Catalysts And Absorbents #652259

9) MOTORMAN MULTI FUNCTIONAL DIESEL FUEL ADDITIVEDiesel, Kerosene, LDO, Additive containsCetane Number Improver : Quick burning of entire fuel sprayed in combustion chamber is essential for better thermal efficiency. Higher the Cetane number the quicker is the burning. Complete combustion of fuel improves the thermal efficiency of engine.Lubricity Improver : Parts of Fuel Injection Pump are lubricated by diesel itself. Inferior quality of diesel starves parts of fuel pump of lubrication. Due to better lubricity imparted to fuel causes smooth functioning of fuel system. Surfactants : The finer the spray of fuel the better & quicker the combustion of fuel. Reduced surface tension of fuel helps it in forming smaller droplets of fuel in a spray. Air fuel mixture in the form of very fine droplets of fuel in combustion chamber results in better flame geometry. This leads to maximum power output. Detergents : All the internal surfaces of fuel system are cleaned of dust, carbon particles, wax, warmish etc. Injector nozzles are always retained clean for desired function.Dispersant : At high operating temperatures and pressures fuel is retained chemically stable. Decomposed fuel leads to deposition of unwanted gum compounds; which is thus avoided. ADVANTAGES :Higher power output obtained. Fuel system is retained clean.Higher life of fuel pump obtained.Better thermal efficiency achieved.Engine knocking avoided.Air pollution reduced. METHOD :Add MMDFA in Diesel.One Liter of MMDFA can treat 1000 Liter of Diesel PACK SIZES : 100ml : Suitable for all Diesel. Engines 1L : Suitable for all Diesel. Engines

4) motorman engine flushsludge removal additive for engineadvantages : conventional just oil change cannot thoroughly clean inner parts of engine.oxidized oil deposits on engine parts are released from base metal surface.carbon particles and sludge, which block oil passage, are cleaned.additional wear which may occur due to built-up carbon deposits is eliminated.engine is maintained like new.restores peak performance of engine.improves working life of engine by keeping it clean.compatible with all grades of mineral and synthetic gear oils.Method :pour contents into engine oil before oil-change.run engine for 10 minutes.remove drain plug to drain oil in warm condition. Pack sizes : 250ml : suitable for cars, orvs, lcvs upto 4l oil sump capacity. Pour about 10 % of oil reservoir.

12) MOTORMAN CHAIN LUBE SPRAYTacky Lubricant, Fast working formula, Sprays like oil but sticks like grease.ADVANTAGES :Penetrates in roller and pin of chain.Forms tacky long lasting film of grease.Does not get thrown off at high speed.Reduces friction in chain links and sprocket teeth.Ensures smooth and noise led working of chain.Water resistant film inhibits corrosion.Silences squeaking joints.Difficult to reach parts can be lubricated using capillary.Method :Ensure that chain is free of dirt and clay.Shake can well before use.Spray evenly through nozzle and capillary.Move chain freely as you spray steadily till the chain looks wet.Its contents are tacky and stick to chain immediately without dripping.PACK SIZES : 320gm : suitable for customers as well as garages.