Write a Review
Our Products
We are leaders in the market for providing best range of Aluminum Impeller Castings, Carbon Steel Castings, Gun Metal Castings, Mild Steel Castings and Cast Iron Castings
Specification Grade: IS-2724 {1989}
| Grade | Equivalent Nearest International Standard | Chemical Composition (Values are in Max % unless specified) | - | - | - | - | - |
|---|---|---|---|---|---|---|---|
| - | - | C | Si | Mn | P | S | Reduction |
| Gr.1 | BS-3100, Ae2 | 0.04 | 0.06 | 1 | 0.05 | 0.05 | - |
| - | - | 0.05 | - | - | - | - | - |
| Gr.2 | - | 0.04 | 0.03 | 1 | 0.05 | 0.05 | - |
| - | - | 0.05 | 0.08 | 1.4 | - | - | - |
| - | - | 0.18 | 0.06 | 1.2 | 0.05 | 0.05 | - |
Standards
| British Standard G1 | British Standard G2 |
|---|---|
| Indian Standard : Grade I | Indian Standard : Grade II |
| Nominal Composition : 88 / 10 / 2 | Nominal Composition : 88 / 8 / 4 |
| Tensile Strength (kg/mm2) : 26-64 | Tensile Strength (kg/mm2) : 25 - 32 |
| Elongation % on 2" : 15 - 25 | Elongation % on 2" : 15 - 25 |
| Brinell Hardness : 70 - 95 | Brinell Hardness : 70 - 90 |
| Typical Uses : Pressure tight bearings, bushes, pumps and pump fittings, valves, valve bodies, and valve guides under corrosive marine conditions | Typical Uses : Pressure tight bearings, bushes, pumps and pump fittings, valves, valve bodies, and valve guides under corrosive marine conditions |
We offer a wide range of Cast Iron Castings available in varied levels of hardness, dimensions and sizes as per the specific requirements of different industries. Cast Iron Castings are alloyed using Chromium, Nickel and Molybdenum. The brilliant surface finish of the Cast Iron Castings makes them the foremost choice in different industries. We are among the prominent Cast Iron Castings Manufacturers and Suppliers based in India.
HighlightsSpecifications
| Hardness Shore C | C | Mn | Si | P | S | Ni | Cr | Mo | Uts kgmf/mm2 |
|---|---|---|---|---|---|---|---|---|---|
| 50-60 | 3.00 - 3.20 | 0.60-0.90 | 1.00-1.50 | 0.15 Max. | 0.06 Max. | 1.50-2.00 | 0.80-1.20 | 0.25-0.40 | 35-45 |
| 60-70 | 3.00 - 3.30 | 0.60-0.90 | 1.00-1.50 | 0.15 Max. | 0.06 Max. | 1.50-2.00 | 0.80-1.20 | 0.25-0.40 | 35-45 |
| 50-60 | 3.10 - 3.50 | 0.60-0.90 | 1.00-1.50 | 0.15 Max. | 0.06 Max. | 2.00-3.00 | 0.80-1.20 | 0.25-0.40 | 35-45 |
Standards
| British Standard: PB1 | British Standard: PB2 | British Standard: PB3 | British Standard: PB4 |
|---|---|---|---|
| Indian Standard | Indian Standard | Indian Standard | Indian Standard |
| Nominal Composition : 89 / 10 / 0 / 1 | Nominal Composition : 88/12v | Nominal Composition : 90/10 | Nominal Composition : 90.5 / 9.5 |
| Tensile Strength (kg/mm2) : 22-28 | Tensile Strength (kg/mm2) : 22-31 | Tensile Strength (kg/mm2) : 23-31 | Tensile Strength (kg/mm2) : 19-26 |
| Elongation % on 2" : 2-8 | Elongation % on 2" : 5-15 | Elongation % on 2" : 10-20 | Elongation % on 2" : 3-12 |
| Brinell Hardness : 60-100 | Brinell Hardness : 75-110 | Brinell Hardness : 70-90 | Brinell Hardness : 70-95 |
| Typical Uses : Bearings for aero engines, diesel engines, electrical generators and rolling mills | Typical Uses : Gear and worn wheels | Typical Uses : Pressure vessels, pump body castings and impellers for chemical plants | Typical Uses : Bearings for aero engines, diesel engines, electrical generators and rolling mills |
Manish Singh -9869235697 (Mould N Cast)
Plot No. A/414, MIDC TTC Ind. Area, Village Mahape, Mumbai, Maharashtra - 401107
Share us via
