Muskaan Power

Dhandari Kalan, Ludhiana, Punjab

Built using superior quality components, our 1250 KVA Transformers spell only high performance in testing times. Because of their sturdy built, high quUpto 150 kVA Single Phase both 11 & 33 kV class Upto 40 MVA, 66 kV class Upto 20 MVA OLTC 33 kV classality components and its performance, these transformers are highly in demand in national and international markets. Distribution Transformers is also known as Auto Transformers. Distribution & Power Transformer: - Upto 150 kVA Single Phase both 11 & 33 kV

Built using superior quality components, our 1250 KVA Transformers spell only high performance in testing times. Because of their sturdy built, high quality components and its performance, these transformers are highly in demand in national and international markets. Distribution Transformers is also known as Auto Transformers. Distribution & Power Transformer: - Upto 150 kVA Single Phase both 11 & 33 kV class Upto 150 kVA Single Phase both 11 & 33 kV class Upto 40 MVA, 66 kV class Upto 20 MVA OLTC 33 kV class

Cooling tubes, radiators and corrugated tanks Pole mounted or ground mounted Free breathing or hermetically sealed CSP and Non CSP Winding-copper/aluminum (foil/rectangular wire/round wire) Fittings and accessories, cable Terminations: As required

We are engaged in offering an impeccable range of Three Phase Transformer Tanks. The offered tanks are manufactured using high quality raw material and ultra modern machines. Our offered tanks are widely used for housing transformers for electrical industries. The offered tanks are widely appreciated among our clients for their high durability and low maintenance features. Apart from this, these tanks are offered in diverse technical specifications as per clients demands. Off circuit tap changing switch tapping from 5% to - 5% in steps of 2. 5% for hv variation or as per customers requirement. On load tap changer - 16 steps oltc for hv variation from 5% to-15% in steps of 1. 25% or as per specific requirements. Oltc for remote / auto / parallel operation can also be offered

Power Servo Voltage Stabilizer Phase Single Phase, Three Phase Input Voltage 1 Output Voltage 66000 Minimum Order Quantity 1 Unit

Phase Single Phase, Three Phase Input Voltage 1 Output Voltage 66000 Minimum Order Quantity 1 Unit

Avail from us, quality Step Down Transformers that are equipped with latest features and their primary voltage is greater than their secondary voltage. This Step down transformers typically relies on the principle of magnetic induction that helps in converting voltage or current levels. Moreover, we offer Step Down Transformers at most competitive prices. Upto 15 MVA 11 & 33 kV Class

We are highly recognized for our high quality range of Oil Cooled Power Transformer. Our range of Oil Cooled Power Transformer is prepared using quality material and latest manufacturing technologies. We can prepare bulk orders of this product in a short span of time. These stations are high in demand as these are flawless and prepared using high-quality machines and other required raw material, sourced from the prestigious vendors of the industry. Cooling Tubes / Radiators / Corrugated Tanks Pole Mounted / Ground Mounted Free Breathing / Hermetically Sealed CSP / Non CSP Winding-Copper/Aluminium (Foil / Rectangular Wire / Round Wire) Fittings and Accessories, Cable Terminations etc.as required

Robust designing Sturdiness Optimum performance High tensile strength Off circuit tap changing switch tapings from 5% to - 5% in steps of 2.5% for HV variation or as per customers requirement On load tap changer: 16 steps OLTC for HV variation from 5% to-15% in steps of 1.25% or as per specific requirements. OLTC for remote/auto/parallel operation can also be offered The dry type transformer are manufactured to comply with National International Standards BIS, IS 11171, IEC 76

Multiple Shielding Techniques employed to reduce the inter winding capacitance to below 0.005 picofarad and increases DC Isolation to over 1000 Megaohms. Technically any transformer that has no direct current path between its primary & secondary windings provides isolation from any kind of leakage in Current, Spikes/Surges produced in the system. Provision of electrostatic shield in between primary & secondary winding depends upon its construction, specification & performance characteristics. Isolation/Ultra Isolation Transformer are being used to protect Electronic & Sophisticated equipments, CNC Machines from the excessive line voltage transients, spikes / surges produced in the system. Electrostatic shielding helps in grounding these spikes & not allowing to pass on to the secondary side of the transformer.

WE are one of the renowned manufacturers and suppliers of a wide gamut of DC Rectifier Transformers. These rectifiers are used for DC Application and are manufactured using high-grade raw material in accordance with industry laid norms and guidelines. All the products offered by us are widely demanded in the market for its various excellent features such as high efficiency and anti-corrosive nature. Input voltage: 380 - 440 Volts, 3-phase 50 Hz. AC supply Output voltage: Fixed Rated maximum DC voltage or variable from zero to maximum rated voltage Output current: rated maximum DC current Temperature Rise: Less then 35C above ambient at the top of the oil Efficiency : 12V rect - 82%, 24V rect - 90%, 100V rect - 94%, 200V rect-96% Ripple content: less than 5% Insulation: A class for oil cooled

Dry Type Transformer are totally maintenance free and safe from fire as material used are metals, ceramics, fiberglass and resin It is environment friendly as there is no oil, hence handing becomes easier and there are no chances of spillages and leakages & there is minimal non toxic smoke in case of fire. Dry Type Transformers is also known as Mining Transformer. Advantages: High level of safety No flammable liquids No pollution from leaks solution No toxic off-gasses Can be placed close to the load More efficient Increased emergency overload capability Improved reliability Low Noise and low maintenance Easy to repair (open coils)

We are engaged in producing Servo Controlled Voltage Stabilizers Transformers. These stabilizers are hugely in demand owing the latest technology it acquires and the quality of the built. We have a state-of-the-art facility to manufacture these stabilizers in house. These stabilizers are instrumental in controlling the voltage in high fluctuations and keep your equipments safe. Excellent Build Higher Durability Export Quality Power Saving ( Reduction in Power Bills ) Reduction in breakdown of electrical / electronic equipments Reduction in MDI Improvement in Power Factor (At Higher Voltage) Uniform Quality / Lesser Tripping Improvement in quality of end products Better Efficiency in Plant Unmeasurable Benefits

Being a customer focused organization, we are engaged in offering a wide gamut of Dry Type Electrical Transformers.These transformers are manufactured using quality approved raw material which we procure from reliable vendors of the market. All the products offered by us are widely acknowledged by our valuable clients for their excellent features such as robustness and sturdy designing. Further, clients can avail these products from us in various sizes, dimensions and other specifications Upto 5 MVA 33 kV class 50 kVA to 5000 kVA, 11 kV & 33 kV class suitable for indoor applications with off circuit tap links, off circuit tap switch, on load tap changer (indigenous & imported) The dry type transformer are manufactured to comply with National International Standards BIS, IS 11171, IEC 76

Being a customer focused organization, we are engaged in offering a wide gamut of cast resin transformer.These transformers are manufactured using quality approved raw material which we procure from reliable vendors of the market. All the products offered by us are widely acknowledged by our valuable clients for their excellent features such as robustness and sturdy designing. Further, clients can avail these products from us in various sizes, dimensions and other specifications.Technically any transformer that has no direct current path between its primary & secondary windings provides isolation from any kind of leakage in Current, Spikes/Surges produced in the system. Provision of electrostatic shield in between primary & secondary winding depends upon its construction, specification & performance characteristics. Isolation/Ultra Isolation Transformer are being used to protect Electronic & Sophisticated equipments, CNC Machines from the excessive line voltage transients, spikes / surges produced in the system. Electrostatic shielding helps in grounding these spikes & not allowing to pass on to the secondary side of the transformer. Range: Upto 5 MVA 33 kV class 50 kVA to 5000 kVA, 11 kV & 33 kV class suitable for indoor applications with off circuit tap links, off circuit tap switch, on load tap changer (indigenous & imported) The cast resin transformer are manufactured to comply with National International Standards BIS, IS 11171, IEC 76