Our Products #5803526

Copra dryers are suitable for drying very efficiently. Traditional method of drying is usually sun drying which produces low quality oil. Our dryers offer the benefit of high quality oil and reduced drying time. Our principle of drying is by using a heat exchanger that produces hot air which is diverted by a blower to a copra drying chamber via a duct. The fluid to be heated which is air is sucked through the narrow circular opening on the outer chamber. The brick oven is heated using dried coconut husk or any other fuel which in turn heats the steel enclosure of the oven. Fresh air is passed through the inner chamber thereby absorbing heat from the steel enclosure of the oven and finally passes through the blower casing and into the copra chamber. In order to minimize heat loss ducts are covered in heat insulations material such as fibre glass or mineral wool thereby maintaing average temperature in the chamber. Digital heat indicator system displays the temperature inside the chamber as well as in the blower casing.All materials used for construction of dryer and smoke chimney are of high grade mild steel with proportional thickness. Our offer is not only limited to the dryer but we also undertake the civil works for constructing the drying chamber as well. We offer high quality fire bricks and high grade grills for the chamber so that heat losses are minimized along with superior strength for supporting the nuts.

The heat exchanger portion consists of two distinct chambers. The inner chamber enclosing the oven which is the source of heat and the outer chamber which is the source of outside air. The heat exchange principle is basically indirect type contact transferring heat to the surrounding air by conduction and convection methods.

The arrangement consists of a cylindrical rotating drum into which the coconut powder is fed using a hopper. Hot air for the drying process can be produced either by mechanical means using a heat exchanger or by electrical means using a heating element.

This equipment serves the purpose of extracting coconut milk using screw press technology. The machine is very user-friendly, reliable and robust and requires low power and labour.The rotational speed is very moderate ensuring a noise free and positive working environment. All contact parts of the machine are SS304 which is resistant to corrosion and food safe. The byproduct which is the dessicated coconut powder can be used as an ingredient in food and bakery products and has a commercial value.

Separation takes place inside a cylindrical drum surrounded by a mesh to filter any residual coconut gratings. The screw conveyer is fixed at both sides by strong bearings inside the drum. Coconut gratings are dropped at the feed hopper which is transported by the screw conveyer to the other sided of the drum squeezing the gratings during the process. The separated coconut milk will fall through the mesh and will be collected at the collecting pan. The residual sludge will be collected at the opposite side of the drum.

We have been manufacturing precision engineered range of Stainless Steel Storage Tanksthat are in confirmation with various industrial standards. Customized as per the specifications of our clients, these are appreciated for superior quality and excellent functionality.

• 300 Grade Stainless Steel, Carbon Steel
• Design: Custom Designs or Standard Designs
• Tank Sizes: 500 Lts to 20, 000 Lts
• Configurations: Vertical, Horizontal, Above Ground, Underground, Tubular

All materials used are stainless steel AISI 304L or AISI 316L (DIN 1.4404) in standard. Other stainless steel types are available.

Inside and outside surface finish as specified.

• Vertical or horizontal models.
• Single jacket or double jacket for cooling with refrigerant, ice water or glycol or heating with hot water or steam.
• Until 20.000 l wall and bottom of the tanks are insulated with polyurethane foam in our workshop and finished with a stainless steel jacket. Larger vessels are usually insulated on site with rock wool and aluminum or stainless steel cladding.
• Top and bottom: conical (inclination depending on the volume) or spherical (for aseptic or pressure vessels).
• Adjustable legs with rest plates.

The centrifugal milk extractor has a cloth sack that rotates at high speed.The sack is filled with coconut meat and due to high centrifugal forces the milk is separated from the meat. However the meat is not fully extracted and the residue from the sack if fed to a Screw Press extrator that effectively squeezes out the remaining milk that is contained in the residue. The machine is very user-friendly, reliable and robustand requires low power and labour.The rotational speed is very moderate ensuring a noise free and positive working environment. All contact parts of the machine are SS304 which is resistant to corrosion and food safe.

Finely cut coconut gratings are fed into a bag and then inserted into the bowl by opening the lid. A fine mesh inside the bowl prevents the gratings from entering the coconut milk collecting area. While rotating the the bowl at high speed coconut milk is collected at the collecting area.

Disintegration converts the coconut meat to powdered form.Powdered coconut is sold in the form of dessicated coconut powder after drying.Our disintegrator equipment is an impact pulverizer with hammer heads that converts the meat to powdered form.It is a versatile unit of heavy and rugged construction.All contact parts are made of SS304 steel which is food grade.

The pulverizer consists of an encased rotor carrying hammers that are capable of crushing and grinding the coconut meat into fine powders. A fine mesh underneath the rotor casing filters the coconut gratings. The fine coconut powder is collected at the collecting area below the mesh.

This equipment serves the purpose of extracting Virgin Coconut Oil from coconut milk.The centrifuge marks the final stage in the process of extracting VCO and as the name implies centrifugal method is used for this process. A unique feature of this process is that it utilizes non heat method of extraction also called cold processing. Heated methods can destroy many vital nutrients that act as natural preservatives during storage. Cold processing technology retains oils natural properties and nutritional values. All contact parts of the machine are SS304 which is resistant to corrosion and food safe.

Coconut milk if fed at the inlet located at the bottom of the bowl. The bowl is connected to a motor and separation takes place inside the rotating bowl at a speed of 15, 000 rpm.The basic principle is that the difference in densities of two immiscible liquids forces the liquid with higher density outside the rotation axis. The heavier liquid phase is forced towards the bowl while the light phase is force inside. Special openings at the top of the bowl separate Virgin Coconut Oil and water at two outlets at the top corresponding to the light phase which is water and the heavy phase which Virgin coconut oil. The Virgin coconut oil separated is further fed again into the centrifuge and repeated three times to get pure oil.

Deshelling is the process of removing the shell from a dehusked coconut.We offer deshelling equipment that serves this purpose. The blades are specially designed to remove the inner shell from the dehusked coconut with outstanding precision. Ease of operation and safety are the salient features of this equipment.Double blades are fitted on either side allowing the operator to crack the eye of the coconut first and then deshell the coconut with the second blade. The blades are rotated using a 1H.P motor a speed of 24RPM with gear reduction.

Double blades are fitted on either side allowing the operator to crack the eye of the coconut first and then deshell the coconut with the second blade. The blades are rotated using a 1H.P motor at a speed of 24RPM with gear reduction.

The process of removing fiber from coconuts is called de husking.We offer specially designed machines that can put this task at ease.The machine is hydraulic type that operated by an operator controlled by a joystick.A skilled operator can process an average of 300 coconuts per hour which would otherwise be labour intensive and time consuming.The machine is light weight and portable on wheels.

Coconuts are placed on a specified place where it is fixed strongly.An operator moves the joystick and moves the fixed coconut upwards towards a set of fixed rods fitted on a disc.Once the coconut touches the rods it expands removing the husk in the process.

Coconut which are deshelled have a brown portion which is called testa.Fresh coconut meat is obtained after removing this part.Manual process often removes a part of the meat resulting in wastage of the useful part.We offer a special equipment that can fully remove the testa with minimal wastage of the meat and retains the ball form.This machine is called full ball peeling equipment and is very efficient and easy to operate.Skilled labour is not required for operating this machine. This machine eliminates the hard task of hand paring of pieces of coconut kernel on a sorting table. The rugged blade peels off the Testa with minimal wastage.

The machine consists of a rotating drum constructed of SS304 grade steel. The interior of the drum is specially designed with razor sharp blades capable of shearing the outer skin (Testa) of the coconut.The drum rotates at a speed up to 1200 rpm and before operating the machine coconut is freely placed into the drum.Once the machine is started the drum rotates and the coconut continues to freely move inside the drum shearing off the Testa during the process.

Expeller oil mills use extrusion principle as the base for extracting oil from copra.The raw material is fed through a hopper and passes through a press chamber.The press chamber consists of a screw gear enclosed in a cage.As the material is pressed inside the chamber the oil is extruded from the nut and drops from the cage while the cake is discharged from the end.In case of copra oil mills we recommend three stage expelling process for maximum output.

We offer oil expellers with single, double and triple gear reduction. Gears are made of high quality steel and run in oil bath. Expellers are also available in 4 bolt, 6 bolt and 9 bolt types. All our machines are highly efficient and reliable. Capacities range from 35Kg/hr to 700 Kg/hr depending on your requirements.

The process of removing fiber from coconuts is called de husking.We offer specially designed machines that can put this task at ease.The machine is hydraulic type that operated by an operator controlled by a joystick.A skilled operator can process an average of 300 coconuts per hour which would otherwise be labour intensive and time consuming.The machine is light weight and portable on wheels.

Coconuts are placed on a specified place where it is fixed strongly.An operator moves the joystick and moves the fixed coconut upwards towards a set of fixed rods fitted on a disc.Once the coconut touches the rods it expands removing the husk in the process.