Multipack - MMC

Vatva, Ahmedabad, Gujarat

The Injectable Powder Filling Machine is ideal for adding injectable powder into vials. The exterior of the machine is essentially made up of stainless steel i.e. the parts of the machine that come into direct contact with air - such as container and rubber stopper etc. Furthermore, to service the machinery in the best possible manner and to ensure the best quality comes from this powder filling machine, the welded steel frame is also made using stainless steel which has access doors to it as well to increase the longevity of this automatic powder filling machinery.

During the operations of the machine, you will certainly realize the number of varied precautions and safety measures have been adopted keeping in mind the overall performance and high quality output of the machine. For example, there is a piston in each port and there are about 8 ports in each powder wheel. So, if you are also looking forward to buy one, you should certainly have a closer look at the technical specifications and the salient features given in the following few paragraphs.

• Sleek model of cGMP
• "No Vial, No Filling" feature makes the product economical
• Numerous Dosing Systems
• Digitalized counting system for production output
• Removable parts for compulsory sterilization process
• Irregular frequency of drive in order to control speed rate
• Safety precautions against overload and jams through contractors and relays
• Customized and independent drivers to run the filling and sealing processes separately
• Built-in rubber stoppering unit for high performance of this vacuum type powder filling machine
• High volumetric filling accuracy maintenance techniques

The Injectable Liquid Filling Machine is promoted for usage for customers who require machinery for filling injectable glass vials. Some of the major parts of the machinery include a conveyor belt, unique eccentric pre-gassing, fill ups and post-gassing of the vials. The machine consists of efficient and accurate syringes, synthetic rubber tubing with a non-toxic speciality and compact panels. All these parts have been manufactured using the best quality stainless steel for your machine.

The short distance between the filling feature and the stoppering unit minimizes the risks relative to contamination of the liquid from external air contact. This injectable liquid filling machine is designed in such a manner that it should be used in a sterile environment only and for usage in the laminar flow protection only. The part of un-scrambler has been especially designed to ensure that the dead ends are removed and it becomes easier to clean the spots.

• Compact GMP modelling
• Contact parts are all made of stainless steel of 316L and the other parts which will not come in direct contact with air or the liquid are made of 304 Stainless steel quality
• The feature of No Ampoule and No Filling system has been adopted
• The minimum change over parts are of 1 ml to 20 ml ampoule size only
• Centering around the ampoule neck while the process of flushing and filling are in progress is also done
• Nitrogen gas flushing is a high possibility before, during or after the filling process
• The machine is easy to clean and maintain since it is available with full accessibility
• Pre warming station is present
• Minimum over time change is required

The Vial Filling and Stoppering Machine has been manufactured specifically to be used for filling injectable glass vials. The basic components of the vials liquid filling machine includes a turntable, conveyor belts made of stainless steel, unique eccentric pre-gassing, filling and other post-gassing aspects. The syringes are made of excellent quality 316L stainless steel. Apart from this, it consists of non-toxic tubing made of synthetic rubber of reliable and durable quality. Furthermore, the compact panel is easy to access, reach and use.

Since the area between the machine that is responsible for filling the vials and the one responsible for stoppering the vials is less, hence, the risk of the contamination reduces considerably. It is very important to understand that the machine has been made to work specifically in a sterile environment to ensure that there is no contamination. These are designed for use under the laminar flow protection itself. The redesigning of the un-scrambler has been done to reduce the dead ends and increase efficiency of the spots that are difficult to clean.

• This is of compact cGMP model
• This is ideal for filling vials of 2ml to 250ml
• These are for piston pump/peristaltic pumps filling
• It provide high accuracy rate
• There is a system of No Vial-No filling and No Vial-Machine Stop to reduce wastage
• Systematic auto filling of the objects is designed through in-feed turn tables
• Reduction in any sort of cross contamination
• Easy validation processes
• A/C frequency setup to easily adjust the velocity
• Validation systems for cross check of bulk production
• Online mechanism
• Documentation through IQ/OQ
• Optional system of PLC with Graphical user interface

The Vial Filling and Plugging Machine was made to help in the filling of injectable glass vials with liquid. The machine majorly consists of a conveyor belt, turntable, pre-gassing, filling and post-gassing aspects. This Plugging and Capping Machine is made of stainless steel material of 316L quality which passes the GMP standards and assures the best return on investment in the longer run as well. Synthetic rubber tubes have been made and compact panel allows easy reachability.

Since the distance between filling and stoppering is pretty less, the risk in getting any contaminations reduces considerably. The Automatic Filling Plugging Machine clearly needs a sterile environment to work in. It also offers a laminar flow protection. Redesigning of the un-scramble has been done to remove the dead ends and clean the machine properly.

• It is ideal for vials that are of 2ml to 250 ml
• Compact cGMP model has been adopted
• Peristaltic or Piston pump has been used for filling the vials appropriately
• Accuracy of the machine is the highest as compared to its competitors
• The turntable that takes the in-feed has been attached to the machine for automated feeding of the objects
• Contact parts are made of AISI Stainless steel 316L material and the non contact parts of the machine are compiled of AISI Stainless Steel 304
• Contamination possibility is minimal
• Validation has been made easier for small or large batches both
• Speed adjustment through variable AC frequency drive is also feasible
• Counting can be done easily through the digital counter
• On-line systematization
• Validation documents of IQ/OQ