Center Support Bearings are one of the most demanding bearing application in the automotive applications. The bearing is used to support the Propeller shaft which connects the Gear Box to Rear Axle of the Vehicle. MRS produces center support bearings for HCV with extended inner ring design which utilized special sealing arrangement. The Extended Inner Ring allows higher load capacities while maintaining the overall rigidity of the bearing arrangement and the special sealing arrangement provides least amount of ingress of dirt & water in the bearing. These special arrangements give MRS bearings much better service life

MRS produces steering support bearings and races to suit applications in the HCV's , LCV's , 2 Wheelers and 3 Wheeler's. The bearings are designed to provide optimum support to the steering column with vibration damping characteristics.

MRS produces drawn cup (Sheet Metal) Needle bearings for specialized applications. These bearings are used wherein a very small cross section area is available and in application of low to medium loads. The designs offered are both Cage Guided and Full Complement Type. The typical applications catered by MRS at present are for automotive and industrial applications.

These bearings have barrel-shaped rollers between the inner ring, which has two raceways, and the outer ring which has one spherical raceway. Since the center of curvature of the outer ring raceway surface coincides with the bearing axis, they are self-aligning in a manner similar to that of self aligning ball bearings. Therefore, if there is deflection of the shaft or housing or misalignment of their axes, it is automatically corrected so excessive force is not applied to the bearings.

Spherical roller bearings can take, not only heavy radial loads, but also some axial loads in either direction. They have excellent radial load-carrying capacity and are suitable for use where there are heavy or impact loads. MRS Manufactures Spherical Roller bearing in the C & CD types.

MRS produces Spherical roller bearings with W33 which has groove outside on the Outer ring with 3 holes on it, this allows easy lubrication of the bearing after fitment thereby saving considerable design requirements.
Spherical Roller bearings can width stand misalignment in the bearing axis by 10 to 1.50 maximum based on the size selected and the loading conditions.
Incase if Spherical roller bearings are to be used for extremely low load applications or the ratio of Radial Load to Axial exceeds 0.20 then it may be necessary to consult MRS technical team prior to using in such application.

The Bearing arrangements of the bottom rollers in the drafting system in spinning frames and roving frames require uniform running in order to guarantee the highest quality yarn. Bottom Roller Bearings are precision needle roller bearings which excel through their high load carrying capacity and extremely accurate radial and side face run-out. A wide variety of Bottom Roller Bearings for supporting bottom rollers in Speed Frames and Ring Spinning Frames are available off the shelf while specific requirements are also catered to.

Bottom Roller Bearings are available with one piece plastic cage or split type steel cage, lubricating nipple and side or centre locating clip for various types and of Roller accommodate some misalignment in the Roller Stand and helps in distributing the load uniformly These are protected from contamination of dust and fly particles by particularly effective gap seals.

To mount the bearings on the stands, we recommend the following :
1 Light mineral oil should be applied on the journal seating. Care should be taken to ensure that the faces and journals of the bottom rollers are neither damaged or dirty .
2. The inner rings is a press fit on the journal A special tubular dummy should be placed against the Inner ring face and the force for mounting should be applied uniformly until the bearing ring abuts the face of the bottom roller. No sharp tool or pointed edge should be used against the bearing ring face. Use of a pneumatic cylinder is recommended over other methods.
3. After the rollers are placed on the stands and the holders are in position, the alignment in the longitudinal direction should be checked to ensure true running. Excessive misalignment can reduce the service life of the bearings

MAINTENANCE

Bottom Roller bearings can to a certain degree be called 'maintenance free". A few routine checks mentioned below will however assist in detecting any malfunction. 1. When the machinery is running, an industrial stethoscope may be used to monitor bearing noise. 2. Follow Lubrication routine of renewing (good quality) Lithium based grease every 4 to 6 months.

MRS has a capability of manufacturing various customer special bearings in-accordance to the application requirements. MRS can produce bearings with special coats and heat treatment processes wherein the standard products cannot be utilized.

Roller Bearings are designed to carry high loads with low cross section height there by saving space and offer more load carrying capacity. Bearings Produces Series of Roller bearings for application in various Industrial, Automotive and Textile Applications.

Roller Bearings are designed to carry high loads with low cross section height there by saving space and offer more load carrying capacity.Bearings Produces Series of Roller bearings for application in various Industrial, Automotive and Textile Applications.

Apart from the above sizes , Bearings has capacity to manufacture & develop special bearings as per Customer's Requirement including Ball Bearings , Cylindrical Bearings , Bushes , Cages , etc .Further reference please contactBearings.

Bearings supplied with Anti Rust Protective Oil & not Lubrications hence before use the Anti Rust Protective be removed and after removal of Anti Rust Oil , Lubrications be made . For Selection of Correct Lubrications please contactBearings . Also Incase of Bearings required with factory - lubrication , the same can be provided on request.

Roller Bearings confirm to ISO 1206 : 2001 standards with standard Tolerances. Mrs Bearings can produce at customer's demand tolerances specific to customers need's and requirements. The RollersBearings are of high grade (G2) class thereby improving the performance of the bearings of the bearings compared to the standard grade rollers.

The Typical Characteristics of the Standard Needle Roller Bearings produced atBearings are listed below.

MRS Produces single row deep groove ball bearings, They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. Deep Groove Ball Bearings are a excellent choice for applications requiring the below Characteristics

• Excellent for high speeds
• Good radial load capacity
• Acceptable axial load capacity in both directions
• Have low torque capacity at startup and running speeds
• Can operate with low noise
• Require little maintenance

MRS do provide these ball bearings with Seals of Metal / Rubber Configurations with seals on one side (Z / RS) or both sides (ZZ / 2RS) . The shield bearings supplied by MRS are pre lubricated for life.

MRS ball bearings are manufactured to ABEC Standards and Meets V2 Noise Levels.

textile bearings are manufactured using superior bearings steel, combined with high quality craftsmanship which ensures that they perform superior throughout their life span.

MRS Cylindrical Roller Bearings are characterized by High Load (Radial) & High Speed Capacity bearings. CRB utilized Cylindrical / Square Shaped Rolling elements, this Rolling Elements are precisely manufactured to attain the Objective of High Radial Load along with High Speed Applications. Limited amount of Axial Loads** are permissible to be applied in only One Direction for exact load limits you can contact our Sales Team for further guidance.

Cylindrical Roller Bearings are available in Various Configurations based on Cage Guided (Brass / Nylon), Full Complement, With Ribs and Without Ribs. Below Schematic shows the various configurations that are as standard withBearings.

Some General Applications for Cylindrical Roller Bearings

• Power Steering Applications.
• Axles for Heavy Commercial Vehicles.
• Industrial Applications like Machine Tool Industries.
• Port Handling & Marine Equipments.
• Mining.

MRS is one of the leading supplier to OE's in the Textile Application Field. MRS Exports this products to more than32 countries in the world right from Germany, Italy, Egypt, Indonesia, Singapore, Korea, China, Peu, Spain etc.

MRS textile products are manufactured using superior bearings steel, combined with high quality craftsmanship which ensures that they perform superior throughout their life span.

• Bearings for Spinning Applications :
• Bottom Roller Bearing
• Bloowroom & Ring Spinning Special Bearings
• Jockey Pulleys for Ring Spinning Machines
• Manual & Automatic Winding Machine Bearings
• Radial & Axial Cages & Bushes
• Special Customised Products for the Spinning Industry

MRS produces bearings for Automatic and Manual Cone Winding machines, the bearings produced by MRS are used in Winding Drums as Spindle Bearings, Adapter Bearings for Automatic Winding Machines

MRS produces clutch release bearings for Heavy commercial vehicles which finds applications in vehicles like Mercedes, Man, & BMC Trucks. MRS Clutch Release Bearings are manufactured using superior bearing steel along with components which can resist high operating temperatures. The clutch release bearings are greased for life time with Seals manufactured to ensure high operational temperatures with a minimum grease loss.

Center Support Bearings are one of the most demanding bearing application in the automotive applications. The bearing is used to support the Propeller shaft which connects the Gear Box to Rear Axle of the Vehicle. MRS produces center support bearings for HCV with extended inner ring design which utilized special sealing arrangement. The Extended Inner Ring allows higher load capacities while maintaining the overall rigidity of the bearing arrangement and the special sealing arrangement provides least amount of ingress of dirt & water in the bearing. These special arrangements give MRS bearings much better service life

MRS produces steering support bearings and races to suit applications in the HCV's , LCV's , 2 Wheelers and 3 Wheeler's. The bearings are designed to provide optimum support to the steering column with vibration damping characteristics.

MRS produces drawn cup (Sheet Metal) Needle bearings for specialized applications. These bearings are used wherein a very small cross section area is available and in application of low to medium loads. The designs offered are both Cage Guided and Full Complement Type. The typical applications catered by MRS at present are for automotive and industrial applications.

These bearings have barrel-shaped rollers between the inner ring, which has two raceways, and the outer ring which has one spherical raceway. Since the center of curvature of the outer ring raceway surface coincides with the bearing axis, they are self-aligning in a manner similar to that of self aligning ball bearings. Therefore, if there is deflection of the shaft or housing or misalignment of their axes, it is automatically corrected so excessive force is not applied to the bearings.

Spherical roller bearings can take, not only heavy radial loads, but also some axial loads in either direction. They have excellent radial load-carrying capacity and are suitable for use where there are heavy or impact loads. MRS Manufactures Spherical Roller bearing in the C & CD types.

MRS produces Spherical roller bearings with W33 which has groove outside on the Outer ring with 3 holes on it, this allows easy lubrication of the bearing after fitment thereby saving considerable design requirements.
Spherical Roller bearings can width stand misalignment in the bearing axis by 10 to 1.50 maximum based on the size selected and the loading conditions.
Incase if Spherical roller bearings are to be used for extremely low load applications or the ratio of Radial Load to Axial exceeds 0.20 then it may be necessary to consult MRS technical team prior to using in such application.

The Bearing arrangements of the bottom rollers in the drafting system in spinning frames and roving frames require uniform running in order to guarantee the highest quality yarn. Bottom Roller Bearings are precision needle roller bearings which excel through their high load carrying capacity and extremely accurate radial and side face run-out. A wide variety of Bottom Roller Bearings for supporting bottom rollers in Speed Frames and Ring Spinning Frames are available off the shelf while specific requirements are also catered to.

Bottom Roller Bearings are available with one piece plastic cage or split type steel cage, lubricating nipple and side or centre locating clip for various types and of Roller accommodate some misalignment in the Roller Stand and helps in distributing the load uniformly These are protected from contamination of dust and fly particles by particularly effective gap seals.

To mount the bearings on the stands, we recommend the following :
1 Light mineral oil should be applied on the journal seating. Care should be taken to ensure that the faces and journals of the bottom rollers are neither damaged or dirty .
2. The inner rings is a press fit on the journal A special tubular dummy should be placed against the Inner ring face and the force for mounting should be applied uniformly until the bearing ring abuts the face of the bottom roller. No sharp tool or pointed edge should be used against the bearing ring face. Use of a pneumatic cylinder is recommended over other methods.
3. After the rollers are placed on the stands and the holders are in position, the alignment in the longitudinal direction should be checked to ensure true running. Excessive misalignment can reduce the service life of the bearings

MAINTENANCE

Bottom Roller bearings can to a certain degree be called 'maintenance free". A few routine checks mentioned below will however assist in detecting any malfunction. 1. When the machinery is running, an industrial stethoscope may be used to monitor bearing noise. 2. Follow Lubrication routine of renewing (good quality) Lithium based grease every 4 to 6 months.

MRS has a capability of manufacturing various customer special bearings in-accordance to the application requirements. MRS can produce bearings with special coats and heat treatment processes wherein the standard products cannot be utilized.

Roller Bearings are designed to carry high loads with low cross section height there by saving space and offer more load carrying capacity. Bearings Produces Series of Roller bearings for application in various Industrial, Automotive and Textile Applications.

Roller Bearings are designed to carry high loads with low cross section height there by saving space and offer more load carrying capacity.Bearings Produces Series of Roller bearings for application in various Industrial, Automotive and Textile Applications.

Apart from the above sizes , Bearings has capacity to manufacture & develop special bearings as per Customer's Requirement including Ball Bearings , Cylindrical Bearings , Bushes , Cages , etc .Further reference please contactBearings.

Bearings supplied with Anti Rust Protective Oil & not Lubrications hence before use the Anti Rust Protective be removed and after removal of Anti Rust Oil , Lubrications be made . For Selection of Correct Lubrications please contactBearings . Also Incase of Bearings required with factory - lubrication , the same can be provided on request.

Roller Bearings confirm to ISO 1206 : 2001 standards with standard Tolerances. Mrs Bearings can produce at customer's demand tolerances specific to customers need's and requirements. The RollersBearings are of high grade (G2) class thereby improving the performance of the bearings of the bearings compared to the standard grade rollers.

The Typical Characteristics of the Standard Needle Roller Bearings produced atBearings are listed below.

MRS Produces single row deep groove ball bearings, They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. Deep Groove Ball Bearings are a excellent choice for applications requiring the below Characteristics

• Excellent for high speeds
• Good radial load capacity
• Acceptable axial load capacity in both directions
• Have low torque capacity at startup and running speeds
• Can operate with low noise
• Require little maintenance

MRS do provide these ball bearings with Seals of Metal / Rubber Configurations with seals on one side (Z / RS) or both sides (ZZ / 2RS) . The shield bearings supplied by MRS are pre lubricated for life.

MRS ball bearings are manufactured to ABEC Standards and Meets V2 Noise Levels.

textile bearings are manufactured using superior bearings steel, combined with high quality craftsmanship which ensures that they perform superior throughout their life span.

MRS Cylindrical Roller Bearings are characterized by High Load (Radial) & High Speed Capacity bearings. CRB utilized Cylindrical / Square Shaped Rolling elements, this Rolling Elements are precisely manufactured to attain the Objective of High Radial Load along with High Speed Applications. Limited amount of Axial Loads** are permissible to be applied in only One Direction for exact load limits you can contact our Sales Team for further guidance.

Cylindrical Roller Bearings are available in Various Configurations based on Cage Guided (Brass / Nylon), Full Complement, With Ribs and Without Ribs. Below Schematic shows the various configurations that are as standard withBearings.

Some General Applications for Cylindrical Roller Bearings

• Power Steering Applications.
• Axles for Heavy Commercial Vehicles.
• Industrial Applications like Machine Tool Industries.
• Port Handling & Marine Equipments.
• Mining.

MRS is one of the leading supplier to OE's in the Textile Application Field. MRS Exports this products to more than32 countries in the world right from Germany, Italy, Egypt, Indonesia, Singapore, Korea, China, Peu, Spain etc.

MRS textile products are manufactured using superior bearings steel, combined with high quality craftsmanship which ensures that they perform superior throughout their life span.

• Bearings for Spinning Applications :
• Bottom Roller Bearing
• Bloowroom & Ring Spinning Special Bearings
• Jockey Pulleys for Ring Spinning Machines
• Manual & Automatic Winding Machine Bearings
• Radial & Axial Cages & Bushes
• Special Customised Products for the Spinning Industry

MRS produces bearings for Automatic and Manual Cone Winding machines, the bearings produced by MRS are used in Winding Drums as Spindle Bearings, Adapter Bearings for Automatic Winding Machines

MRS produces clutch release bearings for Heavy commercial vehicles which finds applications in vehicles like Mercedes, Man, & BMC Trucks. MRS Clutch Release Bearings are manufactured using superior bearing steel along with components which can resist high operating temperatures. The clutch release bearings are greased for life time with Seals manufactured to ensure high operational temperatures with a minimum grease loss.