Write a Review
Our Products
We are leaders in the market for providing best range of HDPE Granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength.
Film Grade HDPE
| Item | Test Condition | Test Method | Value | Unit |
|---|---|---|---|---|
| Density | 22 | ISO 1183 | 0.944-0.955 | g/cm3 |
| MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
| Tensile Strength at Yield | - | ISO 527-2 | 22 | MPa |
| Elongation at break | - | ISO 527-2 | >350 | % |
| ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
| VICAT- | - | ASTM D-1525 | 126 | °C |
Blowing Molding Grade HDPE
| Item | Test Condition | Test Method | Value | Unit |
|---|---|---|---|---|
| Density | - | ISO 1183 | 0.950~0.955 | g/cm |
| MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10mi n |
| Tensile Strength at Yield | - | ISO 527-2 | 24 | MPa |
| Elongation at break | - | ISO 527-2 | >600 | % |
Injection Grade HDPE
| Item | Test Condition | Test Method | Value | Unit |
|---|---|---|---|---|
| MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10mi n |
| Density | - | ASTM D-792 | 0.954 | g/cm3 |
| Tensile Strength at Yield | - | ASTM D-638 | 28 | MPa |
| Elongation at break | - | ASTM D-638 | 250 | % |
| Impact tensile strength | - | ASTM D-1822 | 42 | kJ/m2 |
| ESCR | - | ASTM D-1693 | 3 | 1 |
| VICAT | - | ASTM D-1525 | 128 | °C |
Mr. Ghita Sandhu (Trade Investment Group)
64A-2, Lorong Batu Nilam 6B - 42000, Malaysia
Share us via
