Other Products / Services #3762670

We manufacture a wide range of Rubber Sheets made from a variety of rubber grades like Natural, Silicon, EPDM, Nitrile, Butyl, Chloroprene and others. These sheets are available with or without canvasnylon insertions. Depending upon the requirement of our customer, we manufacture the sheets in various sizes & thickness with both smooth and textured finishes.

We manufacture a wide range of rubber strips in various shapes (Rectangle, Triangle, Square, or any other shape) & sizes ranging from width (2mm to 100mm) & thickness (1.5mm to 50mm or more) as per the specific requirements of our customers. These strips can be made from all types of rubber grades like Viton, Silicone, Neoprene, Nitrile, EPDM, Natural in solid as well as sponge type.

 Advantages• Better flexibility & compression properties • Excellent resistance to chemicals & solvents • High temperature resistance • Good electrical & mechanical properties

 ApplicationElectrical Control Panel & Switchgears, Junction Boxes & Enclosures, Pumps & Valves Industry, Pharmaceutical Industry, Gears, Motors & Transmission

High temperature resistance (-50C to +300C). Excellent resistance to oils, fuels, lubricants, atmospheric oxidation, sun and weather.Excellent compression set values at high temperatures. Good electrical & mechanical properties

A seal is a device which helps join systems or mechanisms together by preventing leakage (e.g., in a plumbing system), containing pressure, or excluding contamination. The effectiveness of a seal is dependent on its adhesion.

We manufacture a variety of seals which vary depending on their physicality and area of application.

U-V Sealsare asymmetrical lip profile with its inner part grooved in U or V shaped to provide sealing and prevent the ingress of dust, oil, fluids or other hazardous particles.
Applications :Hydraulic & Pneumatic Application, Gears, Pumps & valves, Auto Industries, etc.

Wiper sealsare often used for fluid containment and to prevent dirt from entering a reciprocating shaft mechanism. Application: Hydraulic & Pneumatic cylinders

Quad Ringsare seals that are designed with a section of 4 lobes offering symmetry advantages similar to an O-ring, but providing an improved solution for the sealing of pneumatic applications.

Seal Kit for Cylinder, Rod Seal, Lip Seal, Hydraulic Seal, Cup Seal, Bucket Seal, Dust Seal, Air Seal, Piston Seal, Rotary Shaft Seal, Nut Ring, Chevron Sealare some other types of Rubber Seals that we manufacture.

As per the customers specific needs & area of application, we can manufacture a wide range of extruded gaskets & profiles in various shapes, designs & sizes. Heres a list of a few items that we manufacture:

Door Beading gaskets, Glass Beading Gaskets, Gaskets for rope-way cables, Gaskets for mono-rail platformsD-type, P-type, U-V type, C-type, T-type ProfilesHalf Round, Oval, Hexagonal & various other shaped profiles

ApplicationPharmaceutical Industry, Cable Ropeways, Beam Dyeing & Jet Dyeing machines, Furnace Chambers, Chemical Vessels, Automotive Industry, Petrochemical & Fertilizer plants, etc.

We manufacture a wide range of extruded tubes & sleeves of various sizes (ranging from 0.5mm to 50mm or more) to meet the specific requirements of our customers. These tubes are available in Transparent or any other color & are made from a variety of Rubber Grades like Silicone, Viton, Neoprene, Nitrile, EPDM etc.

The silicone tubes manufactured by us comply withUSP Class VI & FDA 21 CFR 177.2600and are used in variousPharmaceutical & Medical Applications.

Advantages (Silicone Tubings)Non Toxic & Food quality (comply to USP Class VI & FDA 21 CFR 177.2600)High temperature resistance -80C to 250C (-110F to 480F)Excellent Resistance to oxidation, ozone, radiation, body tissue and fluidCan be sterilized by steam, dry heat, ethylene oxide (ET) and gamma radiation

ApplicationPharmaceutical Equipment& Machinery, Electrical Insulation, Thermal Power Stations, Circuit Breaking Industry, Light fittings & Enclosures

Rubber expansionbellowsare used in machine to prevent dust particles, metallic chips, to enter into the precision or important part of the machine to avoid damages or problems of vibrations, noise, shock, corrosion, abrasion etc.

We manufacture Rubber Bellows of different shapes & sizes made from a variety of rubber grades like Neoprene, Nitrile, Silicone, EPDM, Viton, or Natural Rubber. We can also manufacture them according to customer's specific requirements.

Applications:Automobile Industry, Electrical Insulation, Steering System, Suspension Joints.

It is a process in which rubber is mechanically bonded to a metal insert during the molding process using various imported adhesives.

We manufacture various types ofmetal-rubber bonded productsas per our customers requirement. They have various applications including automotive braking systems, fuel-dispensing equipment, and oil field completion tools etc. We also manufactureRubber mountings (metal bonded) & Anti vibration padswhich have advantages like high durability, heat resistance, shock absorbent and preciseness.

Application:Air conditioners, compressors, generator sets, electric motors, automotive radiators & vibratory Feeders

diaphragmsare sealing agents, used as moveable membranes to prevent two or more components from leakage and friction. The flexible nature of this seal allows pressure effects to cross the barrier but not the material being contained.

we can manufacture rubber diaphragms which are bonded with brass, mild-steel or stainless-steel studs. We also manufacture diaphragms that are metal inserted, gasketed, teflon laminated or that are reinforced with fabric, nylon, canvas, wire mesh, etc.

applications:electrical & pneumatic control valves, pressure regulators, saunders valves, solenoids valves, high pressure pumps, actuators, gas regulators, angle valves, brine filter valves, dust collectors, spray pumps, etc

We manufacture various types ofmetal-rubber bonded productsas per our customers requirement. They have various applications including automotive braking systems, fuel-dispensing equipment, and oil field completion tools etc.

We also manufactureRubber mountings (metal bonded) & Anti vibration padswhich have advantages like high durability, heat resistance, shock absorbent and preciseness.

Application:Air conditioners, compressors, generator sets, electric motors, automotive radiators & vibratory Feeders

A rubber bush is a type of vibration isolator. It provides an interface between two parts, damping the energy transmitted through the bushing. The bush separates the faces of two metal objects while allowing a certain amount of movement, which helps the suspension parts to move freely.

We manufacture Rubber Bushings of different shapes & sizes made from a variety of rubber grades like Neoprene, Nitrile, Silicone, EPDM, Viton, or Natural Rubber. We can also manufacture them according to customers specific requirements.

Applications:Automobile Industry, Balancing Machines, Gears & Motors, Pumps, Blowers, Vibrators, Couplings, etc.

A grommet is a ring inserted into a hole through a thin material, used to prevent tearing or to cover the sharp edges of the pierced material.

We manufacture Rubber Grommets of different shapes & sizes made from a variety of rubber grades like Neoprene, Nitrile, Silicone, EPDM, Viton, or Natural Rubber. We can also manufacture them according to customers specific requirements.

Applications:Electrical & Vibration Isolation, Sealing, Compression & Insulation, Noise Control, etc.

We manufacture a wide range of Rubber Sheets made from a variety of rubber grades like Natural, Silicon, EPDM, Nitrile, Butyl, Chloroprene and others. These sheets are available with or without canvas/nylon insertions. Depending upon the requirement of our customer, we manufacture the sheets in various sizes & thickness with both smooth and textured finishes.

Advantages & Applications :Temperature resistance, electrical resistance, abrasion resistance, steam and other jointing gaskets and packing material, food grade sheets, hospital sheets, flame retardant sheets, insertion sheets, etc.

Closed cell sponge rubber can be formulated into several different elastomeric materials in a variety of densities. The most common materials are NeopreneEPDMSBR blend, Neoprene, EPDM, and Silicone. Sponge rubber can be specified in low, medium, or high density firmnesses. It is a highly flexible material that can adapt to seal almost any surface application when used with pressure sensitive adhesives or with Heat Activated Tape Systems (HATS).

Exhibit outstanding mechanical and physical properties in comparison with other elastomers. Urethanes provide outstanding resistance to abrasion and tear and have the highest available tensile strength among all elastomers while providing good elongation characteristics.

We expertise in manufacturing high quality rubber parts which are used on a heavy scale in Pumps (Industrial Pumps, Hydraulic & Pneumatic Pumps, Chemical process & acid pumps, Submersible pumps, Waste water & Slurry pumps, etc) Valves(Solenoid valves, Pneumatic & Hydraulic valves, Pressure regulators valves, control valves, Saunders valves, valves for Actuators, Butterfly valves, Gate valve, Check valve etc.)

Gears, Transmission Drives, Pumps, Engines, Cranes, Motors, Washing Machine, Auto Industries & Agricultural Pesticide Pumps & Sprayers

A - Type : Metal Inserted.B - Type : Metal Claded or Outside MetalC - Type : Closed type or MOC Type.

Chords, Sleeves, ( Coloured & Transparent ), Strips, Belt, Gaskets & Different profiles mainly used in electrical panel Boards, Computers & Tele-communication, Station Cover Gasket, Conveyor System, Dyeing & Oven Packing, Cement & Fertilizers plant, Automobile & Docks. Switchgear & Electrical fittings

Electrical pushbutton switches parts such as U-Seal for actuation, Belt ring, Diffuser washer, Key selector U-Seal, Lense O Ring, Transparent & color silicone rubber Boots for Dust proofing & Station cover gaskets having 100 % I.P.-65 test approved.