn-on point, the LED will illuminate to indicate the presence of current.

Features Specifications Applications
Self powered
Red or green indicator
Easy to Install
Supplied with plastic tie
Bright yellow case for easy identification
Panel mounting bracket available
Min. Turn-on Point: 2.0 for Red
Min. Turn-on Point: 2.5 for Green
Max. Continuous Current: 100 Amps
Frequency: 50 to 60 Hz
Monitor status of heater elements
Observe remote loads
Indicate phase loss
Monitor motor operation
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Harish Jethwani (Monarch Electronics)
  • 16 Rajendra Bhawanrnrajendra Placernnew Delhi.110008, India
  • Share us via