Write a Review
Our Product / Services
GPS, Navigation & Tracking Devices
2 Products availableOur offered Product range includes Touch Panel Computer, Industrial Isolation, Multi Recharge and Fanless PC Mini PC Celeron - MBOX-520-i5-4R-500H.
Standards: EIA RS-232C, RS-485, RS422 standardRS-232 signal: TX, RX, GNDRS-422 signal: T+, T-, R+, R-, GNDRS-485 signal: D+, D-, GNDWorking mode: Asynchronism, point to point, 2 wire half-duplex, 4 wire full duplexBaud rate: 300115200bps, auto test serial signal rate detect signal speed automatically, zero delay timeFlow control: Data direction auto-turnaround, no flow control is requiredTransfer distance: RS-485/422 side:1.8Km(9600bps)RS-232 side: no less than 15mLoading: Support 256 nodes loopbackOptical isolation: 3000VPort protection: 600W surge protection, 15KV ESD protectionConnector: 5 bit terminal block
PowerPower input: 220VACConsumption: 5W
EnvironmentOperating temperature: -10C to 60CStorage temperature: -40C to 85CHumidity: 5% to 95%(no condensation)
AppearanceDimensions: 227.0mm146.0mm43.0mmMaterial: PlasticColor: BlackWeight: 1000g
Warranty: 3 years
Approvals: FCC, CE, RoHS approvals
The multifunctional GPS Vehicle Tracker (GT06N) is the best-seller among Concoxs products. Being the best-seller in Concoxs products, GT06N more than looks different but has many special functions appealing to customers. GT06N is a mini and original GPS car and truck tracker with internal battery. It can be installed in the shelters on cars or trucks.MAIN FUNCTIONS1.Tele-cut off (petrol / electricity) functionYou can track your vehicles through sending messages on the platform in the case of its being stolen.2.Geo-fence functionIt is unnecessary to worry about your car being stolen and cannot being back because when your car is moved out of the Geo-fence the alarm will start and you can track your car through the platforms.3.SOS alarmYou can alert your alarm in the case of your being robbed or other dangerous ones.
Hardware Specification Weight 96gDimensions 90 (L)52 (W)15 (H)mmWorking voltage/current 9-36VDC/90mAOperation temperature -25- 60Operation humidity 5% to 95% non-condensingLED indicator Three LED indicator: GPS-blue, GSM-green, Power-redGSM 850/ 900/ 1800/ 1900 MHzGPRS Class12, TCP/ IP build in GSM ModuleGPS MT3326GSM antenna Built-in quad bandGPS antenna Built-in GPS high gain ceramics patch antenna.GPS Channels 20Tracking sensitivity -159dBmAcquisition sensitivity -144dBmLocating time cost Hot start:
Size:400*124(front panel)metal keyboard integrated touchpad, with front panel of 400*124mm, suitable for outdoor or in door self-service terminals, industrial control etc.
Specially designed for harsh environment, use the brushed stainless steel material, and special water proof design, IP 65 protect class, it has good performance of water proof, dust proof and vandalism proof, which make it a good choice for public use or harsh environment.Silicone switching elements, good tactile feedbackSensitive touchpad as cursor deviceRack-mount version makes it easy to installLaser engraved characters for excellent durableNo removable keycapsFriendly layout and any language is available and its free of additional charge
Number of Keys: 63+2 keysMaterial: stainless steel (front panel) and alumina alloy (scaleboard)Key travel:1.5mmkeyswitch lifespan: more than 10 million of operations.Keyswitch technology: silicone switchingKey graphics: laser engraved legends & characters in durable paintMounting syle: rack mountG.W.: 1.35KGsDimensions: 400mm x 124mm (front panel)Supply Voltage: +5V DC +/-5%Communication interface: USB or PS2 (optional)Protection Level: IP65(front panel)Operating temperature:-40 +70Storage temperature: -50 +80CE FCC RoHS CompliantOS support:DOS/Windows95/98/NT/ME/2000/2003/XP/Vista/7, Linux, Mac, etcMTBF >50000HMTTR
1 Support IEEE802.3, 802.3u/802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W
2 Support 16 10/100/1000Base-TX Ethernet electrical ports, 8 Combo optical & electrical ports, 4 1000Base-FX optical ports
3 8K MAC table size
4 Backplane bandwidth 56Gbps
5 Back pressure and flow control prevent data package loss under high network load
6 SW-Ring patented technology, support Single, Couple, Star, Double-star, failover time < 20ms
7 Support MAC auto learning, auto aging
8 Support WEB page configuration, import and export of configuration file
9 Support port status display, port data update
10 Support link trunking
11 Support port isolation
12Support port-based VLAN, MAC-based VLAN, protocol-based VLAN
13 Support GMRP, IGMP Snooping, and static multicast
14 Support STP, RSTP, MSTP
15 Support network security management, access control
16 Support 802.1x certification
17 Support remote network monitoring
18 Support multi-port mirroring, single port mirroring, and network diagnosis
19 Support rate control, broadcast, unknown multicast, unknown unicast storm control
20 Support LLDP, QoS, DHCP Server, DHCP-monitor, ACL, loop back
21 Support password management and static address lock
22 Support 1 power input, and 1 relay alarm output
23 Industrial design, -40-75 working temperature
24 Solid aluminum plate shell
25 Fanless design
26 IP40 protection grade, 19" standard rack-mounted
Specification
Technology
Standard: IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z, IEEE802.1Q, IEEE802.1p, IEEE802.1W
Protocol: ARP, ICMP, TCP, DHCP, DNS, HTTP, Telnet, RSTP, MSTP, LLDP, LACP, IGMP, GMRP, SNMP
Flow Control: IEEE802.3x flow control, Back Pressure
Function
Switch Functions: SW-Ring, QOS, VLAN, MSTP, SNMP, ACL, LLDP, RMON, DHCP, GMRP, IGMP Snooping, link trunking, static multicast, port mirroring, port isolation, bandwidth management, storm control, port traffic statistics, online update, up and download configuration file, user name access system
SW-Ring: Single, Couple, Chain, Dual homing
Interface
Electrical port: 10/100/1000Base-TX self-adaptive RJ45 port, full / half duplex or forced working mode, support MDI/MDI-X self-adaptive
Optical port: 1000Base-FX
Alarm port: 2 bits 7.62mm terminal block
1 relay alarm message output
Console port: CONSOLE management port
Transmission distance
Twisted pair: 100M (standard CAT5/CAT5e cable)
Optical: Multi-mode 850nm/2Km
Multi-mode 1310nm/2Km/5Km
Single-mode 1310nm/20/40/60Km
Single-mode 1550nm/80/100/120Km
Switch Properties
1000M forward speed: 1488100pps
Transmit mode: store and forward
Switched bandwidth: 56G
Buffer: 1.5M
MAC table size: 8K
Indicator
Power indicator: PWR
Alarm indicator: ALARM
Run status indicator: RUN
Port connection / run status indicator: (1-28)
Power Supply
Input voltage: 220VAC (100240VAC)
Terminal block: 3 bits terminal block
No-load power: 13.3W@220VAC
Full-load power: 26.5W@220VAC
Physical Characteristics
Shell: IP40 protection grade, metal shell
Installation: 19" rack-mounted
Weight: 2950g
Size (H*W*D): 441.6mm208.9mm44.6mm
Working Environment
Working temperature: -4075
Storage temperature: -4085
Humidity: 0%95% (no condensation)
Industry Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Leve4
EN61000-4-4 (EFT), Level 3
EN61000-4-5 (Surge), Level 4
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
Warranty period: 5 years
Certification
CE, FCC, RoHS, UL508 (pending)
Standards: EIA RS-485 standardRS-485 signal: D+, D-, GNDTTL signal: IN, OUT, GNDBaud rate: 300115200bpsTransfer distance: 5V TTL side: 3mRS-485 side: 1.2KmConnectors: RS-485 Side: DB9 Male or 5 Way Terminal Block5V TTL Side: DB9 Male or 5 Way Terminal BlockPort protect: 600W surge protection, 15KV ESD protection
PowerPower: 5V external power
EnvironmentOperating temperature: -10C to 60CStorage temperature: -40C to 85CHumidity: 5% to 95%(no condensation)
AppearanceDimensions: 62.8mm33.8mm17.8mm99.8mm34.1mm17.6mm (with terminal block)Weight: 24g (with terminal block: 50g)
Warranty: 3 years
Approvals: FCC, CE, RoHS approvals
GW1102-2D(RS-485) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.
1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-485/4224.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -4075
Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-485/422RS-485 signal: D+ (A), D- (B)RS-422 signal: T+, T-, R+, R-Parity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps115200bpsRS-485/422 transfer distance: 1200mRS-485/422 connector: 5 bits terminal blockProtection: class 3 staticMaster mode: 32 TCP slavesSlave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1TX2, RX1RX2;Power requirementsInput voltage: 948VDCNo-load consumption: 0.90W@9VDCFull-load consumption: 1.25W@9VDCEnvironment limitsWorking temperature: -4075Storage temperature: -4085Relative humidity: 5%95%non-condensingMechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 250gSize (LWH): 100mm69mm22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6
WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-485)-P(948VDC) 12. User manual 13. Straight network cable 14. Power adapter 15. CD 16. Warranty card 17. Certificate of quality1Optional accessories:DIN-Rail Mounting Kit (35mm) 1
ES1024 support 24 port 10Base-T/100BaseTX ; no fan, low consumption, industry 4 grade design, can adapt rugged industry environment; 070 working temperature can satisfy some requirements of industry filed, can provide economical solution for your Ethernet connection.
Features
1. Support IEEE802.3/802.3u/802.3x
2. Support auto-consult function
3. Support MDI/MDI-X self-adaption
4. Support 8K MAC address table
5. 0-70 working temperature
6. No fan, low consumption
7. IP40 protection class
8. 1U 19 inch rack mount
Interfaces
* Mobile Ports: 32 ports GSM/CDMA channels
* Two(2) 10/100Mbps Ethernet Interface (2xRJ45)
* USB: 1 port
Voice Processing
* Voice Codec: G.711a/u law, G.723.1, G726, G.729AB
* QoS: Diff Serve, ToS, VAD, PLC, CNG
Call Features
* Calling Type: Terminate/Originate calls
* IVR Voice Prompt: Two stage dialing, Customized IVR
* Call handling: One stage dialing, Configurable dial plan
* DTMF: RFC2833, SIP
Mobile Features
* General Feature: SMS, USSD, IMEI/PIN modify, Call minutes restriction, Carrier select, BCCH, Reversal Polarity Network
* Network Mode: NAT router or switch mode
* Network Protocols: IP, TCP, UDP, TFTP, FTP, RTP, RTCP, ARP, RARP, ICMP Ping, NTP, SNTP, Http, DNS, PPPoE, DHCP
* NAT traversal: Static NAT, STUN
Protocal
* Protocol: SIP V2.0 RFC3261
* SIP Characteristics: By port/device registration, Two 183 mode
Configuration Management
* Management: TFTP, HTTP, Sys log, CDR
* Web GUI: Configuration, firmware upgrade, call status, Configuration backup/restore
Hardware Specifications
* Power Supply:AC100240V 50/60HZ DC12V/1A
* Temperature: 040 (Operation), -2080 (storage)
* Humidity: 5%90% RH,
* Power Consumption: 35W
* Dimensions: 440(W) x 250(D) x 230(H) mm
* Net weight: 7.0kg
The multifunctional GPS Vehicle Tracker is the best-seller among Concoxs products. Being the best-seller in Concoxs products, more than looks different but has many special functions appealing to customers. is a mini and original GPS car and truck tracker with internal battery. It can be installed in the shelters on cars or trucks.
MAIN FUNCTIONS
1.Tele-cut off (petrol / electricity) function
You can track your vehicles through sending messages on the platform in the case of its being stolen.
2.Geo-fence function
It is unnecessary to worry about your car being stolen and cannot being back because when your car is moved out of the Geo-fence the alarm will start and you can track your car through the platforms.
3.SOS alarm
You can alert your alarm in the case of your being robbed or other dangerous ones.
Rack Mount Industrial Monitors that are available in wide range of specifications and affordable prices. These rack mount industrial monitors are popular among our clients since they have great input signals, quality control and power supply. These industrial monikers support have inbuilt support for various widows operating system such as windows xp, windows 98 , windows 2000 etc. These industrial monitors have signal controls and internal stereo speakers.
Features:
Good function control
Packaged according to the industry norms
Exquisite layout
Features:
lIntelBay-trail J19002.0 GHz Quad core, Max 2.4GHz
l8TFT LED screen
lResistive touch screen industrial panel pc
lFully-sealed fanless design, suitable for harsh industrial environment applications
l2G memory (DDRIII)on board, Max4GBoptional
l1*USB3.0 + 3*USB 2.0
l4*RS232 (1 x RS422/RS485 optional)
l1*VGA
l2*Intel i211 GbE RJ45
l924V wide-range DC input
lColor:Silver/Black/White
1. 12.1" SVGA TFT LCD Panel support 800x600 pixels2. Open frame structure with strengthen glass3. Rugged construction design Input signal : VGA4. 250 cd/m2 brightness OSD control keys to optimize the display5. AC 100-220V wide range external ac adapter6. Panel mounting with clip7. Meet standard VESA hole ( 75x75 and 100x100 mm ), support desk top stand / wall mount / swing arm mounting
Optional1. DC power input ( 8 -28V dc input )2. Touch Screen
1 Supports Intel core i7/i5/i3/Pentium ATX mother board2 Intel Sandy/Ivy Bridge LGA1155 ? 4*240Pin DIMM DDR?1066/1333/1600MHz, Max up to 16Gb3 2*USB3.0, 10*USB 2.0 ? 2*SATAIII, 4*SATA?4 Supports both VGA+DVI
IntroductionATX-B75P is Intel ATX mother board based on Intel core i7/i5/i3/Pentium, Intel Sandy/Ivy Bridge LGA1155, adopt to Intel Chipset, with very stable performance. Can be used for industrial computer, workstation, etc.
GW1102-2D(RS-232) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-232 serial (RJ45) and 1 port 10/100M Ethernet.
Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.
The products using EMC protection design, can work in rugged environment.
1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol
2.Support 1 port 10/100M Ethernet
3.Support 2 Port RS-232
4.Support WEB and Telnet configuration
5.Convert between Modbus TCP and Modbus RTU/ASCII
6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes
7.Support ID mapping function, to achieve the management of the host ID
8.300bps115200bps baud rate and nonblocking communication
9.Support IP address and MAC address filtering function
10.Slave mode support 16 TCP master connections
11.Master mode support 32 slave TCP connection requests
12.Support Response Timeout and Interval Timeout setting
13.Support cross-gateway and cross-router communication
14.IP30 protection grade, metal shell, wall mounted installation
15.No fan, low consumption design
16.Working temperature: -4075
Ethernet port
Standard: 10Base-T, 100Base-TX
Protocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Transfer distance: 100m
Connector: RJ45
Serial port
Serial port number: 2 ports RS-232
RS-232 signal: TXD, RXD, RTS, CTS, GND
Parity bit: None, Even, Odd, Space, Mark
Data bit; 7bit, 8bit
Stop bit: 1bit, 2bit
Baud rate: 300bps115200bps
RS-232 transfer distance: no more than 15m
RS-232 connector: RJ45
Master mode: 32 TCP slaves
Slave mode: 16 TCP masters
Work mode: RTU Slave, RTU Master, ASCII Slave, and ASCII Master
LED Indicator
Power (PWR)
Ethernet port connect status (Link)
Serial port data indicator: TX1TX2, RX1RX2;
Power requirements
Input voltage: 948VDC
No-load consumption:0.79W@9VDC
Full-load consumption:0.86W@9VDC
Environment limits
Working temperature: -4075
Storage temperature: -4085
Relative humidity: 5%95%(non-condensing)
Mechanical
Shell: IP30 protection, metal shell
Installation: Wall mounting
Weight: 230g
Size (LWH): 100mm69mm22mm
Standard
EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS: EN 61000-4-2 (ESD), Level 3
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty
Warranty time: 3 years
Certificates
CE, FCC, RoHS, UL508 (pending)
Packing List
1. GW1102-2D(RS-232)-P(948VDC) 1
2. User manual 1
3. Straight network cable 1
4. Power adapter 1
5. CD 1
6. Warranty card 1
7. Certificate of quality1
Optional accessories:
DIN-Rail Mounting Kit (35mm) 1
Industrial Box PC with Full IP65 main features Intel Core i7-3555LE 2.50GHz Intel Express Chipset HM76
Aluminum Profile with Fin
Ultra compact size with Fanless Design
Support mSATA SSD and micro SD card
One mini-PCIe socket expansion
936V DC with isolation
Mootek Technologies (Mootek Technologies)
N. No. 10, O. No. 14, 2nd Floor, Aranganathan Subway Road Kaveri Nagar, Saidapet, CIT Nagar, Chennai - 600015, Dist. Chennai, Tamil Nadu, India
Share us via
