All metal construction A common body Two oscillating collecting boxes A common driving shaft with eccentrics / vibro motors Two / three oscillating sieve boxes   Applications:   For purifying and grading semolina and middling in flourmills.  

Bran Cutter is used for grinding of bran into finer particles.

• FeaturesEffective cleaning and grading machine.,Low power consumption.

The machine is used to classify and clean dry loose stock trough the action of a set of screens and air. It is recommended to be used together with an Air-Shifter.

Occupies little space, thus allowing freedom in selecting the most suitable and convenient location. Constant and uniform centrifugal action through the use of perforated sieve casing. Easily removable sieve casing. The beater rotor is also readily accessible. Applications: Bran Finisher removes the last trace of flour from bran, and produces a bran which is relatively free from starch.

Occupies little space, thus allowing freedom in selecting the most suitable and convenient location. Constant and uniform centrifugal action through the use of perforated sieve casing. Easily removable sieve casing. The beater rotor is also readily accessible.

an ideal machine for de-hulling of wheat & other grain mostly used in whole meal atta plant and dal mill plant the processing effect of the machine can be adjusted from outside by means of slide control device .

• Size2 ton, 4 ton & 8 ton per hour

the aspirator-separator are used for cleaning of cereals in granaries mills, grain storage, seed processing plants, dal mills, malt house, maize plants, starch plants, flour mills, etc. The aspirator-separator cleans cereals from impurities such as stones, earth cleads, sand, straw, chaff, dust, wood seed, strings, wood strings, empty corns, etc.

intensive scourer with aspiration channel features:   all metal construction with large side inspection door. special dead-box type inlet arrangement rotable through 360 degree for ease of planning-in. two-section scouring drum - first half solid, second half perforated sheet metal. special wear hardened beater blades incline mounted on rotating shaft. aspiration connection point to ensure dust-free operation. easy access to all areas for maintenance and cleaning.   applications:   the machine effectively removes outer husks and crease dirt by its intense scouring action, and will reduce in size and therefore remove through the sieve apertures. It also removes soil and loosens any adhering dirt from the outer layer of the wheat kernel. sizes available - 5 ton & 10 ton per hour  

  ‘MUKUL’ Chakki is used for grinding of wheat into Aata sizes available: 24" , 27" & 30"  

Occupies little space, thus allowing freedom in selecting the most suitable and convenient location. Constant and uniform centrifugal action through the use of perforated sieve casing. Easily removable sieve casing. The beater rotor is also readily accessible. Applications: Bran Finisher removes the last trace of flour from bran, and produces a bran which is relatively free from starch.

it consists of wheat wheel, spur pinion mounted on the end of the wheat wheel shaft. This is meshed with spur gear which is mounted on the end of the water wheel shaft. Water wheel is fitted with cups. These cups are fitted on to the water wheel by means of a nut and spring washer. These water wheels revolve in a water tank. The level of water is maintained in this tank by means of a float ball. The grain by its fall revolves the wheat wheel and its motion is imparted through the spur pinion and gear to the water wheel, the cups on the water wheel lifts up the water from the water tank and deposits into the semi-circular catach trough from where it flows into the inclined trough and out of the machine into the stream of grain. It will be clearly seen that the greater the quality of grain passing through the wheat wheel, the faster will it revolve and consequently more water will be lifted, the percentage of moisture addition to the grain thus remains constant. No power is required to drive these machines as the weight of grain falling on to paddles is sufficient to produce the motive power.

• Electric Motor0.5 HP Single Phase,
• Power Consumption220VAC
• ApplicationLaboratories