Other Products / Services #3836803

Details :

• Silicone rubber mat  has higher heat resistance and chemical stability that help it in providing better electrical insulation.
• It has high elasticity and compressibility as well as excellent resistance to cold temperatures.
• Silicone rubber mat  has resistance to wide temperature range. It offers excellent resistance to extreme temperatures, the range of which can be from minus 100°F to plus 500°F. This rubber can be used indefinitely at 150°C that doesn't lead to any change in the properties of silicone rubber. It can withstand the temperature of 200°C for 10, 000 hours or more. Some of the silicone rubbers can even withstand heat of 350°C for short periods.
• Silicone rubber has outstanding oil resistance at high temperatures. From among other common types of synthetic rubbers, nitrile rubber and chloroprene rubber have somewhat higher oil resistance at temperatures lower than 100°C but at higher temperatures, silicone rubber is superior to all other rubber types.
• Silicone rubber has exceptional weather resistance. Ozone created by corona discharge does not deteriorate silicone rubber. Thus, silicone rubber can be exposed to wind, rain and UV rays for longer periods without any change in its physical properties.
• The tensile strength, tear strength, elongation and compression set of silicone rubber are far superior to conventional rubbers. The tear strength of silicone rubber is usually around 9.8 kN/m. certain high-strength types of silicone rubbers also come with tear strength between 29.4 kN/m and 49.0 kN/m, achieved through polymer modification and/or judicious selection of fillers and cross linkers.
• Thermal conductivity of silicone rubber is higher than most of the other rubbers. Silicone rubber with high thermal conductivity is used to make products like thermal interface sheets and heating rollers.
• Silicone rubber has excellent moisture and steam resistance. It can be immersed in cold, warm or boiling water for longer periods with water absorption of about 1%. This doesn't affect its mechanical strength or electrical properties. When it comes in contact with steam under ordinary pressure, there is no deterioration of silicone rubber. However, high pressure steam at temperatures above 150°C can cause breakdown of the siloxane polymer and a decline in the properties of the rubber.
• It is metal detectable.
• It glows in the dark.
• Silicone rubber is also electrically conductive.
• Apart from being resistant to oil, silicone rubber is also resistant to chemical, acid and gas.
• Silicone rubber is flame retardant and has the property of low smoke emission.

We offer a large standard range of rubber oil seals in various sizes. Made of durable high-grade rubber, our rubber oil seals are engineered to resist tearing, abrasion, wear and friction, and restrain motion of mechanical parts. Featuring excellent high temperature and corrosion resistant capabilities, our rubber oil seals are highly demanded in various industries.

silicone medical bracelet is made up of medical grade silicone rubber which complied

with usp class vi requirement & fda 21 cfr 177.2600

temperature resistant from -80c to 250c (-110f to 480f)

non reactive to body tissue and fluid

non-adherence to tissue.

unaffected by most waster soluble materials

sterilisable by steam, dry heat, ethylene oxide (et)) &gamma radiation

resists oxidation, ozone and radiation.

indefinite shelf life

does not support bacterial growth

available in sizes from 6 mm id to 60 mm id.

 Diaphragms and caps are barrier methods of contraception. They fit inside your vagina and cover your cervix (entrance to the uterus – womb). They come in different shapes and sizes. Vaginal diaphragms are circular domes made of thin, soft latex (rubber) or silicone with a flexible rim. Cervical caps are smaller and are made of latex or silicone. To be effective, diaphragms and caps should be used with a spermicide. Spermicides are chemicals that kill sperm.

This silicone Tooth brush are made up of liquid silione rubber of food grade approved rubber which complied

with USP Class VI requirement & FDA 21 CFR 177.2600 .we desing as per customer requirement also

Tooth Brush made up of Silicone rubbers are unmatched by other elastomers in many important specification categories. Outstanding benefits of silicone include are :

• Unsurpassed biocompatibility
• Ability to be sterilized by many methods
• Low compression set
• High tear strength
• High elongation
• Natural translucence or high clarity
• Ability to be pigmented and radiopacity
• Ability to retain softness indefinitely
• Long shelf life
• Processing versatility
• UV, moisture and steam resistance
• Ease of cleaning
• Complies with FDA & other standards of Health & Safety
• Approved and recommended by leading Paediatrics
• Made from 100% non toxic and BPA free super soft silicone material
• Specially designed for a simple, effective and comfortable start towards oral hygiene
• The outer side of the brush has soft & fine pressure points to stimulate and massage the gums. This gives baby relief from soreness during teething phase
• Cleanses teeth effectively to ensure that there are no deposits left behind on the tooth and gum surface
• Easy to use, sterilize and store
• Easy to carry in a diaper bag

Silicone medical ID provides information that could save your life in an emergency. With medical conditions, drug and food allergies, prescribed medicines and emergency contacts engraved onto its surface, a medical ID bracelet or necklace guides paramedics and doctors in giving you appropriate, timely treatment when you can not speak for yourself. These silicone Bands and bracelets are made up of medical grade silicone rubber that are conforming to FDA 21 CFR 177.2600

we do supply wooden lid with screen print on it

we use siliver oke , and mdf materil

.

Made from high quality silicon Rubber in the shape of ironand rectangular . Protects surfaces from a hot iron Safe for use on ironing tables or counters Raised dots help your iron cool faster.The mat uses specially designed silicon rubber supports on base pad to keep iron elevated so it cannot harm the surface underneath while also providing a slip resistant protection to keep the iron from falling off.Protects surfaces from a hot iron, Safe for use on ironing boards, tables or counters, Raised dots help your iron cool faster. Please Note That Iron Shown is not part of package. Package contains 1 Pcs. Of Iron Pad - Silicone Iron Resting Pad only.

We are main supplier of this product.

Round cords and round cord rings achieve their sealing effect from the deformation of the cross section after installation and compression into the installation space. As static seals, they are superbly suited for tube fittings and cap seals in container construction.

Media pressure strengthens the sealing function in the operational state , Round cords can be individually joined into round cord rings in the desired dimensions at the point of use , In the case of round cord rings: a high degree of flexibility thanks to customized dimensions , The material VMQ 60 is suited to food contact. The appropriate reference testing is in accordance with FDA (21 CFR 177.200) and LFGB Recommendation XV (EC 1935/2004)

Vulcanizates based on Viton™ provide an exceptional balance of physical property characteristics, including the following features: Resistance to Temperature Extremes Heat—Compared to most other elastomers, Viton™ is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton™ remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204 °C (399 °F) or to intermittent exposures up to 316 °C (601 °F). High temperature service limits are generally considered to be: – 3, 000 hr at 232 °C (450 °F) – 1, 000 hr at 260 °C (500 °F) – 240 hr at 288 °C (550 °F) – 48 hr at 316 °C (601 °F) Cold—Viton™ low temperature performance is dependent on type, with serviceability as low as –31 °C (–24 °F) in dynamic seals and –45 °C (–49 °F) in static seals using Viton™ GLT-S. 

Our Seals  has the following advantages :

• Excellent static and dynamic sealing
• Good back-pumping ability
• High wear resistance/operational reliability
• Good chemical resistance
• Can be used as an individual seal or as secondary seal within sealing systems
• Small cross sections possible

Silicone rubber withstands high and low temperatures far better than their organic rubber counterparts.

• Ability to be used continuously at 150°C (302° F) with virtually no change in its properties.
• Certain silicone compounds can withstand use even at 200°C (392° F) for 10, 000 hours or more.
• Some silicone rubber products can withstand heat upwards of 350°C (662° F) for short periods.

Silicone rubber also exhibits excellent resistance to cold temperatures.

• Embrittlement point for some silicone parts is between -60° to -70°C, (-76° to -94° F) (organic rubber is between -20° to -30°C, (-4 to -22° F)
• Some silicone products are able to withstand extremely low temperatures, keeping their elasticity at -100°C (-148° F) and below.
• Withstands high & low temperatures far better than organic rubber
• Good thermal stability
• Repels water & forms tight seals
• Excellent electrical insulation, no decline in insulation performance even when immersed in water, making it an ideal insulating material
• Flexible at low temperatures, stiffens up at higher temperatures
• Under ordinary pressure, contact with steam typically causes little or no deterioration
• Flame retardant, will not ignite easily. Some products received UL94 V-0 certification according to the UL94 (USA) standards for flammability classification.
• Unlike most organic elastomers such as EPDM and neoprene, the compression set of silicone rubber is consistent over a wide range of temperatures from -60° to +250°C. The selection of a proper curing agent and post-curing is particularly recommended when using silicone material to make molded products that require a low compression set.
• Customizable for specific applications by adjusting the compound recipe by selecting the proper curing agent and/or post-curing the compound to improve resistance to flames, steam & hot water (over 150C)
• Low chemical reactivity

We are main supplier of this product.

We

manufacture

anti

vibration

mountings that are widely used by our clients in various industrial

applications, including the automobile industry. Made from high grade rubber,

our anti vibration mountings are durable and heat resistant. Engineered to

perfection, these mountings are helpful to absorb heavy vibration and are oil

resistant

We are main supplier of this product.

We do manufacture silicone chocolate moulds candle moulds as per

customer requirements with respect to their design with food grad material

and also with general purpose material as per customer requirement.

We manufacturers and suppliers of a wide range of Silicone End Caps such as which provide excellent resistance in case of dust and ferine particle. These are designed by our skilled engineers to be used over a variety of applications. We also take customized orders and produce exactly as per clients' requirement.

Features : Some important features of our rubber mountings are :

• Resistance to grease and oils
• Resist extreme operating conditions
• Resistant to surface abrasion wear
• Resist temperature fluctuations
• Resistance to sunlight exposure
• Greater radial elasticity than axial elasticity
• Variety of dimensions, sizes available.
• Easy to install
• Easy to maintain

All our rubber mountings are as per defined parameters and in compliance with ISO standards.

We are one of the manufacturers and suppliers of an exclusive range of extruded rubber products like extruded rubber profiles, rubber profiles. Easy to install, we manufacture precise extruded rubber profiles, rubber profiles with durable and reliable rubber compounds.

Types
Our range of extruded rubber profiles are of various types like :

• Cord & Square Rubber Profiles
• Round Rubber Profiles
• Rectangle Rubber Profiles
• Sponge Profiles and Tubes
• Building Industry Profiles
• Door Trims

Features :

• They are ideally suited for those applications that require high resistance to both, high as well as low temperatures.
• These components are capable of having good dimension stability.
• They have low compression set.
• They also are made with design flexibility in mind.
• Flame retardant
• Easy to install and durable

Technical Specifications :

• We can use rubber compounds such as nitrile, neoprene, silicone, EPDM, SBR, Natural rubber
• Black or any other colour can be supplied.
• Hardness according your requirements.
• The extruded rubber profiles can be supplied cold or hot spliced.
• The rubber profiles can be cut to required length.
• The extruded product dimensions and characteristics can also be supplied as per clients' requirements.

we offer a comprehensive range of environmentally preferred flooring, including rubber tile products, rubber rolls and interlocking tile floors. Recycled Rubber Flooring is designed for commercial and sport applications; Our flooring line was first produced by the company that invented the process of recycling rubber tires into sheet flooring and underlayment. we use up to100 percent post-consumer rubber that would normally end up in junk yards and landfills. The discarded tires are ground into various size granules, then cleaned and sorted after all metal, dirt and fibers are removed. Our EPDM color granules are made from 30 to 100 percent pre-consumer waste.

We also manufacture and supply rubber grommets. Our range of rubber grommets are made of high quality, oil and heat resistant synthetic rubber and are designed to allow passage through a metal panel or plate while protecting your wire, cable or hose from cutting and abrasion.

Features :

• We produce molded rubber grommets in every shape, size and specification.
• We are specialized in custom designed, large volume requirements.
• We also have engineered a line of standard size rubber grommets.
• Our rubber grommets are made of EPDM, SBR, Neoprene, Silicone, and Natural Rubber.
• They have a high melting point and Bear high temperature and pressure
• Easy to install and Light in weight

Types of Rubber Grommets :

• Insulation Grommets
• Commercial Grommets
• Multiple Hole Grommets
• Oval Grommets
• Semi-Standard Grommets
• Mounting Hole Grommets
• Blind/Plug Grommets
• Horse Shoe Grommets

Applications : These molded rubber grommets are used in various fields like as follows :

• Motors
• Automobile filters
• Fuel injection pumps
• Engine gaskets
• Hardware
• Electronic Appliances
• Furnishing
• Telecom and various industries

Utilizing our rich industrial expertise and a robust infrastructure, we design

and engineer durable and reliable suspension bushes. Made of high quality

rubber, these are manufactured as per International Standards. Securely

bonded between inner & outer metal to give maximum axial, radial & tortional

stiffness, our suspension bushes provide prolonged tyre life, increased safety,

performance, and greater cost-effectiveness.

We are a recognized name in manufacturing Silent Block Bushes for the

purpose of shock absorbance. We manufacture latest designs in silent block

bushes from hi-grade raw materials. They are widely used in automobiles to

absorb shocks while running. These can also minimize vibration affecting the

passengers while on a vehicle. Our bushings are of high precision and available

in a wide variety of sizes. We can also customize as per you requirement.

We also manufacture and supply rubber grommets. Our range of rubber grommets are made of high quality, oil, heat and ozone resistant synthetic rubber and are designed to allow passage through a metal panel or plate while protecting your wire, cable or hose from cutting and abrasion.Features We produce molded rubber grommets in every shape, size and specification.We are specialized in custom designed, large volume requirements.We also have engineered a line of standard size rubber grommets.Our rubber grommets are made of EPDM, SBR, Neoprene, Silicone, and Natural Rubber.They have a high melting point and Bear high temperature and pressure Easy to install and Light in weight Types of Rubber Grommets Insulation Grommets Commercial Grommets Multiple Hole Grommets Oval Grommets Semi-Standard Grommets Mounting Hole Grommets Blind/Plug Grommets Horse Shoe Grommets Applications these molded rubber grommets are used in various fields like as follows:Motors Automobile filters Fuel injection pumps Engine gaskets Hardware Electronic Appliances FurnishingTelecom and various industries.

Silicone profiles , Food grade and non food grade

Features

They are ideally suited for those applications that require high resistance to

both, high as well as low temperatures.

These components are capable of having good dimension stability.

They have low compression set.

They also are made with design flexibility in mind.

Flame retardant

Easy to install and durable

Technical Specifications

We can use rubber compounds such as Nitrile, Neoprene, Silicone, EPDM, SBR,

Natural rubber

Black or any other colour can be supplied.

Hardness according your requirements.

The extruded rubber profiles can be supplied cold or hot spliced.

The rubber profiles can be cut to required length.

We have highly acclaimed in manufacturing premium quality butterfly valve seats, rubber valve seats. These are flow control devices used for regulating fluid flowing through pipes. We can also make these butterfly valve seats, rubber valve seats as per the requirements and specifications of our valuable clients.

Features of Butterfly valve seats include :

• High mechanical properties
• Good swell properties
• Resilience with higher end of purity
• High tensile strength
• Outstanding abrasion resistance
• Good damping properties
• Strong bonding to plastic and metal
• Lightweight
• Easy to install
• Resistant to oil, chemicals & lubricant
• Low co-efficient of friction
• Good thermal resistance

These Silicone products are made up of silicone High quality Silicone Rubber Sheets conforming to FDA 21 CFR 177.2600 grades.

Temperature resistant from -80C to 250C (-110F to 480F)

Non reactive to body tissue and fluid

Non-adherence to tissue.

Unaffected by most waster soluble materials

Sterilisable by steam, dry heat, ethylene oxide (ET)) &gamma radiation

Resists oxidation, ozone and radiation.

Indefinite shelf life

Does not support bacterial growth

We are main supplier of this product.

Silicone Balls are mainly made of food grad silicone rubber . which are mainly used in weat flour industries and other flour industries, this are also used in garments industries while whashing clothes.

Siliconerubberballs, they can beusedin a wide range of temperatures with high elastic properties. They are resisting to weather and radiation and they can be insulating or conducting according to the manufacturing processing. They do not provide good mechanical and wear features.

Expansion joints are often included in industrial piping systems to

accommodate movement due to thermal and mechanical changes in the

system. When the process requires large changes in temperature, metal

components change size. Expansion joints with metal bellows are designed to

accommodate certain movements while minimizing the transfer of forces to

sensitive components in the system.

Pressure created by pumps or gravity is used to move fluids through the piping

system. Fluids under pressure occupy the volume of their container. The

unique concept of PRESSURE BALANCED EXPANSION JOINTS(PBEXJ) is they are

designed to maintain a constant volume by having balancing bellows

compensate for volume changes in the bellows (line bellows) which is moved

by the pipe. An early name for these devices was “pressure-volumetric

compensator”.

Pressure Balanced: Applications

Engineers often specify a pressure balanced expansion joint in the piping

connecting the boiler feed-pump turbine exhaust to the condenser in

conventional fossil-fueled electric power generating plants. [1] Variations in

operating conditions cause frequent changes in temperature, pressure and

steam quality. Condensers are designed to withstand steam generator

overloads without causing significant loss of electric power, but the piping

system must accept the forces associated with these variations.

Expansion joints are often included in industrial piping systems to accommodate movement due to thermal and mechanical changes in the system. When the process requires large changes in temperature, metal components change size. Expansion joints with metal bellows are designed to accommodate certain movements while minimizing the transfer of forces to sensitive components in the system.
Pressure created by pumps or gravity is used to move fluids through the piping system. Fluids under pressure occupy the volume of their container. The unique concept of PRESSURE BALANCED EXPANSION JOINTS(PBEXJ) is they are designed to maintain a constant volume by having balancing bellows compensate for volume changes in the bellows (line bellows) which is moved by the pipe. An early name for these devices was “pressure-volumetric compensator”.

Applications :

• The major advantage of a pressure balanced joint is its ability to absorb externally imposed axial movement without imposing additional pressure loading is objectionable.
• The force resulting from the bellows spring rates is not eliminated, but it is relatively small when compared to the pressure thrusts.
• We offer expansion joints and bellows for nuclear and thermal power plants, refineries, fertilizers, petrochemicals, and paper and sugar industries. These are available at industry leading prices to our clients

We are the leading manufacturers, suppliers of high quality rubber dampers, rubber bands. Made of high quality rubber, our industrial rubber dampers and industrial rubber bands are available in various sizes and shapes and are used for a variety of jobs in both industrial and administrative capacity. Rubber dampers are used to avoid the vibration, noise and harness in machineries and automotives. Company also has the expertise to manufacture them as per customer requirements.

Features :

• We manufacture industrial rubber bands and industrial rubber dampers keeping in mind the atmospheric conditions.
• Our rubber dampers and rubber bands highly used in the automobile & mechanical applications.
• They are great shock absorbers.
• Rubber dampers and rubber bands are generally made in SBR, EPDM, NR as per the conditions of usage.
• Highly known for their durability, long lastingness and stability.
• Available at the most economical prices.
• Our manufactured components smooth out and damp a sudden shock impulse from automotive parts.
• Their strength and elasticity make them an ideal choice for a various applications.
• Excellent dampening properties.
• They are re-usable.
• Cost-effective