N. P. Manek Enterprises Ahmedabad, Gujarat

• TUBE packs5g(Mech), 9g, 13g, 36g, 90g, 180g, 270g
• Industrial packs450g, 700g, 900g & 1.8kg

ARALDITE Standard  is a two component epoxy adhesive and bonds strongly almost anything to anything.   Features: Worlds Strongest Bond Versatile No Shrinking after curing Prevents sagging   Uses:   ARALDITE Standard  bonds anything to anything like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc. However it is not suitable for plastics like HDPE, PTFE and silicon rubber.      How to Apply: Clean both the surfaces to be bonded. Take equal quantities(by volume) of resin and hardener of Adralite Standard. Mix the resin and hardner until it forms a uniform colour. Apply a thin coat of the mixture on both the surfaces. Join the surfaces and apply pressure using tape, clamps or band. Remove the pressure after 6 -8 hours. Full strength is achieved in 24 hours.

• Packings:7g (Blister Pack), 26g, 105g & 875g

ARALDITE Rapid  is a two component epoxy adhesive and bonds strongly almost anything to anything. Features: Worlds Strongest Bond Versatile No Shrinking after curing Prevents sagging Rapid setting in 10 minutes Odourless Uses:   ARALDITE Rapid  bonds anything to anything like metals, ceramic, marble, plastic, glass, wood, rubber etc.  ARALDITE Rapid  is ideal for emergency repairs.    How to Apply: Clean both the surfaces to be bonded. Take equal quantities(by volume) of resin and hardener of  ARALDITE Rapid . Mix the resin and hardner until it forms a uniform colour, after mixing use it within 10 minutes (at 25 degree Celsius) Apply a thin coat of the  ARALDITE Rapid  mixture on both the surfaces. Join the surfaces and apply pressure using tape, clamps or band. Remove the pressure after 3 - 5 minutes. Full strength is achieved in 2 - 3 hours.

• Packings:10g (Blister Pack)

ARALDITE Steel Epoxy  is a two component epoxy adhesive and bonds strongly to all metals.   Features: Worlds Strongest Bond Versatile Rapid setting sets in 4 minutes Odourless Steel filled Ideal for all repairs to metals   Uses:   Automotive repair, engine parts, exhausts, radiators etc. industrilal tools, marine repairs and household general metal repairs.   How to Apply: Clean both the surfaces to be bonded. Take equal quantities(by volume) of resin and hardener of  ARALDITE Steel Epoxy. Mix the resin and hardner until it forms a uniform colour, after mixing use it within 4 minutes (at 25 degree Celsius) Apply a thin coat of the mixture on both the surfaces. Hardens in 10 minutes, can be matched after 1 hour, attains full strength in 2-3 hours.

ARASEAL  is a two component epoxy compound having excellent bonding properties and resistance to chemicals.   Features: Seals, Bonds, Fixes & Holds PHENOL free Available in 3 variants   Uses: Sealing blow holes, cracks and leakages in ferrous and non-ferrous castings. Sealing cracks in wooden and metal patterns/fabrications. Sealing and insulating cable terminals, cable entry into switch boxes, machines etc. Sealing leakages in transformers, oil-circuit breakers and other switchgear. Filling body dents & cracks Sealling leakages in radiators, petrol/diesel tanks, water tanks, engine blocks etc. Repairing and sealing of all sanitary applications. Moulding into decorative articles.   How to Apply: Take equal quantities(length) of resin and hardener. Kneed till uniform colours are obtained. Apply on a dirt-free, clean surface. Machining, drilling, polishing can be done after 24 hours. Applications of indirect heat accelerates the setting.

• Jar:125g, 250g, 500g, 1Kg, 2Kg, 5Kg, 10 Kg, 20Kg, 30Kg, 50Kg.
• Pouch Pack:1Kg

ARALDITE Karpenter  is a synthetic Resin adhesive in the form of a milky white viscous paste used for bonding wood, plywood, laminates, veeneers, particle boards etc. to each other.    Features: Ready to use Heat / water resistance Unsurpassed bonding strength Economical in long run Higher coverage Specially formulated for vertical / flat lamination Excellent spreadability Mild odour & eco friendly New international packing Saves time & labour Higher shelf life   Uses: All types of Wood Working (For bonding Plywood, Laminate, Wood, Veeneers, Block Board, Particle Board, MDF to each other.) Furniture Industry. Handicrafts. Sport Goods Manufacturing. Book Binding / Packaging / Paper tubes. Fabirc Starching. Wall paper fixing. Transformer Industry. Carpet Manufacturing.     How to Apply: Clean both the surfaces to be bonded. Stir the container well before the application with a wooden stick / glass rod. Dilution is not recommended, as it is a ready to use material. Apply a thin coat of Araldite KARPENTER PVA on both or one side(as per requirement) Spread the adhesive evenly in about 5 - 10 minutes. Press the two surfaces together and keep it under pressure till the adhesive is completely dried. Pressure can be in form of clamps, nails, wooden support, etc. The excess adhesives on joint / sides should be wiped out with a wet cloth. The pressured can be removed in after 5 - 6 hours in case of hot climate and whereas the pressure can be removed after 20 to 24 hours in case of Monsoon or Cold climates.   Precautions & Limitations: Keep the container tightly closed when not in use. Wash hands thoroughly after handling Store under ideal conditions in cool & dry place.