Sarawak, Malaysia
Write a Review
Our Products
We are leaders in the market for providing best range of Plastic Granules and Virgin HDPE Granules
We are a prominent Plastic Granules Manufacturer, Exporter, and Supplier in Malaysia. Our Plastic Granules include LDPE Granules and HDPE Granules. HDPE (High-Density Polyethylene) : Is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn, etc.
LDPE (Low-Density Polyethylene) : Its resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
Specifications
| Item | Test Condition | Test Method | Value |
|---|---|---|---|
| Density (g/cm3) | ISO 1183 | 0.944-0.955 | |
| MFR (g/10min) | 1900C/2.16kg | ISO 1133 | 0.03-0.07 |
| Tensile strength at yield(Mpa) | ISO 527-2 | 22 | |
| Elongation at break(%) | ISO 527-2 | >350 | |
| ESCR (h) | F50,500C,100% | ASTM D-1693A | 1000 |
| VICAT( 0C ) | ASTM D-1525 | 126 |
We offer Virgin HDPE LDPE LLDPE granules. Film Grade HDPE Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 gcm3 MFR 190C2.16kg ISO 1133 0.03-0.07 g10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50, 50C, 100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C Blowing molding Grade HDPE Item Test Condition Test Method Value Unit Density ISO 1183 0.9500.955 gcm MFR 190C2.16kg ISO 1133 1.72.5 g10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 % Injection grade HDPE Item Test Condition Test Method Value Unit MFR 190C2.16kg ASTM D-1238 20 g10min Density --- ASTM D-792 0.954 gcm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJm2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C Application: For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : 25kg/bag , 20mt/20'fcl
Delivery Time : 15 days
Mohammad Ali (Chemical Distributor Limited)Jln Tabuan, Ktld Taman Westwood,Rn93100 Kuching, Sarawak, Malaysia
Share us via
