Monarch Industrial Products (I) Pvt. Ltd

Commercial floor coatings the flooring is most operational part of any industrial, commercial, residential or institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's floorclad screeds & toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • epoxypolyurethane primersdamp-tolerant & oil insensitive primers for metal & concrete surfaces • epoxy polyurethanehybrid puacrylic based re - lay over - lay roller floor toppings • epoxy based mortars for floor patch repairsfloor screeds • polymer modified cementitious mortars for floor patch repairsself-leveling floor screeds • high performance self leveling floor toppings - 0.5mm to 5mm • ancillary flooring products like epoxy covings, floor markings etc.,

Summer Cool Coatings All the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch’s OzoProtect Heat Solar Reflective Coatings reflects up to 98% of heat back to its source. Monarch's Ozoprotect specialized coating containing ceramic microspheres and or glass microspheres keeps you cooler in the summer and warmer in the winter reducing cooling cost during summer months and heating cost during winter months. The load reduction of air conditioning or heater and corresponding electrical consumption saves energy cost up to 40% all round year. The payback period is less than 6 months. OzoProtect significantly contributes to green building certification as Solar Reflectance Index (SRI) is 116 and prevention of global warming besides reducing evaporation loss in petroleum storage tanks. Features • Reflects 98% of heat in roofs ceilings walls. • Reduces Internal temperature of building up to 15°C. • Reduces evaporation losses, pollution, smog, the urban heat island effect and global warming. • Quick payback period - saves over INR 5200 year for every 1°C temperature reduction – saves over 40% in energy bills for Air conditioner Heaters. • Conventional insulation system only slows the rate of heat transfer - cannot stop radiant heat. • Resistant to acid rain, UV rays, Saline atmosphere & condensation. Application • Buildings • Steam Pipelines • Oil & Gas Storage Tanks • Refrigerated Cold Storage Facilities • Mobile & Modular homes • Roofs • Wall Facade Coatings • Commercial Buildings • Pipes

We are offering bituminous water proofing coating. Building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • externalinteriorwalls

Polyurethane Based Waterproofing Coatings

We are offering polyurethane based waterproofing coatings building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Siloxane Based Hydrophobic Water Repellent Coating

We are offering siloxane based hydrophobic water repellent coating building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

We are offering silane based hydrophobic water repellent coating building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Rain protective acrylic coating building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Food Grade Waterproofing Coating Building protects us from nature forces like rain, heat, cold, wind etc., The concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., The consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced MonoProof waterprooing systems cover every need of Building & Construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic SBR latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • Excellent resistance to hydrostatic pressure. • Reduces water and chemicals permeability • Protection from water ingress at high water table areas • Protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • Can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • Retaining walls • Foundation walls • Parking decks • Garden roofs • Cooling tower • Terrace • Basement Foundation • Under ground Tank • Overhead Tank • Reservoir • Ponds & Pools • Drink & Clean water storage tanks • Roofs • Balconies • Wet rooms like bathrooms • kitchens • Tunnels • Podiums • External Interior Walls

We are offering terrace waterproofing coatings building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Anti Static Floor Coatings The flooring is most operational part of any Industrial, Commercial, Residential or Institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's FloorClad Screeds & Toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • EpoxyPolyurethane PrimersDamp-tolerant & Oil insensitive Primers for Metal & Concrete Surfaces • Epoxy PolyurethaneHybrid PUAcrylic based Re - Lay Over - Lay Roller Floor Toppings • Epoxy based mortars for floor patch repairsfloor screeds • Polymer modified Cementitious mortars for floor patch repairsself-leveling floor screeds • High Performance Self Leveling Floor Toppings - 0.5mm to 5mm • Ancillary Flooring Products like epoxy covings, floor markings etc.,

Conductive Floor Coatings The flooring is most operational part of any Industrial, Commercial, Residential or Institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's FloorClad Screeds & Toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • EpoxyPolyurethane PrimersDamp-tolerant & Oil insensitive Primers for Metal & Concrete Surfaces • Epoxy PolyurethaneHybrid PUAcrylic based Re - Lay Over - Lay Roller Floor Toppings • Epoxy based mortars for floor patch repairsfloor screeds • Polymer modified Cementitious mortars for floor patch repairsself-leveling floor screeds • High Performance Self Leveling Floor Toppings - 0.5mm to 5mm • Ancillary Flooring Products like epoxy covings, floor markings etc.,

Heat reflective coatings for industries all the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch’s ozoprotect heat solar reflective coatings reflects up to 98% of heat back to its source. Monarch's ozoprotect specialized coating containing ceramic microspheres and or glass microspheres keeps you cooler in the summer and warmer in the winter reducing cooling cost during summer months and heating cost during winter months. The load reduction of air conditioning or heater and corresponding electrical consumption saves energy cost up to 40% all round year. The payback period is less than 6 months. Ozoprotect significantly contributes to green building certification as solar reflectance index (sri) is 116 and prevention of global warming besides reducing evaporation loss in petroleum storage tanks. Features • reflects 98% of heat in roofs ceilings walls. • reduces internal temperature of building up to 15°c. • reduces evaporation losses, pollution, smog, the urban heat island effect and global warming. • quick payback period - saves over inr 5200 year for every 1°c temperature reduction – saves over 40% in energy bills for air conditioner heaters. • conventional insulation system only slows the rate of heat transfer - cannot stop radiant heat. • resistant to acid rain, uv rays, saline atmosphere & condensation. Application • buildings • steam pipelines • oil & gas storage tanks • refrigerated cold storage facilities • mobile & modular homes • roofs • wall facade coatings • commercial buildings • pipes

Water storage tank coatings building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features excellent resistance to hydrostatic pressure. Reduces water and chemicals permeability protection from water ingress at high water table areas protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates

Heat protective coating all the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch’s ozoprotect heat solar reflective coatings reflects up to 98% of heat back to its source. Monarch's ozoprotect specialized coating containing ceramic microspheres and or glass microspheres keeps you cooler in the summer and warmer in the winter reducing cooling cost during summer months and heating cost during winter months. The load reduction of air conditioning or heater and corresponding electrical consumption saves energy cost up to 40% all round year. The payback period is less than 6 months. Ozoprotect significantly contributes to green building certification as solar reflectance index (sri) is 116 and prevention of global warming besides reducing evaporation loss in petroleum storage tanks. Features • reflects 98% of heat in roofs ceilings walls. • reduces internal temperature of building up to 15°c. • reduces evaporation losses, pollution, smog, the urban heat island effect and global warming. • quick payback period - saves over inr 5200 year for every 1°c temperature reduction – saves over 40% in energy bills for air conditioner heaters. • conventional insulation system only slows the rate of heat transfer - cannot stop radiant heat. • resistant to acid rain, uv rays, saline atmosphere & condensation. Application • buildings • steam pipelines • oil & gas storage tanks • refrigerated cold storage facilities • mobile & modular homes • roofs • wall facade coatings • commercial buildings • pipes

Heat solar reflective coatings for walls and roofs all the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch’s ozoprotect heat solar reflective coatings reflects up to 98% of heat back to its source. Monarch's ozoprotect specialized coating containing ceramic microspheres and or glass microspheres keeps you cooler in the summer and warmer in the winter reducing cooling cost during summer months and heating cost during winter months. The load reduction of air conditioning or heater and corresponding electrical consumption saves energy cost up to 40% all round year. The payback period is less than 6 months. Ozoprotect significantly contributes to green building certification as solar reflectance index (sri) is 116 and prevention of global warming besides reducing evaporation loss in petroleum storage tanks. Features • reflects 98% of heat in roofs ceilings walls. • reduces internal temperature of building up to 15°c. • reduces evaporation losses, pollution, smog, the urban heat island effect and global warming. • quick payback period - saves over inr 5200 year for every 1°c temperature reduction – saves over 40% in energy bills for air conditioner heaters. • conventional insulation system only slows the rate of heat transfer - cannot stop radiant heat. • resistant to acid rain, uv rays, saline atmosphere & condensation. Application • buildings • steam pipelines • oil & gas storage tanks • refrigerated cold storage facilities • mobile & modular homes • roofs • wall facade coatings • commercial buildings • pipes

Single component waterproofing coatings building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

We are offering epoxy based damp proof waterproof coating building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Silicone Water Repellent Coatings Building protects us from nature forces like rain, heat, cold, wind etc., The concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., The consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced MonoProof waterprooing systems cover every need of Building & Construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic SBR latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features Excellent resistance to hydrostatic pressure. Reduces water and chemicals permeability Protection from water ingress at high water table areas Protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sul

We are offering epoxy waterproofing coatings building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interiorwalls

We are offering Concrete Waterproofing Coatings. Building protects us from nature forces like rain, heat, cold, wind etc., The concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., The consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future.

waterproof coatings for concrete Building protects us from nature forces like rain, heat, cold, wind etc., The concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., The consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future.

Tunnel construction building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc., the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future.

Polyurethane based Waterproofing Coatings to long term exposure of UV rays and provides an easily cleaned coating. The cured !lm shall be protected with concrete screed mortar when used on accessible roofs to avoid damage from foot traffic.

Rain protective and acrylic anti-carbonation Waterproofing It is used as a waterproofing protective coating for exterior walls of the concrete masonry buildings because it forms higher film thickness, has excellent "exibility, breathing properties, water resistance, crack-bridging ability, weathering durability and anexcellent resistance tothegrowthof microorganisms.

Bituminous Waterproofing Coating is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but fiexible waterproofing membrane. Theyalsomeetthe requirements for coatings suitable for useonsurfaces in contact with potablewater.

High Performance acrylic polymer modified elastomeric waterproofing is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durablewater tight coating which cannot be easily damaged orworn away.

Water Based Poly urethane Water Proofing Coatings It cures to a permanently flexible seamless membrane that has good adhesion to a wide range of substrates unlike more traditional bitumen based products. The coating is crack-bridging, does not readily embrittle with age, exposure to ultra violet radiation or weathering, and hence it does not crack or craze due to its flexible properties. It is elastomeric and hence not adversely affectedby extremesof temperature.

Solvent BasedWater Repellent Coating in reducing efflorescence due to soluble salts in brickwork.The coating is colorless and preserves natural color and texture of createdmaterial. It penetrates intoconcrete for aminimum depth of penetration of 5mm ensuringhy drophobic zone. Permeability is low to water, salt solution, dust and soot particles.

Solvent free clear epoxy coating is a solvent free, 100% Solids High Build Epoxy Coating, comprising of two clear top coats each top coat to be a minimum of 200 microns thick. It is ideally suited for use where high clarity and tough finish is required and without affecting the aesthetic appeal of the substrate like tiles, granites, marbles, stones etc., It can also be used as a clear finish over previously coated concrete floors.

Water dispersed epoxy coating and sealer is a water dispersed epoxy coating designed for damp tolerant, anti-fungal and water vapor permeable coating.The product is odorless and can be appliedonto cementitious and concrete surfaces providing dustproof coatings. The cured !lm is easily cleanable and resistant to penetration of oils and liquids. The product forms a waterproof barrier and is non-toxic. It is resistant to corrosion, chemicals and abrasion. It is additionally used as a thin coat application for the areas subject to light vehicle and pedestrian traffic. The product is ideal for contact with water intended for human consumption. The water permeability allows it to be applied on damp substrates and green concrete. However this should not be subjected to flowing running waterover watered conditions.

• Thickness 200 microns.

Decorative and aesthetic epoxy resin floor coating is easily cleaned, attractive floor coating in areas where high resistance to chemical attack is required. It can also be used as a final coating and sealer for epoxy floor screeds to provide a more durable and easily cleaned surface for application in two coats to achieve a total dry film thickness of 200 microns.

• thick 400 microns

Epoxy Polyurethane based Floor Toppings, Roller Coatings is a hybrid polyurethane based, resin floor coating for use in wide range of industrial environments where a lasting to low maintenance floor is required. It is ideally suited for use in areas where a high degree of resistance to chemicals, oils and grease is required.The product comprises of two top coats each top coat to be a minimum of 400 microns thick.

Heat resistance Ceramic based Mat Finish Coatings (ThermoKote 810 Blue) Heat resistance till 810°C (Ceramic based Mat Finish ) The corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch ThermoKote range High Temperature Coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°C (1832°F). The coatings can even be sprayed to hot surface till 120°C (248°F). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

All the materials used for construction of building absorb and transfer heat inside of the building all the day. In most countries, energy use in the buildings sector for heating cooling represents about one third of the total energy consumption. Heat always flow from warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter transferred through the walls, ceilings and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat.

Epoxy Solvent Base Pigmented Floor Toppings Roller Coatings

We are offering epoxy solvent base pigmented floor toppings roller coatings.

Moisture Compatible/ Tolerant Epoxy Coating

We are offering Moisture Compatible/ Tolerant Epoxy Coating.

Self levelling 5 mm floor coatings floorclad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. it provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any industrial, commercial, residential or institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's floorclad screeds & toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • epoxypolyurethane primersdamp-tolerant & oil insensitive primers for metal & concrete surfaces • epoxy polyurethanehybrid puacrylic based re - lay over - lay roller floor toppings • epoxy based mortars for floor patch repairsfloor screeds • polymer modified cementitious mortars for floor patch repairsself-leveling floor screeds • high performance self leveling floor toppings - 0.5mm to 5mm • ancillary flooring products like epoxy covings, floor markings etc.

Self Levelling 3 mm floor coatings Floor Clad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. It provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any Industrial, Commercial, Residential or Institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's FloorClad Screeds & Toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • EpoxyPolyurethane PrimersDamp-tolerant & Oil insensitive Primers for Metal & Concrete Surfaces • Epoxy Polyurethane Hybrid PUA crylic based Re - Lay Over - Lay Roller Floor Toppings • Epoxy based mortars for floor patch repairs floor screeds • Polymer modified Cement itious mortars for floor patch repairsself-leveling floor screeds • High Performance Self Leveling Floor Toppings - 0.5mm to 5mm • Ancillary Flooring Products like epoxy covings, floor markings etc.

Self leveling poly urethane floor toppings 1.5 -2mm floor coatings floorclad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. it provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any industrial, commercial, residential or institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's floorclad screeds & toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • epoxypolyurethane primersdamp-tolerant & oil insensitive primers for metal & concrete surfaces • epoxy polyurethanehybrid puacrylic based re - lay over - lay roller floor toppings • epoxy based mortars for floor patch repairsfloor screeds • polymer modified cementitious mortars for floor patch repairsself-leveling floor screeds • high performance self leveling floor toppings - 0.5mm to 5mm • ancillary flooring products like epoxy covings, floor markings etc.

Self levelling 2 mm floor coatings floorclad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. it provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any industrial, commercial, residential or institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's floorclad screeds & toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • epoxypolyurethane primersdamp-tolerant & oil insensitive primers for metal & concrete surfaces • epoxy polyurethanehybrid puacrylic based re - lay over - lay roller floor toppings • epoxy based mortars for floor patch repairsfloor screeds • polymer modified cementitious mortars for floor patch repairsself-leveling floor screeds • high performance self leveling floor toppings - 0.5mm to 5mm • ancillary flooring products like epoxy covings, floor markings etc.

Self Leveling 1 Mm floor coatings Floor Clad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. It provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any Industrial, Commercial, Residential or Institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's FloorClad Screeds & Toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • EpoxyPolyurethane PrimersDamp-tolerant & Oil insensitive Primers for Metal & Concrete Surfaces • Epoxy PolyurethaneHybrid PUAcrylic based Re - Lay Over - Lay Roller Floor Toppings • Epoxy based mortars for floor patch repairsfloor screeds • Polymer modified Cementitious mortars for floor patch repairsself-leveling floor screeds • High Performance Self Leveling Floor Toppings - 0.5mm to 5mm • Ancillary Flooring Products like epoxy covings, floor markings etc.

Self levelling floor coatings floorclad is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. it provides a dense, impervious, colored and chemically resistant floor surface which is hygienic and easy to clean. It provides a smooth, light-reflective surface. The product is recommended for light duty foot, trolley, pallet truck and rubber wheeled forklift traffic. The flooring is most operational part of any industrial, commercial, residential or institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing , anti-bacterial and permeability to liquids. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water and other fluids enter into concrete, the reinforcing steel corrodes. To sustain and maintain the industrial floor a protection is must. Monarch's floorclad screeds & toppings offers seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement. The comprehensive range covers • epoxypolyurethane primersdamp-tolerant & oil insensitive primers for metal & concrete surfaces • epoxy polyurethanehybrid puacrylic based re - lay over - lay roller floor toppings • epoxy based mortars for floor patch repairsfloor screeds • polymer modified cementitious mortars for floor patch repairsself-leveling floor screeds • high performance self leveling floor toppings - 0.5mm to 5mm • ancillary flooring products like epoxy covings, floor markings etc.

Epoxy Solvent Base Pigmented Floor Toppings Roller Coatings

We are offering epoxy solvent base pigmented floor toppings roller coatings.

Fire strikeswhenleast expected.The speed at which the fire travels or propagates even a small accidental fire or electric spark caused by short circuit is sufficient to create huge, immeasurabledamageto the safety of people and properties.The fire can start fromexternal source or internal source, just from anywhere and without warning. Fire takes advantage of unprotected surfacesandareas concealed fromfire fighters. The consequences - overwhelming heat, suffocating smoke, loss of time, damage to items of sentimental value and above all, the loss of life. The insurance company may able to replace the materialgoods, but there are fewthings thatmoneysimply cannot replace. The conventional paints coated over structural steel, concrete andwooden surfaces are flammable and indeed act as a fuel which aid in spreading of fire. The intense heat conducted through metal ignites the paint and combust spontaneously even if not subjected to a flame directly. In the event, of f ire , the winning time is crucial in evacuating the peopleandlimiting theamount of structuraldamage.There isnosecondchance with the fire. Onehas todoit right first time.

Heat resistance Aluminium Coatings (ThermoKote ALU 210) The corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch ThermoKote range High Temperature Coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°C (1832°F). The coatings can even be sprayed to hot surface till 120°C (248°F). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

Heat resistance till 210°C ( Black ) Heat resistance Black Coatings (ThermoKote BLA 210) The corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch ThermoKote range High Temperature Coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°C (1832°F). The coatings can even be sprayed to hot surface till 120°C (248°F). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

Heat resistance po red coatings (thermokote por 210) heat resistance till 210°c (po red) the corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch thermokote range high temperature coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°c (1832°f). The coatings can even be sprayed to hot surface till 120°c (248°f). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

Heat resistance po red coatings (thermokote 1000 alu) heat resistance till 1000°c the corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch thermokote range high temperature coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°c (1832°f). The coatings can even be sprayed to hot surface till 120°c (248°f). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

Heat resistance po red coatings (thermokote por 610) heat resistance till 610°c (po red) the corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch thermokote range high temperature coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°c (1832°f). The coatings can even be sprayed to hot surface till 120°c (248°f). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.

Heat resistance black coatings (thermokote bla 610) heat resistance till 610°c ( black )) the corrosion protection of high heat areas associated with high temperatures is the perennial problem to the industry. Monarch thermokote range high temperature coatings protect the steel structural against atmospheric corrosion and under insulation corrosion up to 1000°c (1832°f). The coatings can even be sprayed to hot surface till 120°c (248°f). The excellent resistance to thermal shock as a result of rapid temperature cycling, extends life expectancy of assets.